Server failure?

Similar Questions

• The Apple ID server failure

  I can't connect to the App Store or my phone on the backup device. Able to backup on iTunes but the phone can not restore from iTunes. Says that it cannot connect to server Apple ID Impossible to reset the phone. Help, please

  Hello krosa290,

  Thank you for using communities Support from Apple!

  I understand that you are having difficulty to connect to the App Store and backup your iPhone using iCloud. We know that situations like this can be frustrating, but there are a few troubleshooting steps that I would recommend working through this situation.

  To begin the process of diagnosis, I suggest reading over and working through the steps in the following article.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  The Apple ID server failure. Apple support communities

  See you soon!

• Automatic VMotion on server failure

  I have 3 servers in a test environment, I would like to configure these auto vmotion on a hardware failure:

  example:

  Server1: 3VMs to host

  Server2: host 5VMs

  Server 3: host 2VMs

  If say Server1 failed I would Server2 and serveur3 to take in charge the VMS of Server1.

  This require the enterprise version? or the advanced version would be sufficient? I believe that to do this, you need the distributed switch, which would point to the version I need to be more firm. a person couldn't confirm this please?

  Also is it possible with HA? I guess this would be a requirement on all the ESX servers hosting the VMs HA.

  Or y at - it a script that can be run to check if a server is alive to tell the server vcentre and migrate to another ESX physical server failure?

  Thanks in advance.

  1. you need VMware HA rather vMotion for hardware failure a.k.a unplan shutdown

  2 VMware HA required correct vCenter license depend on your ESX talking

  3 VMware HA does not need dvSwitch at all and just classic switch

  4. Once configured VMware HA, vCenter & ESX itself will do everything for check you inclusive heartbeat

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Re: HP officejet pro 8600 N911n, scan to E-mail: server failure.

  Have had this printer for a couple of years and scan to send an email worked perfectly with Gmail accounts until a few weeks before, then just stopped.

  I tried multiple e-mail accounts with their appropriate smtp servers inculding gmail, yahoo, outlook and 2 areas of private messaging. I confirmed that smtp servers and settings I have for each of the accounts is correct by settign accounts to send email thunderbird and all send with smtp servers, so this is definitely a problem for which something has changed with the printer as it used to work great. The printer is currently running firmware CKP5CN1545AR that she claims is ongoing.

  Please indicate how to solve this problem I used for scanning to e-mail several times a week

  Thank you

  Keith

  Hello @kkron, hope you are well!
  
  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems when using e-mail scanning function. I would like to help.
  We will first try to assign a manual DNS server that seems to do the trick, most of the time. Follow the steps below:

  • First of all, make sure that the printer firmware is up-to-date. If you are unsure, go to http://hp.care/2e12HCp and install the firmware.
  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the box that says "Manual IP", then click "Propose an IP address manually" to give an IP address manually to your printer.
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)

  Now try to scan to e-mail / web services. If the problem persists, please go through http://hp.care/2e0ZCCy and make sure that all settings are correct. If necessary, try to create a new account by following the instructions.

  Let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• The Mirage server failure

  Anyone know how to get the mirage server started? I finally got Management Server, server of Mirage and the installed console.  However when I add my server in the console it starts to connect and then says server down.  I checked the services and the mirage Server service is running. I also got a temporary license of VMWare thinking that was the issue.

  According to the instructions on the guide

  Connect the Console to the Mirage system

  After installing the Mirage Management console, you can connect the console to the Mirage system.

  Procedure

  1	In the Mirage management console tree, click on VMware Mirage in the directory root, and then select system to add.
  2

  Type IP address or host name of the Mirage management server of the management server address text box, and then click on OK.

  The management console is connected to the system. A Mirage server node now appears in the console window.

  Once the console is connected, it indicates to the system from the server to the low status because one Mirage server is not yet installed. The server status to the top when a server is installed.

  Thought that the server has already been installed if don't know?

  There are only two roles

  Mirage mgmt Server

  Mirage Server

  Can meet the described it please.

  This account is used to run the services?

  Start the console with which account?

• Question about server failure and data migration store

  Hi guys,.

  I just KVM/QEMU on Ubuntu Server and CentOS using Ovirt area of expertise VMWare ESXi is an easy to fall into the domain but I have a question for Server (Host) / relationships of data store. At the moment I have 6 ESXi running on a Dell server and use the local storage in the data store. I am limited in storage in this way so I thought I'd do a NAS or SAN, cost dependant, to expand my storage levels but I'm not sure of some things, but this one being the most important. If I use the server as a host of stand-alone and everything stored on NAS or SAN, storage in case the server fails and needs to be replaced can I use a new server and in the case of new installation of ESXi and use the existing database as nothing has happened or is it possible?

  Thank you

  Yes, it will work. By default the virtual machines consist of a bunch of files stored in a folder, and as long as you use the same (or a newer version) version ESXi - i.e. a data store format supported - you will be able to access these files.

  André

• vCenter Server 5.5 cannot start after a server failure

  Hello

  After power outage my vCenter does not, when I check the ODBC connectivity that works very well and thanks to the Internet I can get all the menu but it does not show inventory or data.

  I use the physical server to vCenter. could you please help me on this.

  When I check services, vcenter server is not started and is in the automatic delay start, I tried to start, but it's getting error

  Hi, I had a solution, the file corrupted, entry proxy.xml appear with different IDS for the SDK entry in proxy.xml

• A vCenter Server failure recovery

  Hi all

  I'm relatively new to VMware and now find myself with a serious and perplexing problem.  We have a cluster of two ESXi hosts with approximately 20 mV for connections a DVS.  Recently, we noticed that the Server vCenter, who also works as a virtual machine has become inaccessible.  Using the VI Client I reached the host that the vCenter Server is running and found alive, but without a network connection.  Reviewing its network settings, I found that he was still the real network set up but it was not "connected".  I tried to check the 'connected', but would receive enigmatic "caused by 0" error message in the newspaper work.  Tried to restart the server vCenter Server, no change.  Tried to change the setting so that it is turned off, no change.  Finally, I made the tragic decision to remove the connection network altogether and try a new.  Although the deletion went beautifully, but as you can probably guess, I now can't add a network card!  In fact I can make any change for the network adapters from one of my virtual machines due, I guess, to the configuration of the DVS and that, even if they are fortunately pumping packages in and out through their 'data plan', the 'control plan' of the switch DVS is located somewhere in the bowels of the vCenter Server...

  My question is the best way to recover my vCenter Server without affecting my virtual machines.  Should I create a new server vCenter Server on a physical server and support clusters with its two hosts?  How this would affect my productions receive VMs? or y at - it an easier way?  What happens if, on the host where my vCenter VM is running, I had to remove one of the network adapters of the DVS back to the simple virtual switch - I was then able to use this network adapter to add to my vCenter Server and get it back up and communicates with the two hosts?

  As all my virtual machines are running without problem, I want to ensure I can retrieve my vCenter without negatively impacting on them or do something stupid (yet!).

  I am grateful for any light you can on this for me...

  see you soon,

  William

  Hello

  You can remove a NIC of the DVS and create a simple switch and change the virtual machine to configure to use this switch.

• Data on the server failure recovery

  Hi all
  
  The rule of thumb: each 1 GB JVM can store 350 MB of data of the real object, assumes that we have 8 GB of data on the consistency, according to the above rule:
  
  8192/350 = ~ 24 JMVs required = > 24 * 1.2 = 29 ~ GB
  
  Then we have at least 2 servers of 16G RAM.
  
  We plan to have 4 virtual machines Java as cache servers on each of the two servers 16 GB as it advocates cannot have more than 4 GB of heap for each node in the cluster.
  I wonder if one of the servers fails, nodes in 4 cluster residing on it go down. If primary and backup of certain data are distributed both within these 4 cluster nodes that descend, then the data is lost even the other server has sufficient capacity for full redundancy.
  
  Is this correct? If so, how to solve? Is smart enough to put main and in the various boxes, not just different node each time as possible consistency?

  Hi Henry,.

  Not consistency inherently tries to minimize the risk of data loss and automatically checks the backup copy of the data to be kept on a different machine when possible. There is no more adjustment required for it. The StatusHA is the status published by JMX metric of coherence and more details can be found here:

  http://docs.Oracle.com/CD/E18686_01/CoH.37/e18682/appendix_mbean.htm

  I hope this helps!

  See you soon,.
  NJ

• The Adobe server failure

  The Adobe server is down, to get the new Folio Builder:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5152

  Is there another place where I can get the update?

