DNS server and mail cross-site fell down.
After restarting the Windows Server2008, the DNS server and mail cross-site not may start automatically. So I want to start these two are manual. There is no information in the log file or no code error on this issue. How can I solve this problem? Anyone knowing the solution please answer me. Waiting for your valuable suggestions.
http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx
Repost in the above Forums Windows Server 2008.
These are the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Is possible to create the WINS resource record in DNS server and how?
Is possible to create the WINS resource record in DNS server and how?
No resource record WINS I can create when it right click on and select "other new records".
If you were using abusive or foul language, insults, etc. He would get you banned from the forum.
If you have done any of these, then I suggest that you do the following:
If banned, ask reason why and offer him your defense
If not banned, then let them know the name of the person "you kicked off the forum" reports of ill-treatment. They will study.
If you haven't seen any action on your report, and suspect that the Forum is not being actively monitored, you can request action by clicking the Site feedback link at the bottom of any Forums page. -Taken from
Forums Help FAQ
http://social.technet.Microsoft.com/wiki/contents/articles/7359.forums-help-FAQ-en-us.aspx#197
We get off topic with this conversation and the COC States:
Keep the topics of conversation on track. ............
.......... Discussions can be blocked in the forum comments if necessary.
If there is any other questions about WINS, then consider marking response as appropriate.
-
NB200-h-13 - no response from the DNS server and gateway
Hello
I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAYThe connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.
Hi abk55,
What program you receive this error message?
Have you tried another browser, for example Firefox or Opera?I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
Also, try to disable the filtering of MAC addresses and use another encryption. -
Change the DNS server, but consider e-mail to Office 365
I now have a customer who wants his site softdanmark.dk moved and accommodated with catalyst for business as the new design I've done for the company by muse and previewed as: softdanmark.businesscatalyst.com.
I've already added the domain name to Business Catalyst and gave him the dns data, but he still wants the email (MX) belong to the TDC, where he has his Office 365.
Is it possible to only move the DNS server and keep the MX record at the old company?
Hope you can answer my question.
Hey there,
You do not change the NS records, all you need to do is point the web traffic, so yes, have your screenshot you just need to change the record and when you set up the site in British Colombia you say outside.
Registration information are:
-
Inside the PIX515 DNS server, but does not work :(
Inside the PIX515E DNS server,
I have configured on the pix:
access-list 100 permit udp any example of 1.1.1.1 (for the host) eq field
access list 100 permit tcp any example of 1.1.1.2 (for the host) eq www
static (Inside, Outside) 1.1.1.1 192.168.0.1...
static (Inside, Outside) 1.1.1.2 192.168.0.2...
100 outdoor access-group
on the DNS (192.168.0.1) server, I configured http://www.xxxx.com mapped to the point 1.1.1.2
ATER configed, everyting ok. The user on the internet can reach http://www.xxxx.com
But yesterday that he SUDDENLY NOT work: (((user can get the server www only via 1.1.1.2, DNS NO WORKED goal.
Who can help me?
If it worked, and nothing has changed on the PIX, so you have to look and see what's changed on your internal DNS server or the WWW server, or if your ISP has changed something on their external DNS server.
I'm also agree it could be a problem of zone transfer that perhaps you don't realize, because it looks like something might have expired, which when it comes to things DNS, is usually the area has expired and cannot be transferred again.
Try allowing port 53 TCP thru to your internal DNs server and see if that helps the situation. If so, then close your ACL down to only allow your servers select external DNS zone transfers.
In addition, say the syslog when you try to connect from the outside? I can't emphasise this point to everyone that reads this, if you have problems of connectivity through a PIX, always check the syslog, it will give you the fastest and the best source of information about what is happening.
-
Y at - it a secondary IPv4 DNS server and if so, where can I find it? I looked in the Networkcentre and he's not here.
Contact your ISP and ask them their DNS servers IP addresses. Ifyou only have one number plug than the secondary and see if the XboxIt takes and connect to the internet.If you have a second, or use208.67.222.222208.67.220.220OpenDNS or8.8.8.88.8.4.4Google public DNS"MaxWestr" wrote in message news: cb27a0dd-f4d2-4432-bb66-03ab0d576549...> For example, my Xbox reguires a secondary DNS and my brothers DS> needs too. -
The DNS server does not - wired - wireless is OK
Hi all
This problem has left speechless several other computer scientists, I thought I'd try this forum before making a complete reinstallation. Here's a challenge to test your intelligence.
Here's the situation:
Dell laptop (11 months - still under warranty) with Wi - Fi and ability. Originally supplied with Vista, but I installed Win7 in November. I tried to do the clean installation method, but do not know if I managed to 'clean' approach because I thought that my data may be wiped. He was not, he is still on the machine. But W7 seems to work very well, I added Slowey some software. I think I was able to communicate with a wired connection before on the machine, but now I can't be sure. The machine communicates wireless without problem. IE8 opens fine. If I connect the wire and cut the antenna or boot to the wire with antenna, the machine starts and works well, but does not connect using IE8. I get a message "the DNS server is not responding.
The machine can ping and ping just fine on the wire. A chat session with Dell yesterday (Citrix I think) succeeded in transferring to wire wireless when I turned off the antenna. In addition, the MS patch notification came through this morning, but I can't download the patches on the wire.
Here is what has been tried so far:
- Changed cables and ports in the router to check the status of these question: these are OK.
- PC directly connected to the router: same problem.
- Verified services running (Control Panel-Admin tools-Online Services online):
System event COM + (for WZC issues)
Computer browser
DHCP client
DNS client
Network connections
Network location awareness
Remote procedure call (RPC)
Server
TCP/IP Netbios support
Automatic configuration wireless (only XP wireless configurations)
Autoconfiguration WLAN (wireless Vista only configurations) service
Workstation - Verified IPv4 is defined in order to obtain the IP address automatically.
- Reset IE8. No change.
- Turned off the Windows Firewall.
- Tried to access internet using Chrome. No go.
- Wired NETWORK card uninstalled and reinstalled driver. Downloaded last at Dell, they pushed also later. No luck.
- Tried the Google Open DNS. No difference.
- ipconfig/flushdns
- TCP/IP stack repair (run as Administrator: start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.)
-Entries reset WINSOCK to default installation: netsh winsock reset catalog
-Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
-Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log - While in Safe Mode, disconnected wire: uninstalled the driver for the CARD. Started full W7: installed the latest driver.
- In Safe Mode, the stack TCP/IP repair as described above.
All to nothing does not. IE does not connect to the internet. Chrome is not connecting to the internet.
You people have any ideas what the devil is wrong with this machine? Can you offer any suggestions to try to get access wired for the functioning of the internet?
Thanks in advance!
Hello Stringout,
I said to reset the router because the router is the DNS server and assigns the IP address to all devices on the network. Now, since you get the error "DNS server is not responding. It may possible that this router is not able to assign the correct ip address to all computers.
You can also try to update the router with the latest firmware. Still, Microsoft!
-
Two vpnadmin vpngroup dns server addresses
Has anyone or does anyone know how to put two vpngroup vpnadmin addresses of dns on a PIX 515E Server? I'm trying to set up a second DNS server and without the command in the PIX my VPN clients cannot authenticate through the PIX on the second DNS server. I tried several times to put the command but he continues to remove the existing and to replace it with one that I try to put in. Any help would be appreciated.
Randy L Brown
Great to hear and thanks for the update.
Pls kindly marks the message as answered while others may learn from your post. Thank you.
-
Site drop-down list does not work - DW CC 2015.1
Someone knows how to fix DW so that the drop-down list of sites appears in the files Panel? When I click on the drop down menu, I see he's trying to do * something * but I don't have the drop-down list. I can work around it by going to the Site > Manage Sites, but I prefer to use the drop-down list. Any help is appreciated.
Thank you
Tim
I filed a bug to the engineering team to watch, referring to this thread and the other (site drop-down list on the files tab too short?).
-
console server and room of local connection
Hello
I'm wondering - is it possible to use the Console of the room to manage a room that is managed by the local connection Server utility? I would like to browse the nodes from the collection, etc.
Hello
Currently you can not do. RoomConsole only works with the rooms on our servers, while with localconnection, all the nodes and the nodes are not stored on the server and stored on-site.
Thank you
Hironmay Basu
-
* Original title: it just that chat site which gave me a HRT page cannot display so I click fix coinection problems and he gave me your dns server may be unvailiable
This is a chat site called babblesex problems, said Sunday and its been 5 days because I can't access the website but I can access to other sites just babblesex site and it still gives me this page cannot be displayed and your dns server can be unvaliable
This Web site indicates that babblesex is, in fact, down:
http://www.DownForEveryoneOrJustMe.com
http://www.DownForEveryoneOrJustMe.com/babblesex.com
Don
-
my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!
You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.
Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
Step 1
VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.
Step 2
When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.
There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.
Step 3
In the LaunchDaemons folder, there may be one or more files with the name of this form:
com Apple.something.plist
When something is a random string, without the letters, different in each case.
Note that the name consists of four words separated by dots. Typical examples are:
com Apple.builins.plist
com Apple.cereng.plist
com Apple.nysgar.plist
There may be one or more items with a name of the form:
com.something.plist
Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.
These names consist of three words separated by dots. Typical examples are:
com.semifasciaUpd.plist
com.ubuiling.plist
Sometimes there are items (usually not more than one) with the name of this form:
com.something .net - preferences.plist
This name consists of four words (the third hyphen) separated by periods. Typical example:
com.jangly .net - preferences.plist
Drag all items in the basket. You may be prompted for administrator login password.
Restart the computer and empty the trash.
Examples of legitimate files located in the same folder:
com.apple.FinalCutServer.fcsvr_ldsd.plist
com Apple.Installer.osmessagetracing.plist
com Apple.Qmaster.qmasterd.plist
com Apple.aelwriter.plist
com Apple.SERVERD.plist
com Tether.plist
The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.
Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.
If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.
If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.
Step 4
Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.
The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.
Step 5
The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.
Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.
Step 6
This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.
-
Domain name internal and external DNS Server 2003 are the same
Since coming to my site from internal to an external hosting provider, I can't navigate the site on my local network
I created the necessary www folder and addrd public IP address for the my Web site.
I have created a delegation for the DNS Zone and set it to my server for dns SOA me reported.
I've seen this configuration several times in other networks but I canoe understand this one.
C:\>ipconfig/all
Windows IP configuration
Name of the host...: EIS03
Suffix main Dns...: evolutionimpressions.com
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: evolutionimpressions.comEthernet connection to the Local network card:
The connection-specific DNS suffix. :
... Description: BCM5708C NetXtreme II GigE (NDIS Broadcom
VBD customer)
Physical address.... : 00-19-B9-BC-3D-1E
DHCP active...: No.
IP address...: 172.16.1.5
... Subnet mask: 255.255.0.0.
... Default gateway. : 172.16.1.177
DNS servers...: 172.16.1.5.C:\>ping www.evolutionimpressions.com
Ping www.evolutionimpressions.com [184.168.26.1] with 32 bytes of data:
Reply from 184.168.26.1: bytes = 32 time = 67ms TTL = 59
Reply from 184.168.26.1: bytes = 32 time = 66ms TTL = 59
Reply from 184.168.26.1: bytes = 32 time = 61ms TTL = 59
Reply from 184.168.26.1: bytes = 32 time = 89ms TTL = 59Ping statistics for 184.168.26.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 61ms, Maximum = 89ms, average = 70msC:\>nslookup
Default server: eis03.evolutionimpressions.com
Address: 172.16.1.5> www.evolutionimpressions.com
Server: eis03.evolutionimpressions.com
Address: 172.16.1.5Name: www.evolutionimpressions.com
Address: 184.168.26.1>
Hello
We provide no support for Windows Server 2003 here. You should repost your question in the Windows Server forums at http://social.technet.microsoft.com/Forums/en-us/category/windowsserver.
-
The DNS server does not respond when try connect a Web site
original title: dns server problem
m using computer dell laptop with windows xp.i usually to plug my my cell phone and use vodaphone since 2 days internet.since I m unable to access all sites Web on laptop.m get a msg105 error (dns server does not)... so I downloaded the public dns server on cell n transferred on laptop and changed my dns to google dns server server... It worked fine for one day and the next day I had the same problem of server dns - no responding.so I repeated al procedure again and then it started workin again... What is the problem with my dns server... do I have to download na dinstall public dns server every time I use my laptop via the cell phone internet. ?... Help, please...
Thank youIt should work with the server DNS of Vodaphone. Set the laptop to get its IP & DNS addresses automatically, then make sure that the DHCP Client service is set to automatic startup.
John
-
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network
My PC does not connect to the internet, a window opens and says DNS server does not respond.
Hello
Follow the steps in the article mentioned below and check if it solves the problem:
http://support.Microsoft.com/kb/314095Kind regards
Afzal Taher
Microsoft technical support engineer
Maybe you are looking for
-
What exactly is the difference between these options? I did some tests but am not 100% sure. Currently I guess extensions.update.enabled just looking for new versions of addons, but it does not install them while extensions.update.autoUpdateDefault i
-
I want to leave my old HDD (1 TB) and buy a little extra (maybe 256 GB) SSD, but I read that it is not indicated (apparently existing) slot that is apparently designed for a TV tuner?
-
1 channel number not valid in the 'ChnIntegrate(1,"THSP0000AVYP","THORAX_ANGLE")' command in the line call chnintegrate(1,KANALNAMEIST1_,"THORAX_ANGLE"). 2.ch (0): invalid index vector or matrix in the line call formulacalc ("ch ('head'): = ch (NOC (
-
Detect the value in the control chain
Morning all, A program of serial data I create, I must now write values to a device. The user will enter the appropriate values in a control to the string and press "write". Is it a kind of function / way that LabVIEW can automatically detect if ther
-
Hi all I first want to reverse the order of the string first e.g. the string is 9200 FDE7 I want to change it to E7FD 0092. further, I want to change this string of hexadecimal value to a decimal string...... I implemented them in my vi... .well the