Server 2008 Network issues: supposed routing problem

Similar Questions

• Tengo el mismo problema con Windows server 2008 r2 (x 64) (same problem)

  Quiero recover form security incursions con Windows Server 2003 SBS in Windows server 2008 r2 (x 64), Biogen trabajando con el ultimo parchment http://support.microsoft.com/kb/974674 (ID of Article: 974674 - last review: January 27, 2010 - revision: 2.0) y baje las versiones in Inglés y Español (updated for Windows Server 2008 R2 x 64 Edition (KB974674)) y en ambos casos el message are the same "the change are no aplicable al equipo" el server are UN hp ml350 con una cinta hp dat 72 the same as use para los realize aid for storage. The the CA BACKUP sin problemas con utilizo cinta. Habra mas nuevas plots that only estoy instalando del 27/01/2010. El of y ingles El HOTFIX (http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=974674&kbln=en-us) are only en WS2008 R2 (standard) as yo tengo esta in Spanish. Hace mas of months than any I can recover los datos anteriores... Ayuuuuuudaaaaaa!

  Unfortunately, the Microsoft Answers is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for visiting Microsoft Answers. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get activation for Server 2008 (network attached) phone number, because the error 0x8010002E stops the process.

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  Hey bito808

  Here is the vista forums

  Try Server forums

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Walter, the time zone traveller

• customer has windows 7 on a Server 2008 network, my computer shows network duplicate readers who use all 26 letters. Just 2 mapped. Any ideas?

  Windows 7

  Server 2008 standard Edition.
  customer must only 2 mapped drives.
  all the letters of the alphabet are now used.
  sucks...
  all thoughts.
  Thank you
  Bill

  Hello

  That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Server 2008-6801 Firewall service error problem

  Heres is good, uninstalled Sysmantec endpoint on server 2008 (trial version), now the fire wall fails 6801, tried all that I find, this kills me that I need to activate RDS connections and can't not without windows allowing exceptions to the firewall... Purchase service not started, I checked registery KB943996-based, service dependencies are all operational,... but question 6801. .any suggestions? Need help!

  Thanks in advance

  DS

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2008 R2 comments: swap file problem

  I have several guests Windiows Server 2008 R2.

  What is the best way to rate, and then place the Windows swap file?

  For the physical Windows servers, many people suggest to allocate a fixed size page file whose size is 1.5 times the RAM: does make sense for virtual machines hosted as well?

  Is there a best practice or guideline to refer to?

  Concerning

  Marius

  
  

  Marius - Roma wrote:

  What is the best way to rate, and then place the Windows swap file?

  For the physical Windows servers, many people suggest to allocate a fixed size page file whose size is 1.5 times the RAM: does make sense for virtual machines hosted as well?

  Is there a best practice or guideline to refer to?

  As noted by A.P. the 1.5 x that RAM is really just an arbitrary number someone at Microsoft came at a time with and then walked into best practices with no real valid reason.

  However, it could be a few things to consider:

  Leave for the managed system is the easiest way, but could lead to a greater fragmentation of your C: drive.

  If the definition of a fixed size you should really consider to approve how much space you like Windows to be able to push in the pagefile with an internal memory. Usually if the machine Windows have a decent amount of RAM and page file usage is quite low.

  If adding an another virtual hard disk to the virtual computer and put the pagefile.sys on which you have a little more complex configuration, but could achieve savings if possible to exclude that drive in your backup tool and replication VM settings (if used). You could also possible to put all the files of comments VM on a sort of thin provisioned LUNS/NFS because it consumes a lot of space, but be used very little.

• CF8 on 32-bit Server 2008 installation Issues

  Install new Server 2008 with IIS7, new download CF8 developer version (not the 64-bit version).  The administrator will not be displayed.  When I go to the administrator, I get a 404 not found error.  When I browse Explorer (not IE), it is there.  Everything is installed in the default folders.  I added the MIME Type (application/x-cfm) .cfm via the Service Manager IIS and that did not help.  Our other servers are Server2003 and install CF8 was a breeze.  We can view HTML pages.

  Anyone have any ideas?

  This might help:

  http://www.jasonholden.com/blog/index.cfm/2008/5/6/ColdFusion-8-on-Windows-Server-2008

  Ken Ford
  Adobe Community Expert - Dreamweaver/ColdFusion
  Adobe Certified Expert - Dreamweaver CS3
  Adobe Certified Expert - ColdFusion 8
  Fordwebs, LLC
  http://www.fordwebs.com
  http://www.cfnoob.com

• SBS 2008 - Server 2008 site to site vpn problem.

  Hi all

  I have a box of SBS 2008 I want to add another server to the remote site (standard 2008). Currently, VPN works great on SBS and I can compose anywhere via the pptp network and join.

  I added the RRAS branch again 2008 server role. Connection to the configured application, since VPN was already running on SBS, I just added to the request and the road. Both servers have user names Eric their numbering interfaces to, when I connect branch to SBS, he just connects in seconds, get IP address and routes are added, when I check the SBS it appears as inaccessible, when try to connect manually I either get error RRAS 0 or a pop up says the modem is already in use or not properly configured.

  Grateful if someone can the advice that I've spent 2 days on this.

  Thanx

  If you can repost this thread under http://blogs.technet.com/b/windowsserver/, you can get a lot of fruitful discussions, solutions...

