Service DcomLaunch CPU Spikes

Similar Questions

• In "Services.exe" CPU usage increases to 100 percent XP.

  In "Services.exe" CPU usage increases to 100 percent XP. Attempt to disable Load System Services through the system without result Configuration utility, because cpu cannot handle this function before of 'Services' system of pigs. Is there a way to access msconfig. through BACK? Have tried all modes safe mode, same problem.

  I would exercise caution in handling things in the System Configuration utility.  If you disable the thing (s) evil, you could make your problem worse.

  I suggest provide you a little more information on your system, run some scans for malware, then fix what's left more that needs fixing.

  If you see services.exe equips in the Task Manager, suspect malware first, work to eliminate this possibility (with the scans below), then if you still have a problem, we can fix.

  It makes no sense to try to solve problems on a system that could have malicious software on it.

  You can also try to run system restore if you want, but I don't really know, it counts as 'fixing' of the problem.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  No matter what you use for malware protection, perform the following analyses for malware.
  then fix any problems:

  Download, install, update and do a full scan with these malware free
  detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• Satellite L755 - PSK2YE - upgrade of Windows 8 - CPU spikes driven at the start of app

  Hello

  Recently, I upgraded my OS Windows 8 Pro.
  Since then, when I open an application or a new Web tab which requires some effort from shockwave plugin or gpu process, I noticed a spike cpu which lasts 3-9 seconds.

  These spikes increase the temperature of the cpu from 50 ° c to 70 ° c.
  But when the spike is complete, gets back to its usual temperature (50 ° c).

  I have tried almost everything I read, but so far nothing has solved the problem. I tried the clean boot, safemode (network option checked), active the windows updates manual, at the request of maintenance at a specific time, disabled an option that allows atheros controller turn the unit off when the laptop is in sleep mode.

  My drivers are all up to date, so I don't really know what's going on, so I would be sincerely grateful for your help.

  Other info:

  Toshiba Satellite L755 - PSK2YE (cpu - i5 - 2.30 GHz / RAM - 4 GB / 64-bit)

  PS: Three months ago, I sent my laptop to a toshiba centre clean the flue.
  I use balanced energy mode, but the same problem occurs when I use high performance one.

  However in power saving mode there is no ears at all. I used to see the same behavior when I reduced the maximum processor state to 95%.

  > However in power saving mode, there are at all without crampons. I used to see the same behavior when I reduced the maximum processor state to 95%.

  The spikes appear due to stress CPU.
  I noticed something similar to running some applications Chrome for a few seconds, the CPU would be stressed to the point where the fans begin to run with the highest performance. After about 5-10 seconds, CPU load goes down and the fans run slower.

  I guess that's a result of bad programming of some applications such as constraints of software the CPU too

• Slow computer - CPU spikes

  Dell Dimension 3000 Desktop, Windows XP - SP3.   My computer was slow substantially lately so I researched the potential causes.  Performed several scans for viruses and malware with none detected.  Ran a msconfig to see if something was running at startup I knew - again nothing unexpected.  Then I looked in the Windows Task Manager.  With nothing else running - it's nothing listed in the Applications tab and do not touch the keyboard or the mouse, when look at the CPU usage, I noticed there's a spike to nearly 60% for 5 seconds of every minute.  Is this normal, or should I look for more strong something running in the background?  Suggested next steps?

  This has been resolved in the end like a malware problem.

• Vista does not start after I disabled the service DCOMLauncher

  Hi all.   I really hope that someone can help me with this, because I can't use my computer at all, and I have to use a notebook different to write this post.

  The problem: Windows Vista does not start with the normal settings or Mode without failure.   To be more precise, after Vista starts, he has only a black screen and a limited mouse functionality.

  The background & problem: I use Windows Vista Home Premium SP 2.   I have disabled the DCOMLauncher Service using the program Autoruns from Sysinternal.

  What I tried: I tried to start Vista in Mode safe with no result.

  Thanks to all those who are trying to help me.

  When you choose Safe Mode choose last known good startup.

  As long as your subsequent boots are deemed unsuccessful, which is perhaps not the case, this will start the configuration before using Autoruns.

  Safe Mode command prompt works?

• Regular CPU spikes every 15 seconds with USB 2.0 audio, fix, but refuses to install.

  When streaming audio via the audio interface USB 2.0 Audio Class Compliant on Windows 7 Professional 64 bit update, there's regular CPU usage spikes up to 100% every 15 seconds, sometimes amounting to audio dropouts. Utility LatencyMon v6.5 reports that huge amount of CPU time is spent inside the usbport.sys driver whenever there are any audio stream of isochronous USB happening. I know that there is a supposed to be available to target exactly this problem - https://support.microsoft.com/en-us/kb/981214 fix - but the fix refuses to install, probably because the fix itself is quite old and does not seem to recognize the latest versions of the drivers usb*.sys on any instance to date of Windows 7.

  I have tested and confirmed this problem on two different mobile-class workstation laptops from different manufacturers, both based on Intel 7 series / C216 QM77 chipset (Panther Point) and using the integrated chipset USB host controllers to connect to the audio interface (a 18i20 of Focusrite Scarlett). One of the laptops has EHCI and controllers xHCI routed to different physical ports, the other laptop has all the physical ports connected to xHCI; It might be interesting to note that the problem seems identical to the audio interface is connected to EHCI or xHCI. All other possible causes that usbport.sys were eliminated by a careful configuration and the measure, i.e. There is no limitation, no turbo CPU, no CPU C-State, not of processor HyperThreading, no food, no virtual memory paging management event, not even any SMI (System Management interrupt) passes, everything boils down to usbport.sys hogging the CPU.

  It would also be interesting to note that according to Intel, there are a bunch of bugs known to host USB controller Series 7 / C216 chipsets, one can find an Errata section detailed from page 15 of the document Spec update - http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/7-series-chipset-pch-spec-update.pdf

  Could this problem hogging CPU actually come from bugs in the hardware host controller USB drive operating system driver nuts? Or it comes from a bug unrelated in the OS driver? And what happened to the existing of the fix, why he refuses to install the operating system to date and how is the same old problem suddenly reappeared on automatically updating Windows 7 systems?

  It is in any event, that my most sincere and humblest hold like a paying customer for a hotfix update fix this if possible, one that is truly committed to settle. Without corrective work, Windows 7 machines are quite useless for all serious audio work. I also feel that I speak not only for me but for all members of the global computer audio community who are trying to use Windows 7 with audio USB.

  Just upgraded my Windows 7 Professional for Windows 10 Pro and the issue hogging CPU is now gone - no pics no CPU more, more dropouts no audio USB. (It would still be nice to have a fix for Windows 7 someday, too)

• Windows 7 use of the CPU Spike!

  I use Windows 7 SP1. There is a CPU usage spike suddenly after using the PC after some time. It happens even in the State of Hibernation. When its fine in hibernation, but several times he wake spikes and continues until the reboot. After the reboot, the use is back to normal. Manager tasks shows the tip down and the machine slows down but does not show processes running non-use and even process idle is normal. Its a Windows 7 specific problem because previously I had XP and ran very well.

  Please solve this problem someone very annoying sound.

  Finally, my problem is solved. Thank you Gerry C J Cornell.

  : D
  Malwarebytes could not find the Malware but just nailed SuperAntiSpyware. I did as you suggested a few days back, but was waiting to see if problem surfaces, but it didn't.

• 'Launchd' Mac + WebTools in console CPU spikes

  Okay, so I'm on a macbook of 2014 pro environment. I have never had problems with it since I got it. But, I noticed that lately her fans did turn full throttle while it is inactive. Out of curiosity, I checked the console and the activity monitor to see if something weird was going on. And of course, I "launchd" in the activity monitor from 50% to 90% of cpu usage cpu. In addition to this, a process called "WebTools" (it looks like malware) continues to try to run, spamming the console with this:

  

  Someone help me please to get rid of this. Thank you.

  Well, it's resolved. I tracked the WebTools file, and that seemed to work.

• HP 15 NOtebook PC: Cpu Spikes on multiplayer Battlefield 3 (new laptop)

  I bought new laptop yesterday his hp 15 with core i5 5200u, Geforce 820 m 2 GB, 4 GB of ram...

  I played solo BF3 it works very well at 40-45 fps at medium settings but when I play multiplayer peaks of CPU and random gives zero fps...

  WHAT I TRIED

  • like his new laptop is dust in it, so no need to clean
  • 4 GB of ram is enough, because I also ran bf3 MP on 2 GB
  • tried to change all the parameters of LOW, ultra, high average and other options
  • tried to reinstall the game 3times
  • tried to reinstall the bios and graphics driver

  PLEASE ME SAY WHAT I HAVE JOANIE DO ABOUT IT NOW

  Thanks for help but I solved it by running game like WIndows XP mode

• CPU spikes 80% earlier at 10:45 on the PROD Server

  Hi all

  11.2.0.1

  AIX 6.1

  
  

  Our systems administrator monitors daily using CPU/IO/MEMORY of our PROD server to the level of the BONE.

  It announced today that there is a peak of 80% processor use earlier to our Production database server.

  My boss asked me to study what Oracle user/program/process is causing this "peak".

  There the database views performance that I can choose to give this info on time?

  
  

  
  

  Thank you very much

  
  

  
  

  zxy
  

  
  

  > Given the above example, I want to get the (top CPU consuming sql) report at 10:43 - 10:45 July 30, 2013. Happened yesterday.

  Is this possible?

  Run state of ASHES for that interval.

  SQL > @? / rdbms/admin/ashrpt

  ...

  Enter the value for report_type: text

  ....

  Enter the value of begin_time: 30/07/13 10:40

  ...

  Enter the duration value: 10

  ...

  Enter the value of report_name: [Enter]

  ...

  Then look at the report.

• Identify the SVCHost service with high CPU usage

  I am wanting to know how to connect to the CPU for service usage.

  I have a Server 2008 R2 that has a CPU spike randomly, once during a period of 24 to 36 hours. I am trying to identify what is causing this CPU spike solve problems more far.

  With the help of Process Explorer and performance monitor, I identified as "SVCHost (netsvcs)", which contains about twelve different departments within the svchost process. I tried to use "Process Explorer", but so far I could not catch the process while it actually is maxing out the CPU.

  Any suggestions on the monitoring of individual services?

  Hi Marvin,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that the problem with the high utilization of the processor on the computer.

  I can understand the inconvenience that you have experienced and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• My PC spikes to 100% cpu

  My pc on 100% cpu spikes, I checked my task manager but at the top of the list is only google chrome takes up to 500 k Ko, sometimes I open a game which takes 1 KB mill, but it's okay if I opened the game or not his claws still at 100% I got intel xeon 4-core pc with geforce 4 graphics GB 16 GB of ram and more powerful avast first anti virus prog.

  Original title: CPU

  Hi Kibertrons,

  Thanks for the reply with the status of the issue.

  Here in this situation, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you solve common problems with Windows.

  Follow the steps to run the Troubleshooter:

  (a) press Windows + W on the keyboard.
  (b) type Troubleshooting in the search box and press ENTER.
  (c) select Troubleshooting. Click view all , and then select System Maintenance.
  (d) click Next and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This will help you to determine which third party/PPP program causing this problem (it will determine if there any other program/third-party application another Chrome is causing this issue).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Using too much CPU only when loading the network

  When FF works closely with the network (wired or wireless) card for access to the network, CPU utilization spikes in way more than 70% and he stayed there until the page loading process finishes web.
  After the upload is complete, the CPU usage remains somewhere between 5-10%.

  When I look at clips youtube 1080 p, where FF is duty next buffer part of this clip I watch, new CPU use peaks above 70% with the flash plugin and gives a total of a 100% of cpu for a few moments and use which make this clip to stop playing or to frame bad times, and ties.

  I have been activated in about: config webgl acceleration to activate the force and that much improve the initial problem, then I activated gfx.direct2D - activated force and also to improve the problem remaining.
  I also disable the safe_mode parameter file adobe flash config protectedmode = 0.

  I have to mention that the initial problem was way to bad ... 
  

  Now I get to point when I don't know what to do so that FF does not use much CPU loading pages.
  As you can see I use to publish this version of Nightly 64 bit (I think it's the 64-bit version...) which is much more better and I would like to read youtube 1080 p clip normally, after that I have wait a few moments to buffer, before starting to play.
  Version 32 bit FF won't let me watch YouTube without framing hurt when the clip is buffered.

  I was monitoring the Task Manager and all the processes listed... and there, I can't blame antivirus or firewall to the peaks of the processor. Also if I do the rest of the network traffic, as well as inside the network custom CPU even file copy flinch.

  Can someone help or give an opinion on what setting to do, so I can eliminate these spikes?

  Thanks in advance!

  Problem solved partially:

  I have observed that the CPU spikes occur not only while I use FF or mozilla nightly, but on all web browsers (Chrome, IE, Opera, etc) that I have used, while these browsers accessing the network.

  Uninstalling the firewall of the solution of the AV portion has helped a lot and by also disabling the bed in the firewall solution of W7, but for long term use, this isn't the right answer (for my at least). Without any firewall FF work or installed works like a charm, while the CPU usage is increased at a decent level of 50% max (total tasks and running services)!

  Anyway, as I said earlier, my pc without any firewall operation is not a good think to do, so I'll replace my computer with a faster, or I'm going to overclock it at a level that zapping INTERNET and navigation will not infringe too much on the performance of the system, or... I live whit it and I accept the limitations...

  Perhaps, in the development of the FF, programmers will keep in mind that not everyone on this planet has powerful processors - and... give a few options... to decrease the CPU at acceptable levels, event, even if they use the firewall solutions that violate on the CPU while FF is buffering of data across the network.

  I should also mention that Mozilla nightly (64-bit) and FF, are always better then IE - in my opinion - which is.

• Windows Update / SvcHost.exe 100% Cpu in the Task Manager

  This I know is not new to too many of us. Again - it's November 2013 and I would like to know how it happened AND what to do to fix it! Since 1997, I've built a lot of computers. I've never had this problem occur up to this relocation. Have reinstalled XP for XPSP3 several times. Don't waste time questioning my knowledge. Idem: components, motherboard, memory, nothing has CHANGED. The only thing that is different IS - when I finished installing Windows XP with Windows XPSP3 - tested the functionality - fast as * - magazine 'OBSERVER of EVENTS' - no problem, constantly check the CPU usage - low. My next step to activate Windows update to get updates to secure my system. Of course, the CPU spikes at 100% - due to a service request host CPU! I have to say - IF the meter would have a parameter to 200% - I have no doubt she would be higher than 100%. Even if I am sure of the rightness of my process to install the OS (once I've done several times over the years), I decided since I have not loaded any other thing - I format the drive (Nov 19) and start all over again. I'm sitting here today, with a computer case with components of audited operation, with a properly installed OS, motherboard drivers installed - do anything else and I can't do windows updates. Note: the first attempt install (17 Nov) - I tried the advice on Microsoft sites, the fix it systematic, installation recommended a version of net framework without result. There are also other tips to run a routine (don't ask--I do not dig up these data) in 'safe' mode which also failed to remedy. Frankly, I rarely use advice of experts even out there, but I decided that if it worked or not - I wanted a new facility, one last time to have a computer working properly that I built myself and gift. I'm getting old - at a time of my life when you start to reduce their material possessions. How is it possible that someone can do something of so many times with the certainty of having this problem and read both of are amazed with this? And spare me the absurdity of the verification of malware, viruses, bad drivers. This computer did not have any exposure to having these problems! We can safely assume is not a problem with hardware - even working properly - as much with this same question described the components that are very different. My deduction is: something is wrong in the Center Microsoft update or Windows update, I tried both! I believe (leaving aside the suggestions of some of the shenanigans) too trying to pass - after all the updates about 120 give or take a little number of. In any case - if there is no assistance 'out there' to answer a customer to Microsoft who bought Windows3.1; Windows 95; Windows 98; Millennia-old Windows; Windows Xp Windows Vista on my wife's computer. Windows 7 on my build recent just to enjoy the music - I would like to than the courtesy to get a solution to this problem. It seems very simple to me someone at Microsoft to round the most important security updates - onto a disk (compressed - many of us have a big hard drives and WinZip) and provide them with we ONLY CHARGE for POSTAGE - OK, OK adds a dollar or two. Leave aside the patches for patches. You know what it takes. The purchase of new hardware or OS systems is out of the question WHY? Because either we cannot it and above all - WE HERE ARE STANDING BY a product Microsoft WE believe! Try to make it in time for Christmas - he will do much for the image of Microsoft. Have a happy Thanksgiving to all!

  This I know is not new to too many of us. Again - it's November 2013 and I would like to know how it happened AND what to do to fix it! Since 1997, I've built a lot of computers. I've never had this problem occur up to this relocation. Have reinstalled XP for XPSP3 several times. Don't waste time questioning my knowledge. Idem: components, motherboard, memory, nothing has CHANGED. The only thing that is different IS - when I finished installing Windows XP with Windows XPSP3 - tested the functionality - fast as * - magazine 'OBSERVER of EVENTS' - no problem, constantly check the CPU usage - low. My next step to activate Windows update to get updates to secure my system. Of course, the CPU spikes at 100% - due to a service request host CPU! I have to say - IF the meter would have a parameter to 200% - I have no doubt she would be higher than 100%. Even if I am sure of the rightness of my process to install the OS (once I've done several times over the years), I decided since I have not loaded any other thing - I format the drive (Nov 19) and start all over again. I'm sitting here today, with a computer case with components of audited operation, with a properly installed OS, motherboard drivers installed - do anything else and I can't do windows updates. Note: the first attempt install (17 Nov) - I tried the advice on Microsoft sites, the fix it systematic, installation recommended a version of net framework without result. There are also other tips to run a routine (don't ask--I do not dig up these data) in 'safe' mode which also failed to remedy. Frankly, I rarely use advice of experts even out there, but I decided that if it worked or not - I wanted a new facility, one last time to have a computer working properly that I built myself and gift. I'm getting old - at a time of my life when you start to reduce their material possessions. How is it possible that someone can do something of so many times with the certainty of having this problem and read both of are amazed with this? And spare me the absurdity of the verification of malware, viruses, bad drivers. This computer did not have any exposure to having these problems! We can safely assume is not a problem with hardware - even working properly - as much with this same question described the components that are very different. My deduction is: something is wrong in the Center Microsoft update or Windows update, I tried both! I believe (leaving aside the suggestions of some of the shenanigans) too trying to pass - after all the updates about 120 give or take a little number of. In any case - if there is no assistance 'out there' to answer a customer to Microsoft who bought Windows3.1; Windows 95; Windows 98; Millennia-old Windows; Windows Xp Windows Vista on my wife's computer. Windows 7 on my build recent just to enjoy the music - I would like to than the courtesy to get a solution to this problem. It seems very simple to me someone at Microsoft to round the most important security updates - onto a disk (compressed - many of us have a big hard drives and WinZip) and provide them with we ONLY CHARGE for POSTAGE - OK, OK adds a dollar or two. Leave aside the patches for patches. You know what it takes. The purchase of new hardware or OS systems is out of the question WHY? Because either we cannot it and above all - WE HERE ARE STANDING BY a product Microsoft WE believe! Try to make it in time for Christmas - he will do much for the image of Microsoft. Have a happy Thanksgiving to all!

  Hi Joseph,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates.

  Check mark the option at the bottom to turn off the automatic updates.

  Click apply/OK, and then restart.

  Svchost consumes always 100% cycles CPU?

  If this is the case, follow these steps.

  Click Start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  It may be present in C:\WINDOWS\system32, but if you can see it, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see qmgr.dll in C:\WINDOWS\system32 you can change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.
  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.