"SENDING" CNEXT service does not restart

Similar Questions

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• HP 2000-2d29DX Notebook PC: intel rst service does not work

  Recently, I noticed the icon in the lower right of the screen showling the intel rst service does not work. In the past, I saw the icon, but it would correct themselves after a few minutes. A week ago I downloaded the Speedy PC Pro registry cleaner. Don't know weather or not to download that has something to do with the service of the RST. Help, please.

  Hi @aick,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 2000 and the Intel Rapid Storage Technology Service is not running. Click the windows services key type.

  Verify your Intel Rapid Storage Technology Service is not on the manual and the service has been started. The service should be automatic and started. Once these settings are correct, restart the laptop.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.
  
  Thank you.

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• Equium A60 does not restart

  Hello

  My Equium A60 which I had since almost two years earlier this week crashed and does not restart. I met previous problems of slowness and the computer laptop closing (which I believe was down to heat), but it's much more serious.

  All that happens when I pass on is a black screen is displayed, as if the monitor does not work, and then after a few minutes it turns off, there is nothing really to go. Is there anyway I can record what's on my hard drive or who lost? Any help would be appreciated.

  Thank you

  You can try to connect the HARD drive to another laptop or desktop as an external device using the USB HDD box. The disc HARD should be recognized automatically and you can copy all of your files.

  Of course, this is possible if the HARD drive is not defective. I did several times with my old Satellite 1900 HDD. No problem at all.

  On your device, I can tell you just follow: after pressing the power button / stop if there is no activity (HDD led, display, the cooling fan noise) I guess the unit must be controlled by the service.

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• XP does not restart in safe mode or any mode.

  clicked on "Download updates and shutdown". Morning then tried to reboot and XP does not restart in any mode. Continues to rerun initial time and again, go to the 'mode' screen for 25 seconds and then starts again.

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  And then, if your computer is still infested with hijackware, maybe the updates did not cause the problem? =>

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/fa39a531-b865-4de5-a0fd-2ddc075aacff

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Print Spooler service does not

  All of a sudden my computer says print spooler service does not.  There are no printer.  What in the world happened and how to I fix that?

  Hi Mark,

  Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.

  Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

  I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Diagnosis of last run time: 16/05/12 16:09:47

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  warn	HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
  warn	FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Thanks for your attempt to solve my problem.

  Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

• Printer error print spooler service does not? Why not

  I have a problem with my printer .  I went to use this boy was that cannot use a misstake... go Control Panel /printer .and see I have no printer and you can't print at all.  I tried to instwith a CDerror the Print Spooler service does not... I need help big time what should I do? 

  HELP Florida Irving

  Hello

  Try the steps below and check if they help to resolve the issue.

  Method 1:

  Check the link below and try the troubleshooting steps provided to solve the problems with the printer in Windows.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the steps in the link above do not help, try to manually restart the Printer Spooler service.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) on the general tab, next to startup type, make sure that automatic is selected.

  (e) if the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation

• Failed to load printer - clicking Add indicates a Printer Spooler Service does not.

  Upgrade Windows XP to SP3 last night.  Now all in printers and faxes has disappeared.  Click on add a printer indicates the Spooler Service does not.   Went in and forced a start; Add the said printer still does not.

  Deleted old printer drivers (Lexmark).  Downloaded updated.  Execution of Lexmark is set up; said the spooler does not (yet), tries to start.  Then, the installation fails saying "No. valid Ports for the driver.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):

  If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself.  If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757).  The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  The sc config step 16 command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Printer Spooler service does not

  No apparent reason, I can print is no longer.  In Panel, printers and fax machines, no printer is listed despite the fact that there were at least two.  If I try to add a printer, I get the message Printer Spooler service does not. I was on the Microsoft site and loaded a convenience store who confirmed that the Printer Spooler service did not work but cannot fix it.  Not very useful at all.  Can anyone help.  I saw that a lot of old messages about this problem so it is not unique, but I'm really really stuck.

  You can start the print spooler by using different techniques, which one is suggested by Saurabh Joshi.

  Unfortunately, restart the print spooler generally fails to resolve the problem that caused the print spooler to stop in the first place.

  Apart from malware (and you'd be well advised to scan your system to update MalwareBytes Anti-Malware and SUPERAntiSpyware), are two likely reasons that your print spooler stops printer driver has corrupted and (b) corrupt print job stuck in the print queue.

  Start by removing the print queue.  With the print spooler stopped, go to C:\Windows\system32\spool\PRINTERS and delete the contents of the folder.  Do not delete the folder ...\PRINTERS himself.

  Then, clean and reinstall the drivers for your printer.  See the instructions at http://www.coribright.com/windows/Article_One.htm
  If you have a Lexmark printer, see this article for special instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm