Service Pack installation problem

Similar Questions

• Disqualification - data on clients of the Service Pack; Installation problem

  Hello

  I managed to download and get the CD pack.

  I can see the projects in realization. But when I try the kickoff of the HAND - initialize data reference job I get the error "an error occurred creating parameters of working language [A] initialize: cannot load the process [A] initialization of the language settings (Code: 207, 103)"»

  I tried to perform the work within the Director and also in the Console of the server with the same message

  Any help much appreciated.

  Concerning

  
  SARB

  Hi Mike,.

  You probably have not imported the dxi fully. Did you get errors when importing the project? Have you extracted config.zip provided in the distribution on the existing config directory? If this isn't the case, then it will miss the widgets and gadgets.

  Also, if you want the off-field box settings language then you don't need to use the Initialize project.

  Kind regards

  Nick

• SP2 error: "the Service pack installation cannot continue.

  Hello

  Hope someone can help with this.

  When I try to install SP2 I get this message "the Service pack installation cannot continue - is missing one or more components of the system which requires service pack."

  My computer is a Dell Studio 1737 laptop came with Vista Premium 64 bit OS. Received 3 months ago.

  Last week, I got a blue screen while making a rescue disk (I know, it's ironic), computer was slow, so I tried to do the system restore. System Restore does not work (I installed SP2 in fact at the moment, no problem). Looked for the solution, only thing I could find was to re - install OS repair mode (upgrade).

  Found some info on VLite (knew, it has not been accepted by MS). Did the repair installation with VLite, added updates and drivers, took only some of the great language files. Load and run fine, ran all updates to windows. When I tried to install SP2, I got the "Service pack installation cannot continue - one or more components of the system that requires the service pack are missing. Looking for solutions, concluded the MS 'this may be due to the installation of VLite"only resolution is to re - install with OEM disc.

  If that's what I did, re-installed, (repair - upgrade), once again. Load and run fine, ran all updates to windows. When I tried to install SP2 I got the "Service pack installation cannot continue - is missing one or more components of the system which requires service pack"-NEW.

  I have:

  -tried several times

  -uninstalled VLite (of fat)

  -Disabled antivirus, Norton 360

  -Downloaded the standalone KB948465 - X 64

  -guarantees for KB955430 and all updates were installed

  -Ran "reset windows update components.

  -Re-installed "Windows updater.

  -We searched MS forum and Web site for help, can't find anything on the message of"missing components".

  -Ran "System tool" KB947821

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6001.22375

  Package, Version 5.0

  2009-06-02 23:00

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  Summary:

  Seconds executed: 1815

  No error detected

  Still won't install, get the same message.

  Can someone give any additional suggestions or a place to look for this problem.

  Other that this question, the computer is running great.

  Thanks for any help,

  Kind regards

  Dave

  Hi Dave,.

  It's here: http://support.microsoft.com/kb/968279

  Good luck!

  Cheers, Mohan | If your questions are answered, please come back and score the reply as an answer while others may use it.

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Where to find 'Data quality customer Data Services Pack Installation Guide'?

  Does anyone know where to find this document:

  Oracle Enterprise Data quality customer Data Services Pack Installation Guide

  
  

  It is referenced in the Oracle® Enterprise Data quality customer Data Services Pack Siebel Integration Guide (Oracle & amp; reg;) Enterprise Data Quality).

  
  

  I tried to import the project in my test system, but there are some error messages. Therefore, I would stick to the documentation.
  

  
  

  Kind regards

  Daniel
  

  Hello

  All the technical documentation for Disqualification 11 g is online here: http://docs.oracle.com/cd/E48549_01/index.htm

  The CD Installation Guide is here: content

  The Disqualification OTN documentation page has the docs for 9.0 if necessary:

  http://www.Oracle.com/technetwork/middleware/oedq/documentation/index.html

  Kind regards

  Mike

• Windows Service Pack 3 problem after Installation

  I installed Service Pack 3 on my Windows XP Home Edition and once the computer restarted I had a black and white screen saying that there is a power failure or something else and I could either start my computer in safe mode, normal, or the last known configuration.  Well, the only way that I even get to the login screen is choosing safe mode. The other choices keep simply by restarting the computer and I to return to the black and white screen.  What can I do?

  See if remove the SP3 fixes the problem-

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  TaurArian [MVP] 2005-2010 - Update Services

• Service pack causes problems

  I am running Windows XP Home edition on my computer, and I do a lot of video editing.  The problem is when I have service pack 3 installed (or whichever is later) and my camera is connected to the computer I can't capture video from the camera.  Video-editing programs will always recognize the camera is connected and even control the camera, but when I try to save it will not capture any video.  When I Uninstall SP3, it works very well.

  The problem is that I have the SP3 (or later version) installed.  I just got a new Windows Phone, and I can't install the Zune program without the latest service pack.

  Please someone help!

  Thank you!

  Are there updates for the 'video editing programs"that will allow him to work properly when SP3 is installed?

  You can try to uninstall all "video editing programs' before installing SP3 and then reinstall them after installing SP3.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Service Pack 3 problems!

  After you install Service pack 3 on my Tablet PC (xp home), I lost the ability to turn (rotate) my screen for entries, carbonless.  On my other computer (the same but with service pack 2), it still works.  How can I remove 3 and reinstall 2?

  Contact the manufacturer for updated driver to correct the problem.

  And get the installed SP3 on your computer, also: computers running WinXP SP2 not will be offered NO more critical security updates, automatic updates will stop working, and the Windows Update Web site will not be available after April 12, 2010, until that SP3 is installed. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Vista Service Pack 2 problem

  My sound no longer works after installing SP2. He said: "no audio output device is installed" by the President in the right corner. There is no problem in Device Manager.

  See:

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  TaurArian [MVP] 2005-2010 - Update Services

• Update and Service Pack installation after system restore

  Hello

  I am a Customer Service representative your question for Windows XP. Here's the issue: System Restore will be restoring all the Service Packs and updates installed Windows XP on a Windows XP computer or at - it need to reinstall everything after the system restore?

  Please enlighten us on this issue.

  Thank you.

  a factory restore is not identical to a windows system restore.

  While a restore of windows re - interrupts the previous versions of the system and program files

  a factory restore is the original state of the computer at the same time that he has left the factory.

  so a factory restore will wipe the hard drive and then re-install all software provided with the computer original.

  to this end, if a faulty the system restore windows to make the system functional again, then the restoration of the factory is the ultimate option to make the system work again.

  the only way to solve a software problem is sometimes with the method above.  However, the method above can not solve the problem below.

  in return is that a windows system restore or a factory restore can overcome problems related to defective hardware.

  in any case, keep in mind that, before executing a factory restore, the user must copy their personal files and email boxes and internet Favorites before performing this procedure.

• Vista SP 2 hung up, Service Pack installation: step 1 of 3-0% complete

  Original title: Vista SP 2 hung up - what to do?

  Simply download the SP2 on Vista 32 bit and am hung up in "installation of the Service Pack: step 1 of 3-0% complete.".  Do not turn off your computer. "What is the solution?

  Hi bobmede,

  
  Method 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse, then check if the installation of the Service Pack 2 takes place.

  
  Method 2: you can follow the steps described in the article below that addresses the question

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  (The article applies to the KB 937287 update, steps applies to other updates)

• Vista Service Pack install problem

  I tried to download the Service Pack for Vista on my computer last night.  It was about to finish when he says that the service pack was not installing step 1 and reverting changes.  It is then preceded to stop.  I get the same message all night! All the answers that I found online, people were able to go to their start menu, but I can't even to this because every time it reboots it says me haven't installed ServicePack and it tells me it stops!  WHAT SHOULD I DO? Help, please!

  Jason

  Hello Jason,

  Thank you for visiting the website of Microsoft Windows Vista Community

  If I understand your message, your computer is stuck in a constant fitness market program.

  Lets see if we can solve this problem...
   
  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Smartphones blackBerry Service Pack download problem

  Hello.

  I am trying to display Asian characters in my "BOLD", but I have problems with service packs.

  I have problems to download any service pack! I tried the Hong Kong packs and packs of AT & T but my problem is that the download is going really slow, suddenly stops and the file download is incomplete. This is perhaps due to the blackberry Web site?

  I tried to download several packages, different suppliers, different days this week, even using different browsers (Firefox, Chrome), but it's not helping.

  No idea what's going on? or what to do?

  Servers without doubt just slow and/or you are login time-out.

  There is no servers spread down that I've heard.

  Keep trying.

• Get random errors and missing fonts after July 2011 service pack installation.

  Original title: July 2011 service pack... it completely trashed my software... How can I fix... I can't do system restore yet because no words to do

  I get random errors and missing fonts in all directions... everything was going well until the package of July tried to install it, and then everything went haywire.

  Hi KarenBillette,

  1 do you have. which Service pack tried to install?

  2 Windows operating system you are using?

  Method 1:

  You can try to remove the update from Windows update and check.

  Remove an update

  If this is not possible, then you can try to boot in safe mode and check if you can do a system restore.

  Method 2:

  Step 1: Try to start in safe mode.

  Start your computer in safe mode

  Step 2:

  You can try to perform a system restore to a point of restoration before the update was installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• service pack 2 problems

  I installed SP2 successfully, but after installing im now stuck to my login screen.  This never happened b4 until I installed this update.  whenever I tried to connect to my computer, it sends me to the login screen.  the only way I can get to my office today is through safe mode (the only way loging in works).  I have now uninstalled service pack 2 update to my computer and im stuck on the login screen.  How can I fix it? Please help someone.

  Hi theclimbingman,

  Try the safe mode, if successful.
  Then try System Restore.
  http://support.Microsoft.com/kb/940765

  If it is impossible to start without failure, then go to startup repair.
  http://windowshelp.Microsoft.com/Windows/en-in/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex

  All the best.

  Soon :)