  Hi Aad,

  Sorry for the inconvenience. The Adobe.com team working on their infrastructure. Investigation tonight (Italian time) showed that a single server for adobe.com was causing problem. Visitors to adobe.com in Europe were mainly affected hereby. The webops team has diverted traffic and the components must be downloaded again. I try from the Netherlands and downloads work again for me.

  With sincere friendships.

  KlaasJan Tukker

  Adobe Systems

  (on behalf of dps and webops team)

• Server failure of the BSO starting in use port

  Hi ladies and gentlemen Oracle,.
  
  I am trying to install Oracle Service Bus on Weblogic 11 G (10.3.3.0) application server. I first created the weblogic domain, then later extended to also include the functionality of the OSB. Having extended the domain, I changed the nodemanager.properties by using the setNMProps.sh file then restarted the nodemanager.
  
  The osb_server1 is created successfully in the area of WL, but I can not start due to the following exception in the file osb_server1.out of servers:
  < osb_server1.out content >
  from weblogic with the Java version:
  : Error 202 transport: binding failed: address already in use
  ERROR: JDWP dt_socket Transport could not initialize, TRANSPORT_INIT (510)
  JDWP output error AGENT_ERROR_TRANSPORT_INIT (197): no transport initialized [.. /.. /.. / src/share/back/debugInit.c:690]
  ERROR parts ONLY in the native method: transport uninitialized JDWP, jvmtiError = AGENT_ERROR_TRANSPORT_INIT (197)
  /opt/Robin/domains/osbTest/bin/startWebLogic.sh: line 166: 10209 Aborted ${JAVA_HOME} / bin/java ${JAVA_VM} - version
  WLS starting with line:
  / opt/oracle/middleware/jdk160_18/bin/Java-client - Xdebug - Xnoagent - Xrunjdwp: transport = dt_socket, address = 8455, server = y, suspend = n - Djava.compiler = NONE-Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSiz
  e = 128 m - XX: MaxPermSize = 512m-Dweblogic.Name=osb_server1-Djava.security.policy=/opt/oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.system.BootIdentityFile=/opt/robin/domains/osbTest/s
  ervers/osb_server1/data/nodemanager/boot.properties-Dweblogic.nodemanager.ServiceEnabled=true-Dweblogic.Security.SSL.ignoreHostnameVerification=false-Dweblogic.ReverseDNSAllowed=false - Xverify: none - da: or
  g.Apache.XMLBeans... - ea - da: com.bea-da: Javelin--da: weblogic... -... ea:com.bea.wli - ea:com.bea.broker... - ea:com.bea.sbconsole...-Dplatform.home=/opt/oracle/Middleware/wlserver_10.3-Dwls.home=/opt
  /Oracle/middleware/wlserver_10.3/Server-Dweblogic.home=/opt/Oracle/middleware/wlserver_10.3/Server-Ddomain.home=/opt/Robin/domains/osbTest-Dcommon.components.home=/opt/Oracle/middleware/oracle_common - dj
  RF.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Djrockit.optfile=/opt/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.do
  main.config.dir=/opt/Robin/Domains/osbTest/config/fmwconfig-Doracle.server.config.dir=/opt/robin/domains/osbTest/config/fmwconfig/servers/osb_server1-Doracle.security.jps.config=/opt/robin/domains/osbTest/
  config/fmwconfig/JPS-config.xml-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Digf.arisidbeans.carmlloc=/opt/robin/domains/osbTest/config/fmwconfig/carml-Digf.arisidstack.home=/opt/robin/domains/o
  sbTest/config/fmwconfig/arisidprovider-Dweblogic.alternateTypesDirectory=/opt/oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/oracle/Middleware/oracle_common/modules/oracle.oamprovider_11
  . 1.1 - Dweblogic.jdbc.remoteEnabled = false - Dweblogic.management.discover = false - Dweblogic.management.server = http://10.1.8.111: 14000 - Dwlw.iterativeDev = - Dwlw.testConsole = - Dwlw.logErrorsToConsole = - Dweblog
  ic.ext.dirs=/opt/oracle/Middleware/patch_wls1033/profiles/default/sysext_manifest_classpath:/opt/oracle/Middleware/patch_oepe1033/profiles/default/sysext_manifest_classpath:/opt/oracle/Middleware/patch_ocp35
  3/profiles/default/sysext_manifest_classpath weblogic. Server
  : Error 202 transport: binding failed: address already in use
  < content end osb_server1.out >
  I checked several threads of forum for this exception and learned from them that the normal cause is the double use of the debug port 8453. I have changed this port in the setDomainEnv.sh file as well as in the nit-info/startscript.xml and init-info/startscript - unsub.xml. Stopped all components of weblogic (nodemanager and AdminServer) then restarted everything again. Unfortunately, this solution does not work as the exception above keeps appearing even when using different ports.
  
  Did someone saw the dt_socket Transport JDWP exception when they installed the functionality of the osb and knows how to solve this problem?
  
  Thank you in advance,
  René

  -Xrunjdwp: transport = dt_socket, address = 8455

  get rid of it to the starting line of the managed server and see if it makes a difference.

  Pete

• Is the only soultion of DCOM nt server failure, to reinstall the OS?

  Ive had the same problem as everyone else, started 2 days ago, and our COMPUTER technician at work is at a loss.

  Hi hckydad,

  I suggest you return the debates in the link below that may help you resolve the issue.
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/b576b5a5-BB10-4538-a73f-bfc3daf593d6

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• HP eprint server offline? Connection error - 1

  I installed a new photosmart 5520 Sunday and the man was cool.   Worked like a dream with the help of ePrint and Google cloud server.  I bought it to support a Samsung Chromebook's Google in need of a printer ready cloud.   Yesterday morning the print jobs are starting to have stuck in the print queue and not through.   The hpeprint site showd the printer as "offline" yet he was clearly on the internet as evidenced by the various reports, that I could print.    So... we assume the best action to remove the printer on the site of HP and re - register again.

  After deleting the printer, I need to generate a new confirmation code to add the printer back again... followed the instructions to the letter, pressing the ePrint button to generate a new code to enter... nothing other than error messages.

  A phone call last night at the HP eprint for assistance was immediately answered by a real person who says HP eprint servers had been up and down all day... and were offline.   Until they were still online, my printer won't talk to them... and no code has been sent.

  Almost a day later I'm still not able to connect to the HP eprint servers.    Nothing in the news about the hacks on HP.  Nothing on this HP website or the forum about one or the other major global eprint server failure.   Odd.

  Anyone else having a problem here?    Are the HP servers always down?   What can be done to re-establish the connection between the servers and my printer - button by pressing this darn eprint generates only a spinning wheel, followed by an error message-1 connection.

  I found the problem... a few days after the condition appeared all of a sudden, it went just as suddenly.   I was on the phone with HP when the printer is back to life, so I learned why.    Seems HP rolled a big block of customers from one server to a new server... and I was in the limbo of roller for the HP Server.
  
  I suggested that he could have a good customer service go to... maybe... Send a print job to everyone telling them ongoing disruption and that it was inevitable, and every effort was being made to minimize downtime.   Don't panic.  Do not reset your settings of the printer.  Don't spend hours searching for the cause of the problem.  Don't box your new printer and taking it back to the store.
  
  But what the hell... they have just rolled with it and never said boo to anyone.   No email.  No work print that suddenly appears.  Not even a service disruption alerts to HP service Web site.     Really dropped this ball HP.    I have the printer and the concept of love, but not to repeat this mistake without talking to your installed user base.

  Waxhaw.

• PowerVault NX3100 drive failure

  Hello

  We have a problem of drive on a PowerVault NX3100 server failure.

  SAS

  HARD DRIVE

  136,12 GB

  Dell (TM)

  ST9146803SS

  FS62

  6SD17KY7

  We need an offer for a spare part.

  Best regards

  Buongiorno, the sto contattando via e-mail

• Message 'failed execution of the server.

  I was successfully download of how-to video clips; from today when I try to open a video uploaded, I receive the message "Server execution failed".  Where this indicates my problem is from?

  Hello

  Welcome to the Microsoft Community Forum.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  1. what application you use to play this video?

  2. What is the full error message or code, when you say, "running the server failure?

  3 are you facing this problem with videos?

  4. do you have this problem start recently? If so, remember to make changes to the system before this problem?

  In the meantime, I suggest that you try to follow these steps and check if it helps:

  1. click on start and in the search bar type cmd.exe.

  2. right click on cmd.exe and click Run as administrator.

  3. in the command prompt, type the following command:

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  4. press enter and restart the computer.

  Hope this information is useful.

  Please respond with the requested information, in order to help you solve the problem.

  Thank you