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Compaq Presario CQ1 1000: network drivers for Compaq Presario CQ1-1020 all-in-One desktop PC running Windows Server 2008

  Hello. I am trying to create an area of origin. I know I have to use more computers in the domain, but this is not the point. I was wondering if someone could help me find a driver for Server 2008 network for my computer (or someone could build one but I heard that takes a lot of effort). The original network driver has become unknown when I installed the operating system. I am also aware that I should use a newer computer for this but I can't afford to buy one now and I can't seem too creating a on a virtual machine. Also, I searched all over the internet and there are drivers for my computer, but not for the operating system I. Any help would be greatly appreciated. Thank you!
  
  P.S - computer is in the subject if you have not already guessed.

  Hello:

  It is possible that the file have not checked out pilots in their folder.

  To do this and then try to manually install the driver.

  Download and install this free utility for files.

  1 file listed is for 32 bit.

  http://www.7-zip.org/

  After you download and install 7 - zip, download and register but do not sp46403 run.

  Right-click on sp46403 and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and leave it to decompress the file in the sp46403 folder.

  Then try to manually install the drivers, but navigate to location 7-zip extracts the sp46403 driver file to.

• database pervasive for Windows server 2008

  I am using Windows Server 2008 R2, I have a problem with the SQL database process eating my physical memory.  Is there a way to limit the amount of resources that he can shoot.  Also of databases SQL and Pervasive work well together or they can cause problems between them?

  Hello

  Your Windows XP issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forum Windows Server, you can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservermanager/threads/

• Problem with Server 2008 window after delete "pending.xml" not a good way.

  Hello

  Actually, I was stuck at stage 3 of 3 window 2008 Server Update. I solved this problem by performed only "del c:\windows\winsxs\pending.xml" on the installation disc - invite to dot. After that, I could access my desktop. But there was another problem occur as shown below:

  (1) I could update the file in the window, but I could not update the last update file that is the window Server 2008 previously stuck.

  (2) network icon shows no internet connection, but I have always seen my ip address in internet explore and remote computer could still connected, but displays error cannot access the office. I double click on the network icon, it shows "Unknow" "the dependency service or group could start. I can't not verification of diagnosis. It shows me start "policy and network access Service" in the Services. I try but pop up error message.

  (3) in the Server Manager, role summary shows Red Cross serving files, network and Access Services, Terminal Server Services strategy and the Web

  Server (IIS).

  (4) antivirus software cannot start properly.

  You have an idea to solve my problem?

  Thank you very much and best regards, Teresa.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server 2008 R2 gets really slow, loses the connection, network printers.

  I have a Windows Server 2008 R2, Dell PowerEdge T610 which very often at a time, it is really slow, loses the connection to all network printers and network resources are limited. We check scheduled task, updates of Windows and go on throughout this period. We check the event viewer, and there is nothing extraordinary. Does anyone have any ideas or suggestions?

  Hello

  Sorry for the inconvenience that you are experiencing.

  Since we are unable to help you better on the problems associated with Windows Server 2008 R2. Our TechNet team have the expertise to help guide you accordingly.

  That's why I ask you to please get in touch with our TechNet support team to resolve the issue.

  I appreciate your cooperation in this regard.

  Hope this will answer your query.

• Only the Server 2008 machines, poor network performance

  The environment contains 2 x IBM x 3650 servers. The virtual machines that all have two 8 GB of RAM and 4 vCPUs allocated. ESXi 5.1 build 1065491

  
  The network consists of about 40 machines Windows 7 (physical) and 2 servers (ESXi VMs) who are Server 2008 Std ed (one is a SBS 2008 but they are the same "under the hood"). The network is a gigabit w / D-Link switches. It started with me investigating slow network speeds.

  I use iperf to nail down what is happening. It appears when a Win 7 machine is writing data to SMB in 2008 virtual machine, it works fine. But when the W 2008 Server VM tries to write data to SMB in the Win 7 (physical or virtual) machine, I got hurt. Difficulty is the very sporadic network speed jumps between 1 MB/s to 60 MB/s. On average, I'd be lucky to hit 20 to 30 Mbps which isn't even 50% of the gigabit network util.

  At first I thought that the problem may be with the ESXi config so I gave a whole new Windows 7 VM on the same hypervisor which houses the two 2008 VMs server and re-ran the test - when I run a test of my workstation (physical) to the VM 7 Win, it works very well (90 to 100 MB/s both ways). If - Win 7 seems to be good, but both the VM Server 2008 I've got exposed the slow download issue.

  So far, I did the following on Server 2008 VMs:

  • Replace the E1000 w / VMXNET3 NIC
  • Dissolved the 802.3ad aggregation of links to the ESXi servers
  • Make sure that energy saving is off
  • Disable Offload TCP segmentation
  • Uninstalled the AV in case the problem was some kind of antivirus real-time analysis
  • Place the virtual machine on the other x 3650 - the question of speed follows the virtual machine.

  I can't think what to try next. Any advice or ideas welcome.

  Here are the results of a test my W7 desktop for Server 2008 VM: http://pastebin.com/dGZKwxAr

  Now the same test of my W7 desktop to and a W7 VM on the same ESXi host: http://pastebin.com/fugjCvjx

  I did an upgrade on the spot of one of the virtual machines 2008 2008 R2 server and it solved the problem. I'm getting 100 + Mbps in both directions of Win 7 clients now. I think I'll do the same thing to the other server.

• RAM problem in Server 2008 R2 Ent Version

  Hi friends,

  We have server HP ProLiant DL580 G7 with OS server 2008 R2 64 Bit Enterprise Version. On this server total RAM is 64 GB, which only 16 GB of memory usable is showing.

  Performed troubleshooting:

  1. Update server BIOS version.

  2 installed the latest operating system patches.

  3. all newspapers of material shared with the team of HP.

  After all steps above still question is the same. If one has the solution for this problem, please help me.

  
  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home