Server SOA is not... launched tons of errors saying CONFIGURATION FAILED!
Hello SOA experts, can you please help me! I tried the solution to my problem in the lot of forums but I have not found anyone with my problem, except one person in 2010 butNobody answered to him and no idea why?
Hopefully some expert SOA will help me.
I have installed soa suite 11.1.1.5.0 nearly 15 times. But the server happens only the first time and I can deploy SOA application and test it.
But once I stop the server consistently, then no more server just came up. Instead, I get 100's of errors saying
< 7 December 2011 8:18:40 CEST > < WARNING > < HTTP > < BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.Configurat
ionException: CONFIGURATION FAILED! javax.faces.event.ActionListener and tons of errors saying "< cannot set the activation state of true to the application...". » :
< 7 December 2011 14:18:55 this > < WARNING > < HTTP > < BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.Configura
ionException: CONFIGURATION FAILED! javax.faces.event.ActionListener.
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:214)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:200)
to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
Truncated. check the log file full stacktrace
Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< impossible to affect the activation state of the application "ApproveTaskDetails". ............. Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< BEA-149231 > < cannot create the activation state to true for the application "POProcessing". ........ Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< error > < hats > < BEA-149231 > < cannot create the activation state to true for thei application 'usermessagingserver '. ...................... Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener.
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener...
......
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
.........................................................
Because of not enough RAM ? I * 3.45 GB of RAM and 30 GB available in my hard dur.* Oracle XE is running by taking the 500 MB of RAM. As soon as I start my m/c, I'm trying to implement SOA server, but he died by throwing over the mistakes.
I'm really handicapped now by not only not my SOA server. My domain name has only one server. No separate server from SOA. I was not choosing BAM when I created the field.
I can send you described the papers if you wish.
Really appreciate your help.
Thank you.
Hi Jyothi
I think the problem is maybe too long Classpath. I compared your entries to adminserver.log and mine, specially the variables file approx. We're like "java.class.path". The value of this on my side is like 2200 characters and the last entry is "xqrl.jar". But on your side, it's like 6600 characters. You can find "xqrl.jar" and see the entries after that. He had many entries of your c:\Jwhich\build\lib\jwhich.jar;c:\jyothi_workspace slots. Now big question why do you have these entries. What is 'jyothi_workspace' have. If possible, check your files setDomainEnv and setSOADomainEnv to these entries and for the moment to remove those.
You can restore the changes you did as "/" to "------" etc. Or just create new domain. Area just to help Wizard Config. Do not install anything. If possible, send your phone number to my email ID. I'll quickly call you by phone.
I suppose that, if classpath is too long it is not load all the modules, I guess that since the classpath.
Thank you
Ravi Jegga
Tags: Fusion Middleware
Similar Questions
-
Hello
I met the following WebLogic errors during startup. I use WebCenter Content Server 11.1.1.8 or WebLogic 10.3.6. I managed to start the server and not having problems so far, but I'm curious about the error.
System = SunOS
Output = 5.10
KernelID = Generic_150401-11
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
/opt/Oracle/middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/bin/startWebLogic.sh: =: $: not found
export ALT_TYPES_DIR
export ANT_CONTRIB
export ANT_HOME
export APPLICATIONS_DIRECTORY
export ARDIR
export BEA_HOME
export BEA_JAVA_HOME
export CLASSPATHSEP
export CLUSTER_PROPERTIES
export COHERENCE_HOME
export COMMON_COMPONENTS_HOME
export CUSTOM_MEM_ARGS_32BIT
export CUSTOM_MEM_ARGS_64BIT
export DATABASE_CLASSPATH
export DEBUG_PORT
export DERBY_CLASSPATH
export DERBY_FLAG
export DERBY_HOME
export DERBY_OPTS
export DERBY_SYSTEM_HOME
export DERBY_TOOLS
export DOMAIN_HOME
export EXTRA_JAVA_PROPERTIES
export FEATURES_DIR
export FMWCONFIG_CLASSPATH
export FMWLAUNCH_CLASSPATH
export JAVA_DEBUG
Export JAVA_HOME
Export JAVA_OPTIONS
export JAVA_PROFILE
export JAVA_PROPERTIES
export JAVA_USE_64BIT
export JAVA_VENDOR
export JAVA_VM
export LD_LIBRARY_PATH
export LONG_DOMAIN_HOME
export MEM_ARGS
export MEM_ARGS_32BIT
export MEM_ARGS_64BIT
export MEM_DEV_ARGS
export MEM_MAX_PERM_SIZE
export MEM_MAX_PERM_SIZE_32BIT
export MEM_MAX_PERM_SIZE_64BIT
export MEM_PERM_SIZE
export MEM_PERM_SIZE_32BIT
export MEM_PERM_SIZE_64BIT
export MODULES_DIR
export MW_HOME
export OBJECT_MODEL
export OCP371_PATCH_CLASSPATH
export OCP371_PATCH_EXT_DIR
export OCP371_PATCH_LIBPATH
export OCP371_PATCH_PATH
export ORACLE_DOMAIN_CONFIG_DIR
export PATCH_CLASSPATH
export PATCH_LIBPATH
export PATCH_PATH
export PATH
export PATHSEP
export POST_CLASSPATH
export PRE_CLASSPATH
export PRODUCTION_MODE
export PROTOCOL_HANDLERS
export SAMPLES_HOME
export SERVER_CLASS
Export SERVER_NAME
export SUN_JAVA_HOME
export UCM_ORACLE_HOME
export WEBLOGIC_CLASSPATH
export WEBLOGIC_EXTENSION_DIRS
export WLS1036_PATCH_CLASSPATH
export WLS1036_PATCH_EXT_DIR
export WLS1036_PATCH_LIBPATH
export WLS1036_PATCH_PATH
export WLS_HOME
export WLS_JDBC_REMOTE_ENABLED
export WLS_MEM_ARGS_32BIT
export WLS_MEM_ARGS_64BIT
export WL_HOME
export XMS_JROCKIT_32BIT
export XMS_JROCKIT_64BIT
export XMS_SUN_32BIT
export XMS_SUN_64BIT
export XMX_JROCKIT_32BIT
export XMX_JROCKIT_64BIT
export XMX_SUN_32BIT
export XMX_SUN_64BIT
export debugFlag
export doExitFlag
export enableHotswapFlag
export iterativeDevFlag
export logErrorsToConsoleFlag
export testConsoleFlag
export verboseLoggingFlag
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory
.
.
Memory of JAVA arguments: - Xms2048M-Xmx2048M - XX: MaxPermSize = 512M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX: + PrintGC - XX: + PrintGCDetails - XX: + PrintGCDateStamps
.
Start mode of WLS = Production
.
CLASSPATH=/opt/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/opt/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/webcenter/jdk/lib/tools.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ opt/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/opt/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/opt/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
.
PATH=/opt/Oracle/Middleware/wlserver_10.3/server/bin:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/apps/webcenter/jdk/jre/bin:/apps/webcenter/jdk/bin:/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/sbin:/bin
.
***************************************************
* To start WebLogic Server, use a username and *.
* password assigned to an administrator-level user. For *.
* server administration, using the WebLogic Server *.
* console in http://hostname/ReportServer: port/console *
***************************************************
from weblogic with the Java version:
Java version "1.7.0_79".
Java (TM) SE Runtime Environment (build 1.7.0_79 - b15)
Java hotspot Server VM (build 24, 79 - b02, mixed mode)
WLS starting with line:
/Apps/WebCenter/JDK/bin/Java-serveur-Xms2048M-Xmx2048M - XX : MaxPermSize = 512 M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX : + PrintGC - XX : + PrintGCDetails - XX : + PrintGCDateStamps-Dweblogic.Name=AdminServer-Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-da-Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3-Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dcommon.components.home=/opt/Oracle/Middleware/oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN-Djrockit.optfile=/opt/Oracle/ Middleware/oracle_common /modules/Oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.server.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/servers/AdminServer-Doracle.domain.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig-Digf.arisidbeans.carmlloc=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/carml-Digf.arisidstack.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/arisidprovider-Doracle.security.jps.config=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/jps-config.xml-Doracle.deployed.app.dir=/opt/Oracle/Middleware/user_projects/domains/ WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user - Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Ducm.oracle.home=/opt/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/opt/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1036/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_ocp371/profiles/default /sysext_manifest_classpath weblogic. Server
< 6 November 2015 10:39:08 SGT > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 6 November 2015 10:39:09 SGT > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 6 November 2015 10:39:09 SGT > < Info > < WebLogicServer > < BEA-000377 > < since WebLogic Server Java hotspot Server VM Version 24, 79 - b02 of Oracle Corporation >
< 6 November 2015 10:39:12 SGT > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 Nov 08:52:36 PST 1441050 2011 >
< 6 November 2015 10:39:16 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 6 November 2015 10:39:16 SGT > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 6 November 2015 10:39:16 SGT > < opinion > < Log Management > < BEA-170019 > < server log file /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/logs/AdminServer.log is open. All events in the log server-side will be written to this file. >
< 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090083 > < identity of start of storage in the file: /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/security/boot.properties >
< 6 November 2015 10:39:32 SGT > < WARNING > < Store > < BEA-280109 > < unable to load native library wlfileio for the persistent store file '_WLS_AdminServer '. The Bank will use I/O in the buffer. The store is still in business in a point of view transactional secure synchronous mode. See store open log messages for requested and final write policies. >
< 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 6 November 2015 10:39:47 SGT > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 6 November 2015 10:39:48 SGT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the em of the application is not versioned. >
< 6 November 2015 10:39:53 SGT > < WARNING > < J2EE > < BEA-160140 > < optional references package suspense (in META-INF/MANIFEST. (MF): [Extension name: oracle.rules referenced from: / opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user/emai/xalnv4]. Check that the referenced optional package has been deployed as a library. >
< 6 November 2015 10:39:55 SGT > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Information ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Performance ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Response ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Servlet_Response ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Remote_Bridge_Elements ' has no key column. It will not be seen. >
< 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < metric "webcache:request_filter_denied_stats" table has no key column. It will not be seen. >
PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.
< 6 November 2015 10:40:06 SGT > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature. >
< 6 November 2015 10:40:07 SGT > < WARNING > < oracle.mds > < BEA-000000 > < by default CharSet US-ASCII is not a unicode character set. Filenames with non-ASCII characters may not work as expected. Check regional settings. >
< 6 November 2015 10:40:11 SGT > < WARNING > < org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl > < BEA-000000 > < Configurator services already initialized. >
< 6 November 2015 10:40:19 SGT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
< 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.21.102.239:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 10.253.163.194:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.24.143.146:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 192.24.143.2:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 127.0.0.1:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on 192.24.143.68:7005 for iiop, t3, ldap, snmp, http protocols. >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000329 > < started WebLogic Admin Server "AdminServer' field 'WEBCENTER_CONTENT_DOMAIN' running in Production Mode >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
< 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
< 6 November 2015 10:48:36 SGT > < warning > < WebLogicServer > < BEA-000396 > < server shutdown was requested by admin >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed suspension >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to SHUTTING_DOWN >
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [2] "listening on 192.21.102.239:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [1] "listening on 192.24.143.146:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was "Default" channel to listen on 192.24.143.2:7005 > stop.
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [5] "listening on 127.0.0.1:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [4] "listening on 10.253.163.194:7005 > stop."
< 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < channel "Default [3]" was listening on 192.24.143.68:7005 > stop.
Have you followed the installation guide and completed all the pre-requisutes?
Please check:
ls-l /usr/lib64/libstdc++.so.5
-
WMA via DropBox server name may not correct or available error files
I need to download some WMA files & sent m4a
through Dropbox.
I checked the proxy settings and all is well.
Error message states that,
and the server refuses to perform the required operation.
Any ideas on how I can play these files? \
Thank you very much.
Hello
1 get playing with all the files?
2. what operating system is installed on the computer?
3. your computer connected to a domain is?
4. were there any recent changes to the computer before this problem?
5. what application you use to read the files?
If you use Windows media player to play the files then I suggest you try the steps below.
Method 1: run the Troubleshooter and see if it helps.
Open the troubleshooting Windows Media Player settings Troubleshooter
(Applies to Windows 7)
Method 2: If the problem persists then try to disable and enable Media Player and check.
Step 1: turn off Windows Media Player:
a. go initially and in search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find multimedia and uncheck Windows Media Player.
d. restart the computer.
Step 2: Enable the Windows Media Player:
a. go initially and in search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find the multimedia functions and place a check mark in front of the Windows Media Player.
d. restart the computer.For more information, see the article:
For Windows 7: http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
For Windows Vista: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off
Hope this information is useful.
-
Could not find the ORA error behind this failed task
Hi friends,
In the part of the load, I got a task that failed following two as
I found the log file for the task that has failed two above to the location (D > orahome > 10gR3_1 > bifoundation > dac > Journal)SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive
For, SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive I found the newspaper below
For SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive I found the newspaper belowAll Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.625 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_GL_ACCOUNT_D W_ORA_GLREVAGGR_F_TMP W_ORA_GROUP_ACCOUNT_NUM_D_TMP W_ORA_GL_REVN_GL_F_TMP Target: "BIAPPS" Tables: W_GL_REVN_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_GL_REVN_FS:BIAPPS) TRUNCATE TABLE W_GL_REVN_FS "Truncate" for W_GL_REVN_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.75 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:12.843 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] will be failed.] Workflow run id [2233]. Start time: [Mon Jul 30 16:17:18 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_GLRevenueFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive 2012-07-30 16:17:40.109 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_GL_REVN_FS ------------------------------ Not Executed ------------------------------
But the error, I couldn't analyze the exact ORA error of the foregoing two session that does not. Can you friends, help me with the cause of this error so that I can recitfy this inorder to errors for my task failed to run correctly.All Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.703 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_ORA_AR_XACTS_GL_F_TMP W_ORA_ARAGGR_F_TMP Target: "BIAPPS" Tables: W_AR_XACT_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_AR_XACT_FS:BIAPPS) TRUNCATE TABLE W_AR_XACT_FS "Truncate" for W_AR_XACT_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.968 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:13.0 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] will be failed.] Workflow run id [2236]. Start time: [Mon Jul 30 16:17:19 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_ARTransactionFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive 2012-07-30 16:17:40.453 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_AR_XACT_FS ------------------------------ Not Executed ------------------------------
Thanks in advance.
Kind regards
Saromeans that 'If this task fails that be parent' if the session fails, you're in the failure of the workflow state. DAC knows only the workflow state.
If you run the workflow in WFM, mark the task as completed in DAC.Tasks of children (Drop, Create, Informatica) DAC-> current Run-> in the lower pane, select all tasks, and then click the Details button
a pop window shows the list of tasks if exists elsewhere only a task will show you that is task Informatica.Right-click on the task-> update records-> (the State of the list Select)
Hope this helps
-
I got creative cloud for more than a month now and have not been able to get the thing to work. I spent about 2 and a half days on technical support. I tried it on two different laptops the second that I have to replace my old as the first stopped working after the support has been playing with it. So I tried it on Windows 7 and now Windows 8.1.
After that about 3 days on the stand that I now have copies of work in Photoshop and In Design. These were installed through workaround! I still can't use creative cloud.
I tried to use laptops on two different networks my system at home and my University.
I'm extremely frustrated by what I am a student and am paying a lot for something that just seems to be useless. I also had to borrow a friends computer to do my homework after spending 2 days wasted trying to get the thing working, so this is my study.
Any body know how I can solve this problem because the technical support seem to be just things bodging and the system is next to useless?
My Lap top is running Windows 8.1 64bits. There a lot of free space on the HARD disk and loads of RAM should so no problem there.
Antivirus protection is Kapersky but have tried with this disabled and also tried with McAfee on laptop initially had this installed.
Sarahb50875234 I'm sorry you are facing difficulties to use the creative Cloud Desktop application. You get specific error messages? What kind of behavior do you? You mentioned install it in Windows 7 and Windows 8.1 it was on two separate computers or did you upgrade from Windows 7 to Windows 8.1?
