service pack Windows update-windows 7 KB976932

Similar Questions

• Windows xp service pack 3 update

  When go to the icon start, then on windows update and click on microsoft update, I get this

  Install the ActiveX control required to view the site The site is not correctly displayed on your computer without this control. To install it: 1 right click on the Internet Explorer information bar. It is located just below the address bar. 2. in the context menu, click install ActiveX control. 3. in the security warning dialog box, click install. Note: If the information bar does not appear, or if you have installed the control but still cannot use the website to take these steps to solve the problem. Example: Internet Explorer information with the menu bar

  but I never see the bar to activate the active X what's the problem?

  Windows Defender is an anti-spyware application, not an antivirus application: you must both be installed. But it is too late to install one now.

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck! In & out...

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP Professional starts in safe mode after the service pack 2 update

  I have an older version of Windows XP version 1.0 on a computer in November 2001 of the gateway that I have updated all offers updates of material such as BIOS and motherboard.  Then to the service pack 2 update so I can load an antivirus software which does not load unless you have SP2 or later version.  It loads like a champ and restarts, but Windows does not start normally, I have to start in safe mode and remove SP2.  Is there a driver error that I need to find?  Or is there an other update I need before SP2 for such an old version of windows? (He also did the same thing with SP3).  Help!  I tried to reload Windows with the repair feature, but was lost when he gave me a prompt C:\.

  Hello Doug12345,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you

  Input jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Hotfix for SQL Server 2005 Service Pack 3 update

  I tried to get the fix for SQL Server 2005 Service Pack 3 update. I downloaded it, but there is an error that appears. (WindowsUpdate_0000737D""WindowsUpdate_dt000"). I have went threw this Help window to fix this. When I get to step 5 there are two choices. 1 is engine mssmlbiz:Database. 2 is SQLEXPRESS:Database Engine. I choose both of them. one at a time and then I get to step 7 and this is where I hit a wall. I do not have an opption for the next button. Thank you.

  Try posting in the SQL Server Setup & Upgrade forum for assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   

• Cannot install Service Pack 2 update on my Vista 32 bit computer. (error 0x800f0818)

  original title: cannot install Service Pack 2 update on my Vista 32 bit computer

  Through the windows update install Service Pack 2 and keep getting error 0x800f0818.  Have run fixit and the tool of analysis, but always in error.  Looked this error but can't find anything about it.  How can I fix it?

  I think that what PA bear is coming in the post previous is that service pack will contain Vietnamese Windows updates necessary for their release.

  A little/sorta...

  KB2555917, KB2507938, and al. (which dates from July 12, 2011 & before) would have been the last installed if updates Vista SP2 is not installed yet.

• UAC trouble after Service Pack 1 update (Win7)

  Hello

  Anyone have problems with UAC on Windows 7 after a Service Pack 1 update?

  After the installation of the Service Pack (in fact after installing a hotfix for KB2442962 but the Service Pack install this fix themselves),

  programs (e.g. install a programm), requiring a user access control stop after I entered the password for the administrator.

  Other things work until they need an administrative account and password. I can only disconnect and then sometimes, I get the error message (translated from German): "too many 16-bit-program files are in use. "16-bit-programs close or increase the value of 'files =' in config.sys. Is that everyone, who have this problem?

  Someone knows how to fix this?

  Hello

  OK I got it =) it's a Lenovo VeriFace software, which is not compatible with the UAC patch. After you have uninstalled VeriFace, there is no problem with installing software as a normal user =)

  If Lenovo have to fix bugs in VeriFace and spread of new software fixed!

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not install the Service Pack 1 update to my 64 bit Vista system. Get the 66A error code

  I tried several times to install the service pack 1 update on my Vista 64 bit system. It is always fails and gives me the error 66 has code. When I click on using this code I get nothing.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• installation of service Pack 3 updates problem, asks me to insert the disc

  during the installation of service Pack 3 updates the system asks me to insert the disc of 2002 from microsoft that I did not

  Full version update may request Office source files
  http://support.Microsoft.com/kