Automatic VMotion on server failure

Similar Questions

• Automatic VMotion if the failure of the network Mgmt

  It's probably crazy, but the only stupid questions are the ones that we don't ask, right? We have guests esxi 5.5 with vswitches separated for iscsi, management and vmotion san connections. Each currently has 2 natachasery each. We also have vCenter, HA and DRS.

  We are before pulling a Teddy of the vswitch mgmt and move it to a new vswitch. We are trying to determine if network mgmt on the single host failure, we could live with a brief downtime until you get vmotioned to other hosts. What would be really useful, it's vmotion could be triggered automatically in case of failure of a network of mgmt. Is this possible?

  Sorry, seems that I misunderstood your question. If you plan to have two vSwitches with one uplink, each one for management and one for virtual machines!

  Unfortunately neither DRS nor HA will kick in where the VM network breaks down. You need to make the migration manually or scripted.

  André

• HA automatic vmotion does not work well

  If I put a host of a cluster in maintenance mode, it is not automatically vmotions to the server on the other hosts in the cluster. It exports only all virtual machines in the parent of the cluster and not preserve investment here in my tree of resource pool. Why?

  (Fully automatic) DRS with Hectares activation should solve this problem.

  -A

• starts automatically after a power failure

  Hello, I use a Macbook pro 8.1 13 "(A1278)"

  I need 'start automatically after a power failure' work as below

  

  Bun, my macbook can't activate this function. I can't find the same box. Check the screenshot below.

  

  I'm looking for the options "start automatically after a power failure".

  This feature appears to be available only for the Mac desktop.

• X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  Hello
  Basically, Yes to your question.

  For more details;

  IMM2 Web GUI access via browser and see environmental specifications tab in the server properties menu.
  There are two types of threshold, "Higher criticism" and "upper Fatal".

  If goes on "Higher criticism", then a soft stop will be initiated, where the next depends on your operating system of his behavior causing shutdown graceful or not progressive.
  If more higher jumps "Upper Fatal", then a hard stop will be engaged, which is not a normal shutdown of the typical operating system perspective.

  Kind regards

• The Apple ID server failure

  I can't connect to the App Store or my phone on the backup device. Able to backup on iTunes but the phone can not restore from iTunes. Says that it cannot connect to server Apple ID Impossible to reset the phone. Help, please

  Hello krosa290,

  Thank you for using communities Support from Apple!

  I understand that you are having difficulty to connect to the App Store and backup your iPhone using iCloud. We know that situations like this can be frustrating, but there are a few troubleshooting steps that I would recommend working through this situation.

  To begin the process of diagnosis, I suggest reading over and working through the steps in the following article.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  The Apple ID server failure. Apple support communities

  See you soon!

• How to set up the database restarts automatically when the server starts?

  Hello
  
  What is involved if I configure Oracle database starts automatically when the server is started/restarted?
  
  I guess that change the following entry in/etc/oratab
  

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:N

  TO

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:Y

  is not sufficient - there is more than that. But what is it?
  
  We can also configure the listener to automatically re / start?
  
  I guess that everything what is the solution, it will also apply to Oracle 11 GR 2 databases/ASM - right?
  
  The platform is Redhat Linux 64 bit (version 4.7 & v5.9).
  
  Thanks in advance!
  
  Best regards

  Hello

  Below is one example of autostart services database and the listener.

  1 > make/etc/oratab file entry Y as:
  ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

  2 > create a file called "/ etc/rc.d/init.d/oracle" as root, containing the following.
  --------------------------------------
  #! / bin/sh
  # chkconfig: 345 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Define ORA_HOME as equivalent to the $ORACLE_HOME
  # from which you want to run dbstart and dbshut;
  #
  # Define ORA_OWNER to the userid of the owner of the
  # Oracle in ORA_HOME server.

  ORA_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  ORA_OWNER = oracle

  If [! f $ORA_HOME/bin/dbstart]
  then
  echo "Oracle startup: cannot start.
  output
  FI

  case '$1' in
  'Start')
  # Run Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
  known - $ORA_OWNER - c $ORA_HOME/bin/dbstart
  ;;
  'stop')
  # Stop the Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c $ORA_HOME/bin/dbshut
  known - $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
  ;;
  ESAC
  -------------------------------------------------

  3 > use the chmod command to set privileges to 755.
  chmod 755 /etc/rc.d/init.d/oracle

  4 > associate the appropriate oracle service run levels and set it to auto-start by using the following command.
  chkconfig--level 345 oracle on

  Note:-back, I've done this for a long time... Please check the dbstart use pfile or spfile to start the database instance.
  Thank you

• The value of VM to restart automatically after a power failure

  Hello world

  I'm under vSphere Client 4.1.0 and VMware ESXi 4.1.0. I'm having a problem to find my vSphere client where to change the VM to restart automatically after a power failure. When we have a failure someone must manually start the virtual machine. I want that it automatically starts up on its own. Where can I change this to? I looked around the client with little success...

  Thank you for your time and help

  on the ESXi host go to the tab Configuration - setting Virtual Machine power - properties (top right of the customer)

• Automatic failover of server, not exactly by using CSS to load balancing?

  Hello

  I investigated the use of the unique CSS11501 box to meet a specific requirement of customers for what follows.

  A sticky connection to a Winframe Cluster(client side) to a backend via a VIP web servers. The reason for the sticky connection with the main server is that there are additional servers providing services to two servers independent backend web service VIP.

  Most traffic on the client side will come to a limited set of ip addresses (or maybe even one) that represents the many winframe unique sessions i.e.unique browser sessions. I think that this can be achieved by using Cookies. Is this OK and there at - it another way to do this?

  In the background that VIP must use only the web server main, even though he is active/available, but have the ability to switch automatically to a second server, if one breaks down.

  I believe that it is possible to use a script or the HTTP protocol in the service keepalive. My question is what balancing method can be used to achieve this type of active / standby (HSRP) as a feature on the CCS for Services (Servers) attached?

  Thanks in advance,

  Regan

  Regan,

  1 cookie should be used to stickyness if ip addresses is not allowed.

  2 check the functionality of the backend I'm sorry.

  This allows you to configure the normal servers [or one] who will receive all traffic and if they are all declining, the sorry server will be used.

  So in your case, the backup server will be defined as server sorry.

  The command you need is primary sorryserver under the definition of the content rule.

  Kind regards

  Gilles.

• How can I prevent dreamweaver to upload automatically on the server?

  I don't know exactly when it started (perhaps 7 or 8 months), but I can't seem to get Dreamweaver to stop the download automatically.  I have disabled synchronization and impossible to find other settings that would nominate automatically download files.

  Often, when I type in the code window opens asking if I want to register the first before you download... It's so FRUSTRATING!  No, I don't want to download my code when I'm in mid-way through a line!  Almost everytime I change the windows focus to another program I get the prompt to save before you download.  I am often to halfway through a line of coding, then go to refer to something that for have it expire and download anyway, rendering of the page I work on broken on my test (or in my case, direct) server.

  I want to just as Dreamweaver to work as before: no automatic downloads, I just want to download ONLY when I put, not as long as I type, not while I step away for a while, not when I change the update...

  Anyone know how I can stop this thing to decide to randomly download my code without reason?

  Set up a local test server (it's pretty simple using XAMPP or MAMP) and then to keep your sites inside, DW pushes files in this situation: setting up a local testing server in Dreamweaver CS5 | Adobe Developer Connection

  If you want to revert to an earlier version, it is quite simple. You can actually have CS6 Cloud and CC CC2014.x CC 2015.x all installed on the same computer at the same time, under a single subscription license. They just does not work at the same time. Here's how...

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• vMotion is a failure for virtual machines

  I'm trying to migrate virtual machines to one ESXi to another in the same cluster, it fails in the first stage. Storage and networking are shared and other same cluster different host machines have been migrated successfully. One could suggest?

  Are you a specific error when migrating?

  It's a failure at the end of specific percentage?

  Have you checked reverse migration between different host and no host work?

  Check if the nucleus of vMotion port is accessible from both ESXi hosts.

  If vMotion IP is not the ping requests, check if the IP configuration is correctly performed according to the standard.

  If the IP configuration is done correctly, try unchecking and rechecking vMotion core port of two hosts, it should work.

  Also check that vMotion does not work on dVS and Standard with different IP configuration.

• Home put in service of a DRS cluster active mode NOT to trigger and automatic Vmotion

  I'm under 5.5 U2

  I have a cluster with active and defined DRS fully automated, but when I select the host for the maintenance mode of the VM NOT vmotion to another host in the cluster automatically. I have to vmotion manually each virtual machine to a host selected manually. There are a few VM with DRS off on them because they ONLY work on the host, they are assigned to (replication of virtual computer), but all the other VMS are defined 'by default (automated)'. Would it because I only have two of the host in the cluster?

  

  Try this.

  Hope it will solve your problem.

  http://www.vmwareminds.com/troubleshooting-maintenance-mode-process-get-stuck-at-2/

• vCenter Server 5.5 cannot start after a server failure

  Hello

  After power outage my vCenter does not, when I check the ODBC connectivity that works very well and thanks to the Internet I can get all the menu but it does not show inventory or data.

  I use the physical server to vCenter. could you please help me on this.

  When I check services, vcenter server is not started and is in the automatic delay start, I tried to start, but it's getting error

  Hi, I had a solution, the file corrupted, entry proxy.xml appear with different IDS for the SDK entry in proxy.xml

• vCenter service starts do not automatically after the server restarts

  Hello

  We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.

  VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.

  2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser

  2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index

  2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094

  2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448

  2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms

  2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451

  2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045

  2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007

  2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251

  2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646

  2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019

  2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now

  Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.

  Please advise on this.

  Thanks in advance!

  Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

  hope it will settle your error. same problem I faced and fixed in this way.

  Thank you.

• Data on the server failure recovery

  Hi all
  
  The rule of thumb: each 1 GB JVM can store 350 MB of data of the real object, assumes that we have 8 GB of data on the consistency, according to the above rule:
  
  8192/350 = ~ 24 JMVs required = > 24 * 1.2 = 29 ~ GB
  
  Then we have at least 2 servers of 16G RAM.
  
  We plan to have 4 virtual machines Java as cache servers on each of the two servers 16 GB as it advocates cannot have more than 4 GB of heap for each node in the cluster.
  I wonder if one of the servers fails, nodes in 4 cluster residing on it go down. If primary and backup of certain data are distributed both within these 4 cluster nodes that descend, then the data is lost even the other server has sufficient capacity for full redundancy.
  
  Is this correct? If so, how to solve? Is smart enough to put main and in the various boxes, not just different node each time as possible consistency?

  Hi Henry,.

  Not consistency inherently tries to minimize the risk of data loss and automatically checks the backup copy of the data to be kept on a different machine when possible. There is no more adjustment required for it. The StatusHA is the status published by JMX metric of coherence and more details can be found here:

  http://docs.Oracle.com/CD/E18686_01/CoH.37/e18682/appendix_mbean.htm

  I hope this helps!

  See you soon,.
  NJ