Server and storage suggestion

Similar Questions

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• When the creative cloud installs an update happens to 5%, and then he said: try to connect to the server. Any suggestions

  When the creative cloud installs an update happens to 5%, and then he said: try to connect to the server. Any suggestions

  Please refer to the document:

  • Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
  • Error download or update Adobe Creative Cloud applications
  • Connect to CC - stuck on "Installing update..."

  Concerning

  Stéphane

• ASA VPN server and vpn client router 871

  Hi all

  I have ASA 5510 as simple VPN server and 871 router as simple VPN client. I want to have the user ID and permanent password on 871 and not to re - enter username and password since 871 uses dynamic IP address and every time I have to ' cry ipsec client ezvpn xauth "and type user name and password.

  any suggestions would be much appreciated.

  Thank you

  Alex

  Do "crypto ipsec client ezvpn show ' on 871, does say:

  ...

  Save password: refused

  ...

  ezVPN server dictates the client if it can automatically connect with saved password.

  Set "enable password storage" under the group policy on the ASA.

  Kind regards

  Roman

• How can I get rid of the parameter/folder synchronization and storage

  In our account settings, we have a parameter/folder synchronization & storage how do I get rid of it

  Why? This isn't a folder that you store emails in, its part of an IMAP accounts Setup.
  In IMAP e-mails are kept on the server and synchronization MUST intervene to allow you to delete, move, etc to have your file server and your T-bird records show the same mails.

• How can I save only mail sent on the server and do not have thunderbird download everytime I open the program?

  IMAP and everytime I open Thunderbird is so slow because it's downloading my mail sent to server. I want that my sent mail stored on the server and no hard disk.

  you have your mail on your computer or you do not. I guess that you I don't camp.

  Right-click on the account in the folders pane, select settings.
  Synchronization and storage deselect messages to store for this account on this computer.

• Is possible to create the WINS resource record in DNS server and how?

  Is possible to create the WINS resource record in DNS server and how?

  No resource record WINS I can create when it right click on and select "other new records".

  If you were using abusive or foul language, insults, etc. He would get you banned from the forum.

  If you have done any of these, then I suggest that you do the following:

  If banned, ask reason why and offer him your defense

  If not banned, then let them know the name of the person "you kicked off the forum" reports of ill-treatment.   They will study.

  If you haven't seen any action on your report, and suspect that the Forum is not being actively monitored, you can request action by clicking the Site feedback link at the bottom of any Forums page.   -Taken from

  Forums Help FAQ

  http://social.technet.Microsoft.com/wiki/contents/articles/7359.forums-help-FAQ-en-us.aspx#197

  We get off topic with this conversation and the COC States:

  Keep the topics of conversation on track. ............

  .......... Discussions can be blocked in the forum comments if necessary.

  If there is any other questions about WINS, then consider marking response as appropriate.

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• What is my type of incoming mail server and outgoing mail server name?

  Original title: e-mail servers

  I am trying to configure my windows email account. I use windows live as an e-mail provider. What is my type of incoming mail server and outgoing mail server name?

  Hello

  I suggest you for the link and check if that helps:

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

• DNS server and mail cross-site fell down.

  After restarting the Windows Server2008, the DNS server and mail cross-site not may start automatically. So I want to start these two are manual. There is no information in the log file or no code error on this issue. How can I solve this problem? Anyone knowing the solution please answer me. Waiting for your valuable suggestions.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Repost in the above Forums Windows Server 2008.

  These are the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Image taken from server and display on the screen

  Hello Sir

  I'm new to the development of Blackberry, I use a webservie that returns the image in . Its a Web service written in DotNet Framework. I'm trying to convert bytes it so that I can conver bitmap and use it on the screen.

  I think I'm losing a date when the dat of conversion to Byte]

  connection_for_image image_connection = new connection_for_image();

  raw Byte [] = image_connection.get (URL);
  Dialog.Alert ("control returned 1 size =" + raw.length);
             
  try {}
                    
  Bitmap_image bitmap = new Bitmap (Bitmap.ROWWISE_MONOCHROME, 50, 50, gross);
                      
  Image BitmapField = new BitmapField (bitmap_image);
  Add (image);
                   
  } catch (Exception e) {}
  Dialog.Alert ("catch" + e.getMessage ());
  }

  After running the above code a few image is displayed in black and white, but even once, is not the image I am downloading from webservice.

  In the connection class that I'm parsing the data type in bytes using following code

  data Byte [] = null;

  I have String = d.MySplitName (content, "",")<>
  data = i.getBytes ();
  return data;

  Here, I'm a little frustrated because you don't seem to listen to what I tell you.

  "How to convert byte [] Base64Binary data.

  "Is there a way by which I can convert the base64Binary byte data.

  Please read carefully what I suggested that you make.  You should be able to determine the raw bytes that has your Web server.  The Web Service then converts it to text he sends you.  You should be able to convert it to bytes that were originally used.  You have enough information in this thread already do.  Please confirm this part of the treatment before you do anything else.

  "then use these data to display the byte [] in the bitmap file.

  That's where I think your problem is.  Look at the code I gave you in the last post.  But you will need to know the format of the raw bytes that are stored on your Web server and sent to you.  Then find a way to convert them into a Bitmap image on the device - method may depend on how the bytes are stored on your Web server.  It might be that the bytes that are sent to you are already in a Blackberry bitmap format, but I doubt it.

  So please make sure that you have correctly found the bytes of the raw image.  When this is correct, you know that your network stuff working.  Once you've done that, then you have to find a way to convert the bytes of the Bitmap image.

  If the byte [] is supported by JSR 172 is not relevant at this stage.

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• 2950 server and components NV

  Hello, newbe here

  I have a Dell PowerEdge 2950 I need to erase the three areas of NV Ram, I downloaded the declaration of volatility, and these are the sections:

  1. Server Firmware, built-in optional ROMB) memory

  Check the pages of Dell, I see a NVRAM_CLR jumper, remove this jumper, boot and who should do it?

  2 Server (Embedded) storage controller Cache, RAM memory volatile Battery Backed

  Check pages Dell, to clear the cache of the storage controller, remove the RAM controller chip and battery. Starting the server, CTRL-M to SCSI (3 PERC, PERC 4) controllers or CTRL-R to SATA/SAS controllers (PERC 5, new controllers and PERC 6) according to the installed controller, wait five minutes in the CTRL menu to enable the content of the purge cache, restart the controller BIOS. Dell recommends re-flashing and BIOS / Firmware in the server.

  3. memory video Server DDR SDRAM

  Can't find anything on this

  He is the current wording of the SOV web site, can someone confirm the steps to clear these 3 boxes of NV RAM?

  Thank you, Bruce

  1. the Firmware (built-in optional ROMB) memory server

  Details

  Size:

  NVRAM 32KB, 4MB Flash

  Type: [e.g. PROM Flash, EEPROM]:

  NVRAM, Flash

  Can programs user or operating system to write data on it during normal operation?

  NVRAM data can be changed during the

  normal operation

  Goal? [e.g. code for startup]

  The Firmware data & configuration of controller

  How are data entry in this memory?

  Loading flash memory requires a seller

  Loader and the firmware file provided

  program which is executed by starting at the top

  the system from a diskette or a based OS

  executable containing the

  the firmware file and the loader. System

  charge with arbitrary data in firmware

  memory would not work.

  How is this memory write protected?

  The flash memory chip is software write protected

  Remarks

  2 Server (Embedded) storage controller Memory Cache (if not present/applicable, N/A will appear under details)

  Details

  Size:

  256 MB

  Type: [e.g. PROM Flash, EEPROM]:

  Battery Backed volatile RAM

  Can programs user or operating system to write data on it during normal operation?

  Yes

  Goal? [e.g. code for startup]

  Caching of data

  How are data entry in this memory?

  Normal operation

  How is this memory write protected?

  NO.

  Remarks

  3. memory video server

  Details

  Size:

  16 MB

  Type: [e.g. PROM Flash, EEPROM]:

  DDR SDRAM

  Can programs user or operating system to write data on it during normal operation?

  Yes

  Goal? [e.g. code for startup]

  Graphics buffer

  How are data entry in this memory?

  Normal operation

  How is this memory write protected?

  NO.

  Remarks

  Why you "have to" clear all these? This is totally useless or is a sign of other issues.

  1. this I can see - it has valid uses. Set the jumper, CLR, and then start the system - you will see a message that the NVRAM jumper is installed. At this point, you can turn off the power, unplug and put the rider in its original location.

  2. Yes, there may be rare cases where you will need to do this, but only if the system has no BONES and even in this case, it is more likely due to bad memory RAID or battery cache emptying the cache is not cleared on subsequent reboots. On the latest controllers, you can do it from the BIOS OF THE controller.

  3. This is cleared on every reboot - there is NO valid reason for data to remain 'active' in the video RAM. If you're worried, put off the power, unplug, hold down the power button / stop for 10 seconds.

• How to deploy Push Notification plugin for PGB CLI 6.3.0 Server and Client?

  Hello friends, I want to deploy the plug-in can push notification app, compiled by PGB CLI 6.0. But suggest to many doubts after reading the documentation... example: how to get the ID register which is located on the client side in mobilies? or you do not need this ID? If anyone has a site with step a step to set up the server and the application, please post the link here... I'm full of doubts... Thank you very much.

  Here is a detailed tutorial of the push plugin.

  Here's how to set up your credentials when you use PhoneGap Build.

• ESXi installation process and storage CF

  Hi all

  It's been a while since I worked with the CF based storage so forgive me if this is a silly question!

  I remember at the time of ESX 3.5 when a host is created, it is strongly recommended that you unplug your HBA as the installer ESX 3.5 was inclined to wipe your FC LUNS during installation.

  Is this always the case? If I add a bright new ESX5.1 host in a cluster existing I have to disconnect from the connected FC SAN for the generation?

  Thank you

  Chris

  No, during the installation of ESXi, it scans all the storage controller and storage/LUN connected to the server. Setup ESXi offer screen user input to select the storage that you want to install ESXi and installation takes place on the selected disk.

  If you are using a scripted installation, make sure that mention you the right VMHBA device in the KS file and remove the firstdisk option. For even if the device driver of the CF charged first by ESXi, KS file controller resumes the VMHBA right for installation.