Finally, you said you spoke with a member of our support team. You have a file number which I can refer?
-
My current operating system ios 9.1, the latest operating system (ios 9.2) is not upgraded. A mistake is to come indicating that, "unable to verify the software update. I tried to update during the loading of the ipad, but no result. Please help me.
HAbe you never synced to a computer? You are able to update via iTunes on your computer? If so, try this way. Sometimes, it has fewer problems than to try to live update
-
Windows Messenger does not open, I get error saying Windows Live messenger stops working
Discussions in Windows Live Messenger
They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.
See you soon. Mick Murphy - Microsoft partner
-
Content Server Explorer does not
Hi all
I installed the JSK and the Sites of Webcenter console front-end works.
But with the same port of the Content Server Explorer does not work.
He says: 'cannot access Content Server Explorer with the port given with the given username and password.
Using the fwadmin credentials to access the ESC.
Could someone suggest on that.
Concerning
Bishnu
Hello
I met the same problem.
I tried following & it worked for me
in my local
I tried with the IP (127.0.0.1 for me)
name of user fwadmin
password xceladmin
serverlet as a standard servlet (catalogmanager)
Thank you
René
-
Error «Server is not ready, not launched browser»
What happened several times my ADEP installations: the quick start server starts, it hangs for a while and finally fails with an error message "Server is not ready, the browser has not launched."
Anyone know what could be the cause? For now, I just start the quickstart jar into another directory, recreate the crx, download the samples, reactivate RDS., restore the SDK in the tooling and launch new projects. This is obviously of a tedious workaround!
Thanks in advance!
I personally found dbl - clicking on the JAR file to be unreliable. As Janice, you could create a simple batch file that looks like this and run it:
off @echo
java-jar adep-platform-quickstart-10-0-all-all.jar
You can also get fancy with it, like this:
off @echo
Set JAVA_OPTS =-Server
Set JAVA_OPTS = - XX: + UseParallelGC
Set JAVA_OPTS = - XX: + UseParallelOldGC
Set JAVA_OPTS = - XX:ParallelGCThreads = 2Set JAVA_OPTS = % JAVA_OPTS %-Xms1536m
Set JAVA_OPTS = % JAVA_OPTS %-Xmx1536mSet JAVA_OPTS = % JAVA_OPTS % - XX: PermSize = 256 m
Set JAVA_OPTS = % JAVA_OPTS % - XX: MaxPermSize = 256 mJava-jar adep-platform-quickstart-10-0-all-all.jar % JAVA_OPTS
-
Plex Media Server do not launch in windows 7 64 bit
Hi, I've installed plex media server on my 64-bit windows computer 7, everything installed great that no error occurs, when it finished installing and I try to start it, it does not start. Laugh at the taskbar does not work, it highlights just the loading icon comes by the mouse pointer and the highlight fades and no window opens, but when I go to the Task Manager, I am able to see the processes running as shown.
This is a screenshot of the plex media server appears in the Manager of tasks as a running process, but however the real media server is not displayed. I would appreciate a solution for this, I tried a lot of things from a clean install (app data deleted and same HKEYS for plex in the registry), and then I tried to reinstall it but the problem persists.
chk these links
Plex will not launch
https://forums.plex.TV/index.php/topic/23758-plex-will-not-launch/
Plex Media Center does not start on Windows 7
https://forums.plex.TV/index.php/topic/48192-plex-Media-Center-wont-start-on-Windows-7/
-
Error starting Weblogic Server SOA suite
Hi all
I get the error when starting Weblogic Server SOA suite.
Password got DB which I reset, expired at however not sure where I need to be updated in SOA Console so that Weblogic Server can begin.
I am getting below error while trying to start the Weblogic Server, even after I changed the password.
===========================
Cause: weblogic.common.resourcepool.ResourceDeadException: 0:weblogic.common.Res
ourceException: could not create a connection from the pool. The exception of the DBMS driver has been:
ORA-28001: the password has expired
===========================
Please suggest.
Thank you.
Are you able to connect to the database of the user whose name OraSDPMDataSource data source are created:
Since you are not able to start the administration server, you can check the user name, where datasorce (OraSDPMDataSource) is created by passing by the following location in the file system:
\config\jdbc,there will be an XML with the name OraSDPMDataSource - jdbc.xml -
Virus & spyware definitions update failed.
error code: 0x8024402c.
Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.
Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936. I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others. I hope that this will solve the problem.
If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you. Please post with the information requested here:what to post in the Windows Update forum
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Associated error - "Server features are not compatible with UCS below.
Hi all
I am tempted to associate a SPG which the UCS field but get the following error. Under the general tab:
There are not enough global resources.
field of the UCS has no server corresponding to this service profile features.And under the status tab:
Descriptor of the stage: analysis of changes impact(FSM-STAGE:sam:dme:LsServerConfigure:AnalyzeImpact)
Tent: 0
Previous state: ConfigureFail
Remote control Err Code: 5
Distance Err Description: Server features are not compatible with UCS below.
Distance Inv result: resources-out of stock
The field of the UCS that I associate this GSP which is an existing domain, I have just signed up with Central UCS. I created and associated with a GSP scheme a UCS of greenfield in another area data center.
The two areas are running UCSM 2.2 (6 d). Central UCS is 1.4(1a).
I found a bug that suggests this may be due to the presence of a policy to Boot, but the workaround solution (remove the startup policy) does not work in this case.
So, anyone know what might be going on here?
Thank you
Richard
Richard,
Please check the following bug: CSCuy07572
You can use the global default and should work completely correctly.
You can choose the version that is required here.
Non-policy default will be a problem.
Thank you
Yoga
-
Hi guys
I upgraded from 5.3.0.40.9 to 5.5.0.46 using the upgraded application that has especially good except that CLI SSH access to the ACS does not work now. It allows me to connect, however immediately throws an error:
% Error: could not launch the ADE-OS shell. The disk is full.
I get the same error with a separate administrator account, but one of my colleagues IS able to connect without any problems.
Any ideas? Thank you.
Rama
We were see this question quite frequently in cases where client upgrade from previous versions to ACS 5.5 because in an upgrade process, it also moves the database view and fills the / opt. In your case, it seems to be 100%.
If this is the case you need to install patch of the roots and then erase the old newspapers. To do this, you must contact TAC.
Latest version of ACS 5 we have a simple 'cleandb replace acsview' command that actually do the same thing but we don't have an option to connect via SSH.
http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...
Kind regards
Jatin kone
* Make the rate of useful messages *.
-
can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message. tried to restart and got the same answer. Just set Windows to update when I logged on tonight.
Hi ginnypierson,
Thanks for posting in the Microsoft community.
I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.
Before you start the troubleshooting steps, I need the information required
1. what web browser do you use?
2. have you made any changes to the computer?
3. this problem occurs only with the particular website?
Method 1:
If you use Internet explorer, I suggest you to see link and check.
Get help with the Web site (HTTP error) error messages.
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors
Method 2:
I suggest you to see link and check.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/ro
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.
Maybe you are looking for
-
How to manage search engines in Firefox Beta for Android
When I type a search in the search bar, I get a list of search engines to use options: GoogleAmazonTwitterWikipedia I would use google.co.uk not google.com (and probably amazon.co.uk and not amazon.com) but may not know how to manage search engines.
-
Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network
Hello I upgraded my computer windows 10 laptop and it cannot detect a network. The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network. I tried
-
subnet A(192.168.137.0/24) is equipped with computers P and Q subnet B(192.168.7.0/24) a Q and R computers P is my windows 7 computer connected to the internet via the interface 10 and connected to Q interface 25 Q (Linux) has been set up to route pa
-
Windows 7 using Windows 8.
I currently have a built a PC and need to activate Windows 7 Professional key with in 30 days. I tried the key that I got, but Microsoft said that the key is not working so I have a key for Windows 8 now and do not know how to upgrade to Windows 8 to
-
Installation of updates of Windows 8: failure! Error: 800F082F
Just re-installed my windows 8.0 and I wanted to install all of the updates. Have 87 updates for me, selected them and clicked on install. Waited until they have finished downloading, then I saw that windows only 3 updates installed, windows remains