Server, or recognizing PC

Similar Questions

• OSX Server 5 - Dynamic IP?

  Hey guys, I am using a server OSX on Lion for the last 4 years to host multiple websites. Since I have a dynamic IP, I use a dynamic dns service all that time (noip.com) to keep track of my external IP address and point the nameservers for my domain to. Using the application server 3 on Lion was easy and allowed me to set a DHCP reservation that I had assigned internally (192.168.1.10) which was outside the DHCP range.

  I'm not too well versed in such things so I hope that my explanation above of our previous configuration is sufficient. So since last night I upgraded the server to El Capitan and bought the new server (server software 5 I think), and I can't for the life of understand me what I can do here to get my sites Web working again. The server application recognized the file locations and reported on Web sites, but is more I will define a specific IP address (that is, the reserved 192.168.1.10) for Web sites.

  Can anyone offer some advice on how to get my site back operational? I still have the update dynamic IP works but I can not understand how to say my sites to use the specific DHCP reservation, that I put in place.

  Thanks in advance and I will follow this post closely if no additional information is necessary.

  -David

  I can't test these instructions at the moment, but I think you want "multiple", i.e. more that one IP address on the same network adapter. Use

  System Preferences > network

  and to add a new service ethernet with ip address is 192.168.1.10. In the section Web sites on the server, it should appear on the drop-down list when you create a new Web site the IP address, or change an existing one.

  HTH

  C.

• I need help with this error on VMware Server 2

  Hello world!  I'm new to using this site, but not to a large part by using VMware, VMware Server software. I have worked with it for 1.0.5 version. I have a Dell 2950 PowerEdge Server with Red Hat 5.2 and VMware Server 2. I installed 3 virtual machines and I made a backup of any of it. I copied this entire virtual machine to another computer (Dell Optiplex 755) with the same Red Hat 5.2 and VMware Server 2 and I added the virtual machine properly in the inventory of machines with VMWare Server 2 recognized the very fast machine. But when I press Play to start the virtual machine I got the error that appears on the image and I don't know what can be the problem.

  Can someone help me please?

  Thank you very much!

  William Anderson

  It looks like may have copied the files when the virtual machine is not correctly - stop search *.lck files/folders in the destination folder and delete them. Also, make sure that the account running the VMware process has permissions to write to the files/folders.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• refine for cisco device logging

  Dear Netpro community,

  I'm trying to tweak the AAA portion on the cisco device

  Here is my current setup:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  If the radius server is offline, the first level is not a problem. However, the problem occurs if I want to go to activate the mode. It will not use the enable password set locally, but instead he will go to and search radius for authentication server.

  Debug:

  test_switch > en

  Password:

  01:05:15: RADIUS: authentication using the $enab15$

  01:05:15: RADIUS: ustruct sharecount = 1

  01:05:15: RADIUS: pass on tty0 id 44 x.x.x.x:1812 initial, request for access,

  Len 72

  01:05:15: 4-6 AC10E10F attribute

  01:05:15: 5 6 00000000 attribute

  01:05:15: 61 6 00000000 attribute

  01:05:15: assign 1 to 10 24656E61

  01:05:15: assign 2 18 69ABFDF8

  01:05:15: 00000006 6 6 attribute

  01:05:20: RADIUS: retransmission id 44

  01:05:25: RADIUS: retransmission id 44

  01:05:30: RADIUS: retransmission id 44

  Password:

  01:05:35: RADIUS: marking x.x.x.x:1812, 1813-dead server

  01:05:35: RADIUS: tried all servers.

  01:05:35: RADIUS: no valid server found. Try any viable Server

  01:05:35: RADIUS: tried all servers.

  01:05:35: RADIUS: no response for id 44

  01:05:35: RADIUS: no response from Server

  Password %: timeout expired.

  % Authentication failure.

  How can I make sure that I can access the switch privilege mode if there is no path to the radius server?

  It took 20 seconds of the original program:

  01:05:15: RADIUS: pass on tty0 id 44 x.x.x.x:1812 initial, request for access,

  Len 72

  ... with three broadcasts, until the server has been marked dead:

  01:05:35: RADIUS: marking x.x.x.x:1812, 1813-dead server

  Maybe you should mark a server RADIUS MIA as death more quickly, by setting a timeout of the RADIUS server (for example: 1 sec.).

  for example:

  RADIUS-server host aaa.bbb.ccc.ddd auth-port 1812 acct-port 1813 timeout 1 key xxxxxxxxxx

  If the server is recognized as dead earlier (4S, broadcasts incl. 3) maybe it's possible to use the locally configured enable password before the "time-out of password occurs".

  I do not say for sure that this will solve your problem, but I know I want to try it to find out.

• Problem is WKA to work

  I use 3.3 consistency on RHEL.
  
  I did a simple test to understand how addresses Well Known worked and tried this test:
  
  I created a replacement file with the following
  
  < coherence >
  unicast-listener <>
  < well-known-address >
  < code socket-address = "1" >
  < address > 10.100.4.54 < / address >
  < port > 9200 < / port >
  < / socket-address >
  < code socket-address = "2" >
  < address > 10.100.4.54 < / address >
  < port > 9400 < / port >
  < / socket-address >
  < / well-known-address >
  < / unicast earphone >
  < / coherence >
  
  On one of the servers, I ran the following command
  java-Dtangosol.coherence.override=./ra-coherence-override.xml-Dtangosol.coherence.localport=9200-jar./coherence.jar+.
  
  leading to the following
  
  Consistency of Oracle Version 3.3/387
  Grid edition: development Mode
  Copyright (c) 2000-2007 Oracle. All rights reserved.
  
  * 2008-12-12 17:06:38.739 GE Oracle coherence 3.3/387 < WARNING > (thread = main Member, = n/a): UnicastUdpSocket failed to set receive the size of the buffer of 1428 (2096304 bytes) packages; actual size is 89 packages (131071 bytes). Consult the documentation of your operating system with regard to the increase in the size of memory buffer maximum taken. Proceed to the actual value can cause suboptimal performances.*
  * 2008-12-12 17:06:39.012 GE Oracle coherence 3.3/387 < D5 > (thread = Cluster, Member = n/a): Service de Cluster has joined the cluster with the senior members of the service s/o *.
  * 2008-12-12 17:07:09.511 GE Oracle coherence 3.3/387 < Info > (thread = Cluster, Member = n/a): creates a new cluster with Member(Id=1, Timestamp=2008-12-12 17:06:38.788, Address=10.100.4.54:9200, MachineId=27190, Location=process:7172@toro-app03, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=4) UID = 0x0A6404360000011E2DE17C446A3623F0 *.
  SafeCluster: Name = n/a
  
  * Group {address = 224.3.3.0, Port = 33387, TTL = 4} *.
  
  MasterMemberSet
  *(*
  ThisMember = member (Id = 1, Timestamp = 2008-12-12 17:06:38.788, address = 10.100.4.54:9200, MachineId = 27190, Location=process:7172@toro-app03)
  OldestMember = member (Id = 1, Timestamp = 2008-12-12 17:06:38.788, address = 10.100.4.54:9200, MachineId = 27190, Location=process:7172@toro-app03)
  ActualMemberSet = set of members (size = 1, BitSetCount = 2.
  Member (Id = 1, Timestamp = 2008-12-12 17:06:38.788, address = 10.100.4.54:9200, MachineId = 27190, Location=process:7172@toro-app03)
  
  
  
  On another machine I want to join this group, I ran the following command
  
  java-Dtangosol.coherence.wka=toro-app03-Dtangosol.coherence.wka.port=9200-jar./coherence.jar+.
  
  But I get the following error:
  
  This member could not join the cluster due to an incompatibility between this member configuration and the configuration used by the rest of the cluster. This member is set to use the WKA but isn't running cluster. This is due to one of the addresses on list WKA of this member in use on a non - WKA cluster. Rejected by Member (Id = 1, Timestamp = 2008-12-12 17:06:38.788, address = 10.100.4.54:9200, MachineId = 27190, Location=process:7172@toro-app03).
  * 2008-12-12 17:07:13.515 GE Oracle coherence 3.3/387 < D5 > (thread = Cluster, Member = n/a): Service de Cluster left the cluster *.
  
  I can solve this problem by starting the first server with the following command
  
  java-Dtangosol.coherence.wka=toro-app03-Dtangosol.coherence.wka.port=9200-Dtangosol.coherence.localport=9200-jar./coherence.jar*.
  
  
  
  Why is he in the first case the server not recognized as having a WKA boot?
  
  Thank you

  This happens because the first node is not put into service configured WKA. Looks like there could be a typing error in your config file. I think that XML schema should look like:

  
  
  
  
  
  ...
  
  
  ...
  
  
  
  
  

  I think you are missing the cluster-config; can try again you with who?

  Thank you
  -Rob

• TV not recognized by the server-&gt; 40L 73

  Hello

  My problem is already listed on this forum but I can't find a solution or explanation.

  I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

  Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

  When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
  But unfortunately he will not stay for the next time.

  Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

  Any suggestion? May be related to an IPv6 Internet connection?

  In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

  And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

  Thanks for your help and your comments in advance.

  Maybe you should just a few solutions of circumvention of the Commons:
  First, you must set the default TV.
  Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

  By the way: you should also check if your firmware is up to date. This can be checked here:
  http://www.Toshiba-OM.NET/firmware.php

• DVD player not recognized after starting in windows server 2003 r2

  I installed Windows Server 2003 R2 Std on my HP DL180 G6 by using the internal DVD player, but after booting into windows, the DVD drive could not be recognized and it's showing in the 'PCI device' Device Manager under "Unknown device" with a yellow question mark. I googled and tried some of the solutions, also tried to reformat and reinstall Windows, but still facing the same problem. HP support gave me some solutions like updated BIOS, erasing the CMOS memory, unplug and plug back the sata cable, but always without success.

  Hi Lilida85,

  The question you have posted is related to Windows Server 2003 R2 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  Windows Server

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Sound card not recognized by windows server 2008 r2 on h8 1120

  Hello

  I installed Window server 2008 r2 (x 64) on my new h8 1120it

  It was a pain to find all the drivers and install it, but finally I did it!

  .. almost. Because my sound card is not recognized by the system

  If I look in Control Panel of-> system-> Device Manager all the drivers are ok (no point warning exclamation!)

  Under the terms of his, I have 4 audio devices by NVIDIA and 1 generic audio device high definition with a microsoft driver installed

  Any suggestion?

  Solved! He just needs to activate audio services
  Sorry

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• Unable to connect wireless DNS server is not recognized.

  My laptop won't connect wireless does not have the DNS server has never had a problem before

  Hi Roger,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the issue you are unable to connect wirelessly because there do not recognize the DNS server. The problem may be caused, if there is a miss match the IP address configuration. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2

  If the problem persists, I suggest you to release and renew the IP address. For this you can see the steps below.

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 3

  If the problem persists, try to reset the TCP/IP stack and see if it helps you to solve the problem. To reset TCP/IP, you can refer to the procedure described in the article mentioned below. If fixit does not help, try to follow the manual steps.

  How to reset TCP/IP using the NetShell utility

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• get the dns server does not, or not recognized

  I get the DNS message is not not responding or not recognized

  This started recently?  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• Folder on the remote server that is not recognized by Dreamweaver as part of the site

  I run the site of a school district. This includes the home pages and associated pages for all but one of our schools. School files were headed by a teacher of this school's web design. This professor has left, and I was asked to perform some updates on the site from high school up to what a new teacher was hired and able to take charge. My problem is that the folder containing all the files of high schools is one of the many issues in the Group of largest school district, the folders on the remote server, my Dreamweaver does not see. I can use Windows Explorer to find the folder and it's there. I can use a tool such as Notepad ++ to open the files and make changes. They are here and I can visit her profile. But for some reason any Dreamweaver doesn't recognize them not as part of my site. I can't 'get' file, or a synchronization because Dreamweaver does not see this folder on the remote server. I think it's a matter of Dreamweaver, but I don't know how to fix it.

  Thanks for all your suggestions. I'm home now and remembering that I'm working on the site of the House and at work, I realized that I can see the folder of the secondary school on the remote server of the House where I have Dreamweaver to connect via FTP. I can't see it on my computer at work where I connect to the remote server through a local/network connection. There may be a clue here. If I switch to a FTP connection to work, maybe I see the folder.

  UPDATE: I changed the type of connection on my computer work of local/network, FTP and high school record is now visible on the remote control. Don't know why it makes a difference, or if this will lead to new questions, but I'm good for now.

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.