service mgmt-vmware restart

Similar Questions

• 'service mgmt-vmware restart' in an installation script.

  Hello

  like many propably you do, I do 'service mgmt-vmware restart' in a script installation.

  I need this because I want to use vmware-vim-cmd ommands.

  When the mgmt-vmware restart 'service' is executed, the complete installation stops and is right there.

  When I do a "service mgmt-vmware restart' manully of a session SSH, no problems.

  When I do a "service mgmt-vmware restart' to a console session (HP Iloé) the problem becomes clearer.

  During the restart, the screen moves the "to open a session to the ESX Server...". Press ALT - F1 etc."- screen

  When I press ALT - F1 I re - enter my session again and see the result of the command "service mgmt-vmware restart '.

  But clearly it's killing my script because it cannot continue.

  Someone at - it ideas?

  BTW: ESX 3.5 U3

  Thank you and best regards,

  Harold

  Other users I know orders vmkernel put in a file to run at startup and not during the kickstart himself.  Put all your commands in a script and have /etc/rc.local run at startup and then remove the rc.local.

  -KjB

  VMware vExpert

• Service mgmt-vmware restart issue in ESXi 5.0

  Hi Techies,

  I am able to restart management services using this command "mgmt-vmware restart service" on ESX, but I couldn't do this on ESXi, I used to get the service that is not found, even I thave tryied this way also "/etc/init.d/mgmt-vmware restart", but I can reboot the network loging in the DCUI. Here, my doubt is that is above the order was withdrawn in Server ESXi or how? some body can clarify my doubts.

  Thank you

  This command will restart all right service? as pass, vpxa and watchdong and many others

  Yes

  .. .it will be intrupt anything in a network

  None

• Service mgmt-vmware restart causes the virtual machine downtime

  I'm looking in the configuration of SNMP on our ESX for Solarwinds alert guests, and is the last step I have to restart the service mgmt-vmware.

  I looked around online and have been unable to find confirmation that it will not have all the time with the virtual machines running on those hosts, as production machines.

  
  We run ESX v4.1.0

  Thanks in advance.

  Hello and welcome to the Forums!

  Restart management agents will have no negative impact on your guests.

• Impossible to restart the service mgmt-vmware

  Hi all

  Noob here and I am strugling just restart this service.

  Basically I can't connect to a stand-alone ESXi 4 host via vSphere. I get an error message; vSphere Client cannot connect to... a unknown connection error has occurred.

  I've read here to SSH inside and resart service mgmt-vmware.

  But when I Putty as root and try to run the following; service mgmt-vmware restart

  I get this; Service: not found.

  Need help please, what am I doing wrong?

  Hi and welcome to the forum,

  Watch this.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003490

  Frank

• Mgmt-vmware restart-> "Host Agent Watchdog" has no!

  Hi all

  I had the problem that an ESX Server was red and I couldn't control this vCenter ESX host more.

  I did the following things:

  ps - ef | grep vmware - pass

  Kill - 9 & lt; ID of process & gt;

  service mgmt-vmware restart

  now, I've seen the following thing:

  Stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog VMware ESX Server Host Agent

  Starting VMware ESX Server management services:

  VMware ESX Server Host Agent is already running

  Availability report startup (background)

  I would like to manage my VM in the vCenter, but for the moment I could not do that...

  Any ideas? Workarrounds?

  OK, enter a start, look at your var/log/vmware/hostd.log.  How far does go?  You can attach to a post as well.

  -KjB

  VMware vExpert

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• «A fatal problem occurred, stopping the service of VMware VirtualCenter.»

  Although I doubt it's related, after the problems in this number - and do work very well the the rest of the day, I walked into the Office to another topic!  Maybe it's related but I do not know...

  As I said, after you complete the migration, things seemed fine for the rest of the day.  This morning, I can't even on the server via vSphere.  For some reason, the service was not working and I can't restart.  Here is my error in the Windows Event Viewer...

  Error:
  
  

  Log name: Application

  Source: VMware VirtualCenter Server

  Date: 28-09-2010 08:15:10

  Event ID: 1000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: VCENTER1. HOMENET.local

  Description:

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  An unrecoverable problem has occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [SQL Native Client] [SQL Server] log transactions for the database"VIM_VCDB"is full." To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"is returned when you run the SQL" UPDATE VPX_DATASTORE (ROWLOCK) SET NAME =?, STORAGE_URL =?, CAPACITY =?, free_space =?, TYPE =?, DATACENTER_ID =?, IORM_ENABLED =?, IORM_CONGESTION_THRESHOLD =? WHERE ID =? »

  the message resource is present, but the message is not in the string/message table

  The event XML:

  " < event xmlns =" http://schemas.Microsoft.com/win/2004/08/events/event "> "

  <>System

  < name of the provider = "VMware VirtualCenter Server" / >

  < qualifiers EventID = '0' > 1000 < / EventID >

  < niv.2 > < / level >

  < task > 0 < / task >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2010-09 - 28 T 12: 15:10.000000000Z "/ >"

  < EventRecordID > 3048 < / EventRecordID >

  Application of < channel > < / Channel >

  VCENTER1 < computer >. HOMENET.local < / computer >

  < security / >

  < / system >

  < EventData >

  data <>a fatal problem occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [SQL Native Client] [SQL Server] log transactions for the database"VIM_VCDB"is full." To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"is returned when you run the SQL" UPDATE VPX_DATASTORE (ROWLOCK) SET NAME =?, STORAGE_URL =?, CAPACITY =?, free_space =?, TYPE =?, DATACENTER_ID =?, IORM_ENABLED =?, IORM_CONGESTION_THRESHOLD =? WHERE ID =? "< / data >

  < / EventData >

  < / event >

  Any ideas?

  This is your on your VCDB (Virtual Center Database).  Talk to your DBA and let him look at the logs of transactions for the DB instance in question.

  I would suggest also go full recovery simple

  http://KB.VMware.com/kb/1003980

• "SENDING" CNEXT service does not restart

  We use CNEXT/AR to send on that pathology reports "sending" service does not restart, we tried to restart the server to re - establish connectivity and restart manually.  We get an error of disconnection, but one or two reports will be sent.  Anyone had any experience with this kind of problem?  All information is useful

  Thank you

  Michelle

  You can ask C/NET Solutions, which claims to offer "great customer."

  Start here--> http://www.askcnet.org/support/

• Cannot start the services automatically after restarting the computer and also unable to define themes.

  Original title: My Services do not start automatically

  I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.

  More info, please ask.

  Thanks in advance

  In fact, the problem persisted due to the fact that:

  1 'Windows Cache of police service' was running, so I disabled it.

  2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.

  After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.

  For those who need help, these are the instructions.

  Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.

  Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.

  Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".

  After all this, your computer must be at its best.

  I hope this helps someone.

  Thanks for all the help.

• Service Pck 2 restarts my computer does not start!

  I downloaded the Service Pack 2 of Vista on my HP laptop and when he arrived at stage 3 the computer keeps restarting and won't load. He remains at 0% and restarts. Nothing works I even tried to reboot in safe mode! Please someone help!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Revenant (installation of the Service Pack) Just restarts again and again

  Recently tried to install SP2 from Windows Update.
  Unfortunately, someone either shut down the computer during the installation or the laptop lost power etc.

  Now, I get the message "service not installed pack - reverting" formidable again and again and again. The system keeps restarting itself! I tried the standard startup repair, and there is no system restore points.

  I even tried a sfc/scannow, but it shows a repair operation is in progress, and I have to reboot first.

  Help?

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer Spooler service will not restart error 1068

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  This error is probably due to the fact that you had (have) a Lexmark (or Dell Lexmark brand) printer installed.  Some Lexmark printers install a service and make the print service spooler depend on the Lexmark service.  So, if something happens to the Lexmark service, the print spooler cannot start.

  The first thing to do is to ensure that the print spooler dependencies are correct.  Open a command prompt window (start > run > cmd > OK) and type the following line and press ENTER.  Note that there is no space before the = but there is a space after it.

  dependent on the spooler of sc config = RPCSS

  Now clean the printing system: However before cleaning things up, on general principles, you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  Do not omit step 4.

• I tried to use windows help for a start/stop problem I had with xp 64. He said using msconfig and uncheck load system services, and then restart. Now the services restart.

  I use a laptop Dell Inspiron 1501 with Windows XP 64 installed.

  It is only the first step in debugging your problem.  If from disabled services make your problem go away, then you must click on the 'Services' tab and allow some of the services at a time and restart until you find the service that is causing your problem.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW