Server failure of the BSO starting in use port

Similar Questions

• CiscoSecure ACS 4.2 could not start due to failure of the services start bit

  There are few services that wasn't able to restart, they are as follows:-

  (1) CSAuth

  Error:-"Windows could not start the csauth on local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1060 "specific error code

  (2) CSTacacs

  Error:-"Windows failed to start the cstacacs on the local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1066 "specific error code

  (3) CSRadius = start

  the rest of services like CSAdmin, CSDbSync, case were lit.

  Also I am not able to take the acs system backup of the System Configuration-> ACS Backup and pressing backup now. It shows the msg of error as

  : - CSAuth service must be running to start the backup

  I was referring to the snapshots of the OS itself, but I guess you checked now.

  Do not forget that the case works so you should see logs for services that do not work. Learn about the \CSAuth\logs folder for logs CSAuth and other records for other services that do not work.

  There is a located here very detailed troubleshooting guide:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  This guide should help you solve the question if there is no other software on the server to cause trouble. One thing it says who can apply to you is to ensure that the Windows Firewall as connection sharing Internet is not ongoing.

  Because I am familiar with your server, I think you should do the quick test below for if sure there are not taken, which may be crashing the authentication services that you mentioned. In the command line, type "netstat - ano | Findstr Listening-i"and see if or not he has taken open your ports Ganymede + and radius. He will probably return false, but it's worth a check.

  Worst case scenario, you may be able to use CSUtil to back up the database (I'm fairly certain you can back up services that work), install the ACS on a new Windows 2003 server, and then restore. You can use CSUtil to many types of exports and operations as well.

  If you manage to deal with the problem or not, you should speak with the person who is responsible for making backups of your servers and make sure that something like this was coming once again that you can have a quick fix during a maintenance window.

• Microsoft visionC ++ debug library Runtime check failure #3 the variable 'siNumberOfTopics' is used without be defined.

  I get this error when I try to print and impossible to print.  I've uninstalled and reinstalled the drivers twice now.  I'm so frustrated right now.  Need advice.

  Hi HeatherTuttle,

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Download and install the latest visual c ++ runtime.

  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Method 2: Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-a-runtime-error

• How to force the screen sharing to use Ethernet 2 port?

  Hello

  I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

  When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

  Is there a way to force the screen sharing to use Port Ethernet 2?

  It would be useful:

  NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v

• I want to get the best on my router (Port Forward questions)

  I use the WRT54G2 router and the wmp54G. I'm trying to get games like America's army and Team Fortress 2 to work properly. I've assigned my static Ip pc using the guide portforward. I forwarded the necessary ports.

  I can't connect to my account on the U.S. military, and I can not connect to servers on Team Fortress 2. I tried to disable my anti-virus and firewall but still no luck. I'm doing it on the pc with the wireless connection.

  Any suggestions?

  I also have another question: when transmitting ports or using DMZ, what IP address I send? The pc connected directly to the router or the pc which is using ports (one wireless)?

  BTW, MY ISP is Comcast

  In most cases, you can use the DNS proxy server that is built into the router at 192.168.1.1 (address by default), but in your case would be in 192.168.2.1

  It is preferable to use the DNS proxy server.  The router keeps track of the actual Internet DNS server addresses from your ISP and transfers data to the appropriate DNS server.

  If the DNS server of the router proxy does not work, then enter your true Internet DNS server address in your computer.

  In addition, I see that you use the et.102 adresses.101 in your computers.  Your range of DHCP servers by default est.100 thru.149, so unless you have changed it, you use illegal LAN IP fixed addresses in your computer.  This could be the cause of your problems.  Note that all fixed LAN IP addresses should be outside your range of DHCP server.

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• Error 1067 by starting the VMware Virtual Center Server service after the upgrade to VCenter 4.1

  I've started with VCenter 4.0 update online success in 4.1u1

  but now I can not start the service with Error 1067 by starting the VMware Virtual Center Server service.

  I did the upgrade online in VCenter 4.1u1 with this iso file VMware-VIMSetup-all - 4.1.0 - 345042.iso and now the entire production is declining.

  I use SQL Server 2005 32-bit as the database.

  Any kind of help would be greatly appreciated please?

  I guess it's all true by:

  http://KB.VMware.com/kb/1022104

  http://www.VMware.com/support/vSphere4/doc/vsp_vc41_u1_rel_notes.html

  And what exactly is a failure, is the DB on a different server or living on the vCenter Server?

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• The Apple ID server failure

  I can't connect to the App Store or my phone on the backup device. Able to backup on iTunes but the phone can not restore from iTunes. Says that it cannot connect to server Apple ID Impossible to reset the phone. Help, please

  Hello krosa290,

  Thank you for using communities Support from Apple!

  I understand that you are having difficulty to connect to the App Store and backup your iPhone using iCloud. We know that situations like this can be frustrating, but there are a few troubleshooting steps that I would recommend working through this situation.

  To begin the process of diagnosis, I suggest reading over and working through the steps in the following article.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  The Apple ID server failure. Apple support communities

  See you soon!

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• The activation server determined that the specified product key cannot be used.

  (windows 7 Professional) product key, I get from MSDN, through my college
  the key has been used first in my office and I've activated, it
  later, I formatted my desktop computer and install w7 in my laptop with the above product key
  so I find the product key will be impossible to activate windows

  Here are the details of the error:
  ---------------------------
  Error details
  ---------------------------
  The following information was found for this error:

  Code:

  0xC004C008

  Description:

  The activation server determined that the specified product key cannot be used.

  ---------------------------
  Ok
  ---------------------------

  pls help >
  THX in advance

  Hello

  Since you have already activated this product key, the server displays the key as being in use. Simply call the Activation Center and activate manually settle.

  1. press the Windows Logo key + R. This will bring up the run dialog box.

  2. in the Open: box, type slui 4 and press OK. This starts the manual activation wizard.

  3 select your country from the drop down and click Next.

  4. the wizard displays a toll-free telephone number. Leave the wizard open on the computer and call this phone number.

  You will receive a few saved options. Select the option to speak to a representative.

  The representative will manually activate this system for you.

  Let us know if you mhave more problems

  Ronnie Vernon MVP

• Start button on the taskbar, while opening with the mouse, but works using the touch screen does not

  Windows icon on the taskbar does not bring up start page using the mouse, but will Touch. Clickable after the restart, but only for a couple of times?

  Hello

  Please contact Microsoft Community. I understand that start button on the taskbar does not not at the opening with the mouse, it works but when touch use. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem occurs when you use another mouse?
  2. What is the number and the model of the computer and the mouse?
  3. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:

  1. Missing updates of Windows and the device driver updates.
  2. Conflict between third-party applications.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:

  If the problem does not occur when you use another mouse, I suggest you to download and install all Windows Update available including optional updates. You can also install the last mouse driver\Software from mouse manufacturer website and check if it helps.

  Method 2:
  If the problem occurs when you use a different mouse, I suggest to start the computer using safe mode and check if the problem occurs or not. If this isn't the case, I suggest you put the computer in a clean boot state and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Step 2:
  If the issue happen not in Mode without failure, perform a clean boot and check. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:

  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• How to identify the server name of the report and start reporting on GR 11, 2 server to call reports forms

  Developer Environment:

  Windows 7 64 BIT

  Oracle Fusion Middleware 11.1.2.2

  WLS 10.3.6

  All reports run correctly from the report generator.

  I tried the following report server name, and do not know, I use a wrong name of report server, if the server not property began or if this is a problem in configuration of the environment.

  Name of report server:

  Rep_computer_name: Rep_xxxT5600.

  (1) as a result URL will return the error:

  http://localhost:7001 / reports/rwservlet/showenv? Server = Rep_xxxT5600

  Returns the following error message:

  REP-51002: link to rep_xxxt5600 for report server has failed.

  (2) from the report server in a DOS window

  C:\Oracle\Middleware\asinst_1\config > rwserver Server = Rep_xxxt5600

  Returns the following error:

  REP - 50125:java.lang.NullPointerExcpetion

  Any help or advice would be very happy.

  I apologize in advance - I posted this in the forum reports, but don't get all the answers.  This information is needed for call forms reports, so I'm confident that someone from the Forum forms can help guide me.

  Thanks yo in advance.

  Mika

  I was able to solve the problem by the following text:

  1. Implement the steps found in how you create and start up A Standalone Server reports in 11g R1 & R2 (Doc ID 961174.1)
  2. To solve the REP-52262: output diagnostic is disabled.

  Change $DOMAIN_HOME/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.2/configuration/rwservlet.properties

  
  

  #FROM

  Yes

  #TO

  Yes

  L2

• FRM-92101: there was a failure in the Forms Server during startup

  Dear all,

  I cloned Oracle APPS R12 on RHEL6 and cloning is complete, but all by opening the form, we receive some error like below.

  «FRM-92101: there was a failure in the Forms Server when booting.» This could happen because of invalid Configuration

  Please look in the log file of the web server for more details. "

  
  

  I cut the RPM using

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID

  761566.1] metalink document and especially

  OpenMotif *.

  xorg-x 11-libs-compat * RPM

  
  

  All the rpm is installed and applied the os library patch 6078836 also. But no luck got still the same error.

  Concerning

  Kumar V

  Dear team,

  Problem solved.

  Solution:

  Applied libxcb - 1.8.1 - 1.el6.i686 rpm and restarted the application services.

  We now able to open the form without problem.

  Thank you

  Kumar