'service mgmt-vmware restart' in an installation script.

Similar Questions

• service mgmt-vmware restart

  We need regularly to restart the management console service of the following on the command line

  Service mgmt-vmware restart

  Before that, I checked that virtual machines are not configured to automatically put in power when this command is executed (by entering the virtual center server and clicking ESX Server, and then click configuration/VirtualMachine start stop and check that it is disabled)

  I don't want that to carry out the VMs and ESX Server - is there anything else I need to check?

  I read one thread that says THAT HA should be disabled? Is this correct?

  http://www.geekshangout.com/?q=node/8

  You should have no problem, just comment the KB article below

  http://KB.VMware.com/kb/1003631

• Service mgmt-vmware restart issue in ESXi 5.0

  Hi Techies,

  I am able to restart management services using this command "mgmt-vmware restart service" on ESX, but I couldn't do this on ESXi, I used to get the service that is not found, even I thave tryied this way also "/etc/init.d/mgmt-vmware restart", but I can reboot the network loging in the DCUI. Here, my doubt is that is above the order was withdrawn in Server ESXi or how? some body can clarify my doubts.

  Thank you

  This command will restart all right service? as pass, vpxa and watchdong and many others

  Yes

  .. .it will be intrupt anything in a network

  None

• Service mgmt-vmware restart causes the virtual machine downtime

  I'm looking in the configuration of SNMP on our ESX for Solarwinds alert guests, and is the last step I have to restart the service mgmt-vmware.

  I looked around online and have been unable to find confirmation that it will not have all the time with the virtual machines running on those hosts, as production machines.

  
  We run ESX v4.1.0

  Thanks in advance.

  Hello and welcome to the Forums!

  Restart management agents will have no negative impact on your guests.

• Impossible to restart the service mgmt-vmware

  Hi all

  Noob here and I am strugling just restart this service.

  Basically I can't connect to a stand-alone ESXi 4 host via vSphere. I get an error message; vSphere Client cannot connect to... a unknown connection error has occurred.

  I've read here to SSH inside and resart service mgmt-vmware.

  But when I Putty as root and try to run the following; service mgmt-vmware restart

  I get this; Service: not found.

  Need help please, what am I doing wrong?

  Hi and welcome to the forum,

  Watch this.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003490

  Frank

• Mgmt-vmware restart-> "Host Agent Watchdog" has no!

  Hi all

  I had the problem that an ESX Server was red and I couldn't control this vCenter ESX host more.

  I did the following things:

  ps - ef | grep vmware - pass

  Kill - 9 & lt; ID of process & gt;

  service mgmt-vmware restart

  now, I've seen the following thing:

  Stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog VMware ESX Server Host Agent

  Starting VMware ESX Server management services:

  VMware ESX Server Host Agent is already running

  Availability report startup (background)

  I would like to manage my VM in the vCenter, but for the moment I could not do that...

  Any ideas? Workarrounds?

  OK, enter a start, look at your var/log/vmware/hostd.log.  How far does go?  You can attach to a post as well.

  -KjB

  VMware vExpert

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• «A fatal problem occurred, stopping the service of VMware VirtualCenter.»

  Although I doubt it's related, after the problems in this number - and do work very well the the rest of the day, I walked into the Office to another topic!  Maybe it's related but I do not know...

  As I said, after you complete the migration, things seemed fine for the rest of the day.  This morning, I can't even on the server via vSphere.  For some reason, the service was not working and I can't restart.  Here is my error in the Windows Event Viewer...

  Error:
  
  

  Log name: Application

  Source: VMware VirtualCenter Server

  Date: 28-09-2010 08:15:10

  Event ID: 1000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: VCENTER1. HOMENET.local

  Description:

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  An unrecoverable problem has occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [SQL Native Client] [SQL Server] log transactions for the database"VIM_VCDB"is full." To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"is returned when you run the SQL" UPDATE VPX_DATASTORE (ROWLOCK) SET NAME =?, STORAGE_URL =?, CAPACITY =?, free_space =?, TYPE =?, DATACENTER_ID =?, IORM_ENABLED =?, IORM_CONGESTION_THRESHOLD =? WHERE ID =? »

  the message resource is present, but the message is not in the string/message table

  The event XML:

  " < event xmlns =" http://schemas.Microsoft.com/win/2004/08/events/event "> "

  <>System

  < name of the provider = "VMware VirtualCenter Server" / >

  < qualifiers EventID = '0' > 1000 < / EventID >

  < niv.2 > < / level >

  < task > 0 < / task >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2010-09 - 28 T 12: 15:10.000000000Z "/ >"

  < EventRecordID > 3048 < / EventRecordID >

  Application of < channel > < / Channel >

  VCENTER1 < computer >. HOMENET.local < / computer >

  < security / >

  < / system >

  < EventData >

  data <>a fatal problem occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [SQL Native Client] [SQL Server] log transactions for the database"VIM_VCDB"is full." To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"is returned when you run the SQL" UPDATE VPX_DATASTORE (ROWLOCK) SET NAME =?, STORAGE_URL =?, CAPACITY =?, free_space =?, TYPE =?, DATACENTER_ID =?, IORM_ENABLED =?, IORM_CONGESTION_THRESHOLD =? WHERE ID =? "< / data >

  < / EventData >

  < / event >

  Any ideas?

  This is your on your VCDB (Virtual Center Database).  Talk to your DBA and let him look at the logs of transactions for the DB instance in question.

  I would suggest also go full recovery simple

  http://KB.VMware.com/kb/1003980

• Error message from Windows XP Pro SP3 1720 Windows installation Script required

  Original title: WINDOWS XP PROFESSIONAL VERSION 2002 SERVICE PACK 3-__ERROR MESSAGE 1720 FOR WINDOWS - installation SCRIPT REQUIRED FOR INSTALL NOT running.

  I get error message 1720 whenever I try to install an Internet card mobile broadband (MC760) at Virgin Mobile

  Hello Ivpg1963,

  I saw a suggestion in another forum that said to remove drivers Virgin Mobile via Add/Remove programs.
  Then, remove the Novatel directory in Program Files. They claimed that remove the directory was the key.

  Then add the drivers of Windows XP to return to the large map Strip MC760.

  Please reply back and let us know if this can help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• "SENDING" CNEXT service does not restart

  We use CNEXT/AR to send on that pathology reports "sending" service does not restart, we tried to restart the server to re - establish connectivity and restart manually.  We get an error of disconnection, but one or two reports will be sent.  Anyone had any experience with this kind of problem?  All information is useful

  Thank you

  Michelle

  You can ask C/NET Solutions, which claims to offer "great customer."

  Start here--> http://www.askcnet.org/support/

• Cannot start the services automatically after restarting the computer and also unable to define themes.

  Original title: My Services do not start automatically

  I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.

  More info, please ask.

  Thanks in advance

  In fact, the problem persisted due to the fact that:

  1 'Windows Cache of police service' was running, so I disabled it.

  2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.

  After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.

  For those who need help, these are the instructions.

  Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.

  Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.

  Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".

  After all this, your computer must be at its best.

  I hope this helps someone.

  Thanks for all the help.

• Oracle recommends from services with the account of the installation. Can someone please explain why?

  Or is it a thing of the past and not needed in the new versions?

  Thank you
  Ted.

  You don't need to start services with the account of the installation, it could be several cases, the local system or a domain account.

  See you soon

  John

• How to create an installation script to support objects

  Guys please help with this I have been through Google all day but with no luck, I moved that the workspace to the production environment and application as well, but the thing is the tables using the app has not been moved with the application. On the assumption of the objects in the application page, I selected Yes in the include supporting objects option. Does anyone know how I could create an installation script to create the tables as well. ?

  rhisingh,

  Read documentation Application Deployment

  See also related book ORACLE APPLICATION EXPRESS SUPPORTING OBJECTS

• Revenant (installation of the Service Pack) Just restarts again and again

  Recently tried to install SP2 from Windows Update.
  Unfortunately, someone either shut down the computer during the installation or the laptop lost power etc.

  Now, I get the message "service not installed pack - reverting" formidable again and again and again. The system keeps restarting itself! I tried the standard startup repair, and there is no system restore points.

  I even tried a sfc/scannow, but it shows a repair operation is in progress, and I have to reboot first.

  Help?

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner