Service & OS detection

Similar Questions

• Unable to connect mobile to Satellite P300: service failure detection

  II manage with the Bluetooth feature on my C905 mobile.
  It is connected to my bluetooth hands free in my car without problem, but it does not connect to my laptop toshiba satellite P300.

  The laptop computer and the mobile phone will locate each other, but when I try to authenticate I have a "service outage detection" warning every time. my old phone connected without issue to my laptop, and I put all the phone settings according to the user's guide.

  Any suggestion would be appreciated.

  I read another post here that says to change ports... but I have no idea how to do

  instructions step by step would be great, if possible

  Thank you

  Kane.

  Hello Kane

  Have you installed latest Toshiba BT stack?
  I have the same model of laptop and I tested with my new LG BL40 newchocolate.
  It works perfectly. The war of any configuration made in only 2 minutes.

• Cannot print documents get error: interactive services dialog detection

  I have problems printing of documents.  The message on the screen indicates the services dialog detection interactive microsoft visual c ++ debug library

  Hello

  Try to perform the steps mentioned below that can help you in the matter of fixing.

   

  Method 1: Please refer to the below links which could help you to fix the problem.   Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Place the computer in a clean boot State and see if the problem is resolved:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  Hope this information helps.

• INTERACTIVE SERVICES DIALOG DETECTION

  I'M WORRIED ABOUT "INTERACTIVE SERVICES DIALOG DETECTION" IT ALWAYS APPEAR ON MY LAPTOP SCREEN.

  I'M AFRAID THAT THIS MAY BE A VIRUS. PLEASE HELP ME HOW TO REMOVE THIS THING.

  CiTi

  Hello

  See the solution proposed at the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/disable-the-interactive-services-dialog-detection/ca139ba9-c96c-49af-bc09-83abc26f3f5d

  Kind regards

  DP - K

• How to disable interactive services dialog detection

  How to disable interactive services dialog detection

  Hi Neva,

  Follow the steps below to change the notification of your computer settings and check if it helps:

  un) Click Start , type services.msc in the search box and press ENTER.

  b) locate the Interactive Services Detection service.

  c) right click on the service and stop it .

  Note: Interactive Services detection allows notification of user input for interactive services user, which enables access to dialogs created by interactive services when they appear. If this service is stopped, notifications of new interactive service dialogs will no longer function and there may be no access to the interactive services dialog boxes. If this service is disabled, the notifications of and access to the new interactive service dialogs will no longer function.

  Answer please if you have any questions.

• "previous installation of host services has detected the error.

  I posted this in the beta forum and not answer. I'll try here... Here is the link to the beta forum: http://communities.vmware.com/thread/278405

  Try to uninstall a component, vShield, in this example, the portion of Port Group isolation. I get the following error:

  "previous installation of host services has detected the error.

  ESXi V4.1

  VMkernel is on a dvSwitch

  Thank you

  Mike

  THIS ONLY if APPLIES to vShield Zones / App vShield

  One last thing, you mentioned this announcement on the beta site which tells me that you had a pre - GA on areas/App version installed. If that were the case, or maybe a previous installation of App/areas (Beta) had an installation/uninstallation failed, then do this procedure to clean the host of all the previous components.

  1. remove the vmservice-vswitch created during installation (assuming that there is no other device that uses this vswitch)

  2 remove the address 169.x.x.x, given the Net.DVFilterBindIpAddress of the host property.

  Detailed procedure:

  1. go through the uninstall process each time as

  possible (if one of the components to show as it is installed). Then go to the

  next steps.

  2. search for the vmservice-vswitch and delete

  it. it is a vSwitch without physical adapters service that was created

  during the installation. It will have 2 groups of ports, one called

  vmservice-vmknic-pg and the other vmservice vsheild pg.

  3. Select the ESX host on the left hand side

  tree on the right hand click the Configuration tab pane and click

  Advanced settings of the software. In the Advaced search page settings

  the Net section, then select it. Scroll through all the

  way down and then make your way up until you find

  Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and

  Click OK.

  4. installation of APP vShield vShield Zones should now work.

• connection statistics is unknown, the service to detect this State is disabled. How can I solve this problem?

  network connection status unkwown

  Check if the following services (responsible for the internet connection) are the value automatic and started.

  ·         DNS client

  ·         DHCP client

  To do this:

  1. click on start

  2. type services.msc in the search bar

  3. open services.msc

  4. search for the above mentioned services and start the services if they are arrested.

  You can also run the tool the Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair. More information in the link: http://windows.microsoft.com/en-US/windows-vista/The-doctor-is-in-Using-Network-Diagnostics-in-Windows-Vista

• Detection of interactive services - runtime error dialog

  According to me, it's malware, and it also prevents me from download windows updates to clean. The error is:

  getdrivelayout create file fail! The system cannot find the specified file

  and the path is program files\VIA\RAID\vialogsv.exe

  Please can you advise a fix

  Hi RobPynor,

  ·         When exactly do you get the next "interactive services dialog detection of errors - runtime error '?

  ·         How long have you been faced with this problem?

  I suggest that you put the computer in a clean boot state and see if the problem is resolved.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Also download the Microsoft Safety Scanner to prevent your computer for any virus.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Make a backup of the data before you run Microsoft Security Monitor in order to avoid any loss of data.

  I hope this helps!

• disable the windows dialog detection interactive service

  Hi, I have an overview than opends Acrobat reader 9 program, but in a computer, I get the popup with the interactive service dialog box, even if I accept to see my document, it blocks several options of acrobat, for example, I do not have access to the printers, how can I avoid to start this interactive service?

  Thank you all!

  Hello

  Follow the steps below to disable interactive services dialog detection windows and check if the problem is solved or not.

  un) Click Start and type services.msc in the search boxhit enter.

  b) locate the Interactive Services Detection service.

  c) right click on the service and stop it .

  Note: Interactive Services detection allows notification of user input for interactive services user, which enables access to dialogs created by interactive services when they appear. If this service is stopped, notifications of new interactive service dialogs will no longer function and there may be no access to the interactive services dialog boxes. If this service is disabled, the notifications of and access to the new interactive service dialogs will no longer function.

  Hope that helps.

• How to install the 2007 Microsoft Office Suite Service Pack 3 (SP3) when the automatic update of windows fails?

  My PC tried to download and install the 2007 Microsoft Office Suite Service Pack 3 (SP3) every night when I turn off the PC, but it still fails. I tried to download it manually but it does not work and I even tried the Microsoft Fix It service to detect any problems but there is not.

  So, how can I download this software point?

  Hello

  1. are you able to correctly install the other updates?

  2. you receive any code/error message when the update installs?

  (a) you can check the status of updates on the Windows Update Web site or on the Microsoft Update Web site.

  (b) click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  
  Reference: you can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  If you have a problem only to install the Microsoft Office updates, I recommend you to ask your question in forum Microsoft Office assistance:

  Support for Microsoft Office Community Forums

  Hope the helps of information.

• detection of interactive dialogue SVC - version 2012

  What does the message "Interactive Services dialog Detection" and why should be enabled OR disabled?  the most recent message from 2008 - it's 2012 and the problem still persists / exists - when I click it, it opens an empty (but in light blue), noting everything what is the cause of the problem will show the problem but it is still empty. -what I learn or expect to learn from this message?

  Hello rjascottjr,

  Thanks for the reply. I have included a link below of MSDN explaining what this service and how it works. Please let us know if you encounter any problems or have any other questions.

  What is detection of Interactive Services and why is it flashing at me?

  http://blogs.msdn.com/b/patricka/archive/2010/04/27/what-is-interactive-services-detection-and-why-is-it-blinking-at-me.aspx

• How to remove Adminstative interactive services

  I can't remove services dialog ineractive

  Hello william frederickharrison,.

  I have included a link below on how to dsable interactive services dialog detection window, please let us know status.

  Microsoft Answers:

  Disable interactive services dialog detection window?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/disable-the-interactive-services-dialog-detection/ca139ba9-c96c-49af-bc09-83abc26f3f5d

• Cannot detect wireless connection

  I have a Samsung mobile phone, NP5505P7C

  I just reinstalled Windows 7 Ultimate x 64 and I turned on the WLAN service to detect my WiFi network, but it does not always detect it.

  Can someone help me with this?

  If you have used a Windows 7 DVD (or a downloaded ISO file) to reinstall Windows 7, then you will need to reinstall all drivers for your laptop hardware.  Click Start and type "Device Manager" (without the quotation marks) and then click on the link that is located.  There are probably a number of entries, display warning icons.

  "NP5505P7C" doesn't seem to be a valid Samsung product.  Maybe you have a NP550P7C.  The Samsung website we does not have drivers for this model, but the UK site--> http://www.samsung.com/uk/support/model/NP550P7C-S05UK

  Drivers for the wireless network card are there, but not only will you have to understand that many drivers is appropriate for your hardware, but I suspect you will need to download and install several other drivers as well.  I suggest you ask support Samsung how to know what your particular unit requires specific drivers.  Samsung can easily determine that your serial number or any other identifier on your laptop.

• Cannot install the update of video player on three Satellite Pro C850

  I have 3 Satellite Pro C850-A-10Z, A - 15V and A - 15 q
  They are all running Windows 7 64 bit

  They have all the Tempro messages recently received on an update of the video player
  Toshiba service Center detects an update, but it will not install on any of them - no error message given.

  I tried to install it manually by following the link Tempro and download
  11/02/15 5.3.49.124 video player

  The update runs, and then displays the message
  "cannot find our player in your system. Installation interrupted.

  I thought that the Toshiba service center was supposed to report updates.
  Nobody knows what could happen here?

  Hello

  Are all the three machines pre-installed with the original version of operating system that has been delivered with the machine?

• Re: HDD Protection utility has stopped working?

  I came just to look at the Toshiba PC Health Monitor yesterday and I saw that my HARD drive protection did not work. I clicked on the drive and all my functions are greyed out and I couldn't allow him once again.

  So I did some research on Google and saw that I'm not the only one having this problem I did what other people did and tried to install the HARD disk Protection software... once again. Well about half way through the installation process, I get the following error:

  * 2753.The error file 'startmenu.exe' is not marked for installation

  and you can click the 'okay' box that automatically closes the program. I don't know what to do now.

  I have a portable Satellite P755-S5269 I bought a week ago.

  Hello

  I studied a bit and it seems that the 2753 error file is not marked for installation appear under different applications so it s not related to the software Toshiba other apps but is generated from the Windows Service install detect old installation of software that cannot be removed.

  I recommend you download and install the Windows Installer Cleanup utility and remove all detected HDD Protection Utility versions.
  In addition, you can also try to clean the registry using the CCleaner.
  Then restart the laptop, download and run the HDD Protection Utility setup once more.