Server HTTP Oracle11g
Does anyone know if the Oracle HTTP server to oracle removed 11 GR 2 database software?I don't see any apache or mod_plsql under the ORACLE_HOME directory.
The HTTP server has been certified with the license of if used database on the same machine, so I would use it.
I see another middleware product named web layer which also includes, but asked whether this product HTTP Server installation is licenses with RDBMS.
Published by: Mark on January 31, 2013 20:13
Duplication?
See
Installation of apex with Oracle 11.2.0.3
Tags: Database
Similar Questions
-
No the ciscoworks server http response
Hi all
We use a stand-alone server of Ciscoworks lms 3.0.1.
In ciscoworks Portal attend, when we click on the Configuration of the server, we get error
CWA14: No the ciscoworks Server HTTP response.
Either: 1. the server may be down. OR2.the Protocol, port number or the user maybe credentials wrong.
1 check the connection to the server.
2. check the credentials.
3. restart the daemon manager.
We can view the setting of the server, and we have not changed credentials or stop all services. Everything works fine.
Why this error is coming and what should be done to clean it up.
Thank you
with respect,
Ashraf
It is most likely a problem with your user identity System credentials, then. Go to common Services > server > Security > identity system configuration and re - enter user credentials valid for a user who has full access to all of the LMS. Then see if CWA works.
-
My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.
Are what the hell you referring in Windows 8?
Submit all Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Make a name virtual server HTTPS only
I am using BCI 11.1.7 and using the Web Cache, OSH, and WebLogic. I have several servers to virtual name defined in OSH. I want to implement that one of them is only connected via HTTPS and HTTP requests are redirected to the HTTPS version. I tried the obvious thing, using mod_rewrite in the configuration of the virtual server in OSH to redirect the HTTP requests:
RewriteCond %{HTTPS} off
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [R,L]
Of course since all the traffic of the OHS Web Cache using HTTP this simply causes an endless loop of redirects.
So I wonder if there is a header, or something sent by Web Cache, I can use to tell if the original application used HTTPS. Otherwise if there is a way to configure this at the level of the Web Cache, which would work as well. Otherwise I think I'll finish with a certain configuration of Frankenstein that will be featured on http://www.thedailywtf.com in 2018
I was dumping all the headers using JSP and found out the header (undocumented?) HTTPS-SSL defined by the WebCache is 'off' or 'on '. So I used:
RewriteCond %{HTTP:SSL-Https} !on
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [R,L] -
Server HTTP Oracle Hyperion 11.1.2.2 installation
Hi all
We intend to install the Version Hyperion 11.1.2.2 in the middle of the distribution. (windows 2008 64 bit, SQL Server)
In the installation we have options like
1 embedded weblogic
2 oracle HTTP Server
3 IIS
In this regard, which is better for the web server. ?
We plan to install Essbase, Planning, EPMA, FDM, Reporting, smartview, ODI in 3 servers.
so, please suggest that components that are able to deploy in each machine between different servers?
Thank you
MadyPersonally, I feel THAT OSH is overall the best and the most common http server in the list to be deployed if everyone has there own opinions and reasons for choosing other options.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Advice on the implementation of a server HTTP for APEX
Hi Experts,
I am very busy to configure an application in the APEX, and we are about to deploy it on our production servers.
Side database is fine, but I have a few questions on the HTTP server.
(I just trained as an engineer, working with databases for a few years but the world of HTTP is fairly new for me).
-What is the best option for the HTTP Server?
I tested autonomous apex_listener now and under Server GlassFish.
When we move to production, I'm looking at:
-max 10 concurrent users
-windows 2003-based Web server
-APEX 4.1
-oracle 10.2
-Once we have installed the APEX on the database server, we keep the apex available files, or can I just remove?
(I know I need the file apex\images on the Web server).Hi JP,
-What is the best option for the HTTP Server?
I tested autonomous apex_listener now and under Server GlassFish.The stand-alone mode is intended to be used for development/testing purposes only. If you are considering a production deployment, use a server JEE 'full share '. GlassFish is an option. If it is the one that you want depends on your production and your previous experiences with JEE servers scenario. You will get a complete list of all the servers JEE with support in the section of the Setup Guide requirements.
-Once we have installed the APEX on the database server, we keep the apex available files, or can I just remove?
(I know I need the file apex\images on the Web server).You can simply delete the installation package, but you might want to keep some files for the tasks of maintenance and development, for example apxchpwd.sql in order to reset the password for the internal ADMIN of the APEX and the content apex\utilities if you need to reset the image prefix or use APEX based on java to export to export the line of command/script function (multiple) APEX applications.
-Udo
-
CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0
Dear Oracle gurus
Our platform:
ORACLE11G r2 RAC/GRID 11.2.0.1.0
ReadHat Enterprise Linux5.3 64-bit
RAC - 2 NŒUD
[root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
CRS-4534: can not communicate with the event Manager
RAC - 1 NŒUD
[root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
CRS-4533: Event Manager is online
RAC - 1 NŒUD
crsd.log
2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
RAC - 2 NŒUD
crsd.log
2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
Please help solve the problem.
Let me know if you required information.
Concerning
Hitesh Gondaliahitgon wrote:
We correctly the required permissions and ownership changes before we install the RAC.
But after restarting the server.Please find the required papers.
[root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1[root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1Concerning
Hitesh GondaliaHello
Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
After this test restart again and see the resultHope this helps
See you soon
-
Problem in the use of JSONDATAACCESS for parsing json getting as the server Http response.
Hey Hi,
I was tired this solution but get a problem. The problem is when I am trying to build my project it gives an error stating that ' expected ';' before ' ja ' when I declare JsonDataAccess.
Here is my code snippet:
JsonDataAccess ja;
QString response;
If (response-> error() == QNetworkReply::NoError) {}
const int available = response-> bytesAvailable();
If (available > 0) {}
answer = QString::fromUtf8 (response-> readAll());
qDebug()< "tag="" name="" is="" ::=""><>
QVariant jsonva = ja.loadFromBuffer (response);}
even after the addition of the LIBS +=-lbbdata in the .pro file I get no success here.
Help, please
Concerning
Don't forget to:
-
Unable to poll for new messages on your HTTP server. 0x800CCC33
Outlook express 6.0 error message
Unable to poll for new messages on your HTTP server. Account: 'Hotmail', server: 'http://services.msn.com/svcs/hotmail/httpmail.asp', Protocol: HTTPMail, server response: 'Forbidden', Port: 0, secure (SSL): no, Server error: 998, Socket error: 122, error number: 0x800CCC33
Please see similar to the following thread:
-
Emails from Outlook Express error: unable to poll for new messages on your HTTP server.
When you set up Outlook Express and send/receive I get the following message: unable to poll for new messages on your HTTP server. Account: 'Hotmail', server: 'http://services.msn.com/svcs/hotmail/httpmail.asp', Protocol: HTTPMail, server response: 'Forbidden', Port: 0, secure (SSL): no, Server error: 998, Socket error: 87, error number: 0x800CCC33. How can I fix?
How to add your Hotmail account to Microsoft Outlook Expresshttp://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194cHotmail and MSN accounts POP3/SMTP Accesshttp://liveunplugged.spaces.live.com/blog/CNS! F92775FC46A390CA! 422.entry? a = 88094129 -
Google Chrome is showing HTTP 500 Server error
MY GOOGLE CHROME SHOWS SERVER HTTP 500 ERROR. How do I FREE THIS DIFFICULTY.
Hello SusanWO,
Since there is a mistake in Google Chrome, you must contact Support to Chrome.
Click on here for a link to Google Chrome Support.Thank you
Marilyn
-
MUV pull updates from an https Server
Hi everyone, strange question that I hope that people can enlighten us on!
I'm under ESX vSphere installed on the server for vSphere Update Manager 5.1 and 5.1. This server is behind a proxy, which is configured to allow HTTP and HTTPS traffic but VUM does not connect to the default value of two https://hostupdate.vmware.com/ repositories, only the http://vapp-updates.vmware.com a.
The proxy has been in place longer than the server vSphere and is "known" (for example I'm knocking this forum secure through it without problems, and can hit the VUM Server https sites). Proxy is set to do not to require authentication of the VUM server. There is a firewall between the VUM server and proxy and I look at the newspapers on this subject shows when VUM hits the site of port 80, the proxy is used. However by hitting the sites of port 443, VUM tries to go directly to the site and don't know the proxy and getting grave by the rule of cleaning. The firewall allows traffic 443, but only when directed to the proxy, which is not the case.
Within VUM I configured the proxy settings, but to the best of my knowledge, I am only able to configure it to use port 80, unless there is a way to put it use 80 or 443?
Any ideas what I am doing wrong, or can configure differently?
Thanks in advance.
Pete
Hi all, I solved the problem with the help of this blog:
http://www.happysysadm.com/2013/02/problem-with-SSL-in-VMware-vCenter.html
A simple frustrating difficulty, which took a long time to come to light!
-
problem with oracle11g weblogic server (10.3.6) silent install
Hi all
I try to install server WL via silent mode.
The silent.xml I use is the following
<? XML version = "1.0" encoding = "UTF-8"? >
<! "- silent install option--mode = silent - silent_xml="/u01/app/wlogic/sil/silent.xml "-->
<? XML version = "1.0" encoding = "UTF-8"? >
< bea-Installer >
< input-fields >
< name value = "BEAHOME" value = "/ u01/app/wlogic/sil" / >
"< name value ="WLS_INSTALL_DIR"value="/u01/app/wlogic/sil/wlserver_10.3 "/ >
< value name = "COMPONENT_PATHS".
value = "Server/Core WebLogic application server |" WebLogic Server
/ Administration console. Upgrade and the WebLogic Server Configuration Wizard.
Framework | Server HTTP Pub - Sub WebLogic Server/Web 2.0 | WebLogic Server/WebLogic
JDBC drivers. WebLogic Server/third party drivers JDBC | WebLogic Server
/ WebLogic Server clients. WebLogic Server/WebLogic Web Server Plugins
| WebLogic Server/UDDI and Xquery support. Examples of WebLogic Server/Server"/ >
< name value = "INSTALL_NODE_MANAGER_SERVICE" value = "no" / >
< name value = "INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value = "yes" / >
<!--
"< value name ="LOCAL_JVMS"value="/usr/java/jdk1.7.0_07 "/ >
->
< / entry-fields >
< / bea-Installer >
Installation returns a failure code "null."
I use generic Setup and installed successfully through the console and GUI mode.
The OS is Red Hat Enterprise Linux 5.4 (32 bit on machine VWare).
I also tried on Windows 7.
I am at my wits end and any help would be appreciated.
Thanks in advance
Jitendra
PS: - I'm new here and that is why any forum policy may have been violated by me is unintentional.Jitendra,
When you perform the installation by default, there is no need to specify the list of products at silent.xml. I use the text depending .cmd file (you can convert this to .sh) and silent.xml for install for quite awhile and it works well.
Silent.cmd
-------------
REM run the installer in silent mode
off @echo
wls1035_oepe111172_win32.exe - mode = silent-silent_xml=C:\softwaredownload\silent.xml-log=C:\softwaredownload\products_silent.log
@rem return an exit code to indicate success or failure of the installation
define exit_code = %ERRORLEVEL%@echo.
@echo Exitcode = exit_code % %
@echo.
@echo exit Code key
@echo ---------------
@echo 0 = installation completed successfully
@echo - 1 = installation failed due to a fatal error
@echo - 2 = installation failed due to an internal XML parsing error
@echo.Silent.Xml
-------------
Thank you
Laurent Mathieu
http://toyork.blogspot.ca -
(Main) HTTP Server error log
Hello
I have an error as follows in the application server log
[Mon Jul 16 05:33:05 2012] [error] [client xxx.xxx.x.xx] [ecid: 0, 1342398785:xxx.xxx.x.xx:1408:2452:537] File does not exist: c:/oracle/frhome_1/forms/java/java/awt/KeyboardFocusManager.class
[Mon Jul 16 05:33:06 2012] [error] [client xxx.xxx.x.xx] [ecid: 0, 1342398786:xxx.xxx.x.xx:1408:2500:824] File does not exist: c:/oracle/frhome_1/forms/java/java/awt/event/MouseWheelListener.class
Server applications (forms and Services report)_
Version 10.1.2.0.2
Component server HTTP of Type (Main)
_ Windows
Windows Server 2003
PL. help me how to remove this error or where I can get this class file?
I will be very thank full to you
Kind regards
Zafar IqbalHi zak,.
Please check out the forum post [url https://forums.oracle.com/forums/thread.jspa?threadID=888257] Apache error log for more information on this error message.
Thank you
EJ -
Download the file to the http server
Hello world
In APEX, how can upload a local file or machine image to server http folders?
Thank youYou can:
1. create a side process server outside of the Apex, for example
http://www.w3schools.com/php/php_file_upload.asp2 use Apex to download the file on the original Apex glass and have a pl/sql stored procedure to write the BLOB in the file downloaded.
Maybe you are looking for
-
HelloI'm having a problem where in firefox is far from the low resolution of the gmail page. The images are very large and fonts and others are staggered greatly. Compare gmail in chrome, I see at least 50% or more of my e-mails and images are much s
-
Portege M400 - how to remove the Protector Suite fingerprint data
Hi all (1) Protector Suite 5.4 sometimes generated a crash of Windows XP on my Portege M400. (2) I followed the suggestion of WinXP and upgraded to version 5.8. Unfortunately, this way I lost the automatic access features to Web sites protected by (t
-
Amazon premium video App takes too large storage capacity.
I received a message that I'm almost out of storage on my iPad. Wen, I was looking at the storage manage I see 1.5 GM has used the first Amazon Video App on my iPad. When I click on it it shows 1.4 GB of documents and storage. I only download movies
-
I have windows vista home edition because I think it's slow, can I upgrade to windows 7
-
Custom fonts: min and max maximum size on the font file?
Hello What is the limit of file size (max and min) on the font file for loading custom fonts? I have search the Forum and found a comment by Peter_strange. "The documentation says 60 K or 90K depending on how load you, 90 K if you load a an InputStre