Server 5.2 php pgsql.so module does not

Similar Questions

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Toshiba common modules does not work properly

  Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

  Anyone know what this means?
  I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
  Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

  I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
  Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

  Please let us know if everything works well again.

• Error 28000 (licensing module does not have) on the installation of Acrobat DC.

  I receive the error 28000 (licensing module does not have) on the installation of Acrobat DC. The installation is on a new computer Windows 10 Pro. Installation was attempted at the start using Dell's digital delivery program, but have also tried installing after downloading directly from Adobe. I used the cleaning tool and tried to install it again with the same result. I tried installing using the administrator account with all services non - Microsoft Startup and antivirus disabled and received the same error message. I restored the system to a point before the initial setup attempt was made and tried to install it again and received the same error.

  Hi jeffreym27466292,

  You can refer to another thread on the same question and try the steps.

  Error 28000. Installation of the Module of licensing Acrobat failed?

  Let me know how it goes.

  Concerning

  Sarojini

• My Slideshow module does not work.

  The slideshow module does not work. It stays on a black screen, or return with a module error. Help me!

  Hi donaldwoodruff,

  Please turn off the graphics processor in the Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• Web module does not properly

  Hello

  I have the latest version of Lightroom 2015CC, and the Web Module does not work. I'll try to attach a screenshot (bear with me, this is one of the first times using this forum for me) but the window 'main' Center just basically says loading and never loads correctly (any model you try select). I tried to have representatives of Adobe look at it but frankly when it takes them 10 to 15 minutes to do one thing, it is very slow and I do not have a 6 hour block of time to race through their entire playbook. (I wish I was a joke, but it's very slow to watch with my PC control) It's on a system Windows 10. So far, we have eliminated the GPU acceleration as the cause (there be it with this preference checked, or unchecked) it is not the specific library, he does it with any library. Heck I even uninstalled and reinstalled Lightroom to my machine. Other thoughts on this are greatly appreciated.

  

  Of all the strange things that I had a problem with Windows 10 and the little settings/app/planter matter what they call it now does not work. It got to the point where Microsoft technology has me reinstall Windows 10 (who managed to install, but not kill everything on my computer so it was nice), but in this process in somehow the Web module was thus corrected, so not sure what wasn't happy, but he's back!

• Application module does not record the client interface

  Hello.
  
  The problem is that the application module does not record the client interface that is automatically generated classes.
  
  Whenever I go to the module of the application and add them, they will be gone next time I open the workspace. Is this a known bug or is there something that I am missing?
  
  I use jdev 11g relsease 2 version 11.1.2.3.0.
  
  Please help, because I can't get anything done.
  
  TIA

  Possible cases:
  -There is something wrong with the method you created.
  -The return type does not match

• powerCLI modules does not

  I am at a loss.

  I have a script PowerCLI what fires on a VM created "event in vCenter

  The script runs a batch file that looks like

  PowerShell.exe - file 'C:\Scripts\alarms\VMcreated\scriptName.ps1' > > c:\temp\log.txt

  scriptName.ps1 is essentially

  . "C:\Program Files (x 86) \VMware\Infrastructure\vSphere.

  SE connect-ViServer

  I end up getting Connect-VI: command does not exist.

  I seems that the script is not load modules when running under the system without shell account, but made as the system user when in a shell.

  I run this manually, because the user nt AUTHORITY is a ps shell started by psexec and it works fine.

  If I put a VICommand Get there it works but has no commands available.

  Any ideas why it does not work?

  Using Windows 2012R2 for CLI VCenter and power 6.3 U1

  Attached script.

  Dion

  It came as I have to apply it on a new Server 6.0 vCenter (as we had it setup on 5.5):

  http://blogs.VMware.com/PowerCLI/2009/09/how-to-run-PowerCLI-scripts-from-vCenter-alarms.html

  I'm finally in desperation rebooted the system windows and now everything works fine.

  We have no idea of how he got in this State and have attempted to replicate the possible actions that can have this done are and were able to fail again.

  Very strange.  But listened to learned.

  In the case of any doubt.  Reset.  I thought we were past these days, but alas.

  Thank you.

  Dion

  Update: exactly the same thing happened in production.  Restarted server - problem solved again.  Weird.

• PHP and several DB does not

  Hello
  I've been all day trying to find clues on how to get data from two SSID on the same server (under Oracle 10 g and PHP5 w/BRC)
  I'll explain:
  
  The Oracle server has two schemas: data and global.
  
  Data: localhost:1521
  SID: datos
  
  Global: localhost:1521
  SID: global
  
  in PHP, this is the connection that I try now, after a day of whola I tried to simplify to the maximum:
  
  Line: -.
  
  <? PHP
  
  
  STATEMENT 1
  @ $link = oci_connect ("user", "password", "localhost" / "global");
  
  echo "oci_fetch_array < br >".
  $stmt = ociparse ($link, "SΘlectionner the rut of USER");
  ociexecute ($stmt);
  While ($r2 = oci_fetch_array ($stmt, OCI_BOTH)) {}
  echo $r2 ["id_usuario"];
  }
  
  OCIFreeStatement ($stmt);
  
  
  STATEMENT 2
  
  @ $conn1 = oci_new_connect ("user", "password", "localhost" / "data");
  
  $SQL = "select id_usuario from USUARIO where id_empresa = '2'";
  
  $stmt = ociparse($conn1,$SQL);
  ociexecute ($stmt);
  
  {while (OCIFetch ($stmt))}
  $valor = OCIResult($stmt,1);
  }
  echo $valor;
  OCIFreeStatement ($stmt);
  
  ? >
  
  The two sentences are tested and working, so there is no problem in PHP code.
  
  * I noticed that any kind of code I try, it always seems to access only the "BOLD"datos * fat * scheme and key even never the overall scheme.
  
  Errors I get from this code:
  WARNING: ociparse() expects the parameter 1 resource, boolean in www\index.php on line 12 D:\
  WARNING: ociexecute() expects the parameter 1 resource, null in www\index.php on line 13 D:\
  WARNING: example with oci_fetch_array() expects parameter 1 resource, null in www\index.php on line 14 D:\
  WARNING: ocifreestatement() expects the parameter 1 resource, null in D:\ www\index.php on line 18
  After that, I managed to get the result of the second statement... so confused
  
  * At the beginning I used the sabe user and the password for the two schemas, now I changed the. At this time the error has been linked to tables that did not exist so I'm at the conclussion that PHP was only access to the content of the data schema, as I have before menctioned.
  
  
  
  I don't know who else to do and I seriously think following the death of another language.
  
  I did a Sw in Java that also access these two databases, it works perfectly, so I think maybe it's me who do not know how to write in PHP, or BEAK of PHP which can't stand not this type of access to data bases.
  
  If someone could show me a few clues I'll be gratefull.

  Well actually the @ signs are there so the "PHP Warning: Division by zero" is disabled.
  always the connection have always worked perfectly for me, it's just a warning.

  Well, with this bug in your code the connection did not what you think it does. Or make. Fix this problem first. Then we might be able to help with your technical problems.

  Review of p 103 manual current Underground for the syntax of the connection.

• View IE module does not properly

  I have the IE see the module installed (version 1.5.6) to still open and run Microsoft Updates in Internet Explorer. It works in that, when I select Microsoft Update of my favorites, a window opens.
  BUT that window then tells me that I need to run Internet Explorer version 5 or above and so update can not work - BUT BUT BUT I'm running IE version 7.
  So it seems to me that THE View does not work properly.
  How can I fix this? I can't find any help on the site IE.

  I am running Windows XP with SP3; Firefox V 23.0.1; and IE View 1.5.6

  Bolehill:

  You are running Windows XP. The most recent/last IE for XP version is IE8; IE9 and higher will not work under XP.

  • Suggest that update you to IE8 - http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8

  I've never used IE View. Instead, I use IE Tab 4.0.20130422. I just used it yesterday to run Microsoft Update. I had to make a change to an other add-on similar to this add-on in the past year, as the previous add-on I used work more evenly. My suggestion for you: consider uninstall IE View, since it does not work for you and install IE Tab. In addition, the product that I use doesn't have this option "purchases of price comparison" like IE View; I consider as "spyware".

  • Use the following link for IE Tab 4.0.20130422 there are several similarly named Add - ons- https://addons.mozilla.org/en-US/firefox/addon/ie-tab/

• L10-202: ACPI Module does not work with Linux SUSE 10

  I bought a Toshiba laptop L10-202 a few weeks ago and tried to install SUSE 10 on it. The installation went well but I have some problems with ACPI modules.
  I know that Toshiba recommends Windows XP but I have nowhere to ask for help because I could not find help on Linux forums. I should mention that I've recompiled the kernel because I considered that this was not necessarily.
  So far, the modules ACPI informs me on the temperature of the processor (57 degrees Celsius, the fan starts and at 52 degrees Celsius, it stops) and the only function that works is suspension on HARD drive. The battery level is not indicated because there is no file in/proc/acpi/battery/to read information on the battery. Except another ACPI hardware was detected by SUSE installation and works very well. I couldn't use the Toshiba_acpi module because this laptop has a Phoenix BIOS, but this isn't a big problem.

  You have an idea why ACPI does not work on SUSE and how could I solve the problem?

  Don't you think that there is no danger for the laptop to continue using SUSE, which limited the work of ACPI modules could cause damage to my laptop or it is safe to use SUSE?

  Thank you!

  Hello

  Well well, in my own opinion it s desirable that all functions of the laptop should work properly. But I put t think he might of s for laptop computer continue to use the Suse10.
  I would recommend using the other Linux distribution. That use you the Knoppix. This Linux you can stat from a CD or DVD and it works like a normal Linux operating system and you can also use the Windows XP.

  Little info on ACPI:
  With ACPI, the operating system can turn off devices, such as CD-ROM drives, when they are not in use. Another example: ACPI will enable manufacturers to produce computers that automatically turns on as soon as you touch the keyboard

  Good bye

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this:

  

• Server 2008 R2 Active Directory Certificate Services does not start

  Hello

  I had a power failure on both of my units of WD Sentinel DX4000 running Windows Server 2008 r2. Come to fine and checked the integrity but now a unit gives me an error and does not start the Active Directory Certificate Services. I checked google and read where I need to run the eseutil.exe on the CA database, but discovered that utility is provided only with the server Exchange that I'm not running. Is there another utility that allows you to defragment and correct the Microsoft database. Here is the error I get when you try to start it:

  Log name: Application
  Source: Microsoft-Windows-CertificationAuthority
  Date: 28/07/2014 06:01:39
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: SYSTEM
  Computer: WDOffice
  Description:
  Certificate Services Active Directory did not start: could not initialize the connection of database for WDOFFICE-CA.  Error 0xc8000147 (SEE:-327).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      17
      0
      2
      0
      0
      0 x 80000000000000
     
      40337
     
     
      Application
      WDOffice
     
   
   
      WDOFFICE-CA
      Error 0xc8000147 (ESE:-327)
   
  

  Any help would be greatly appreciated,

  Thank you

  Bob

  BBob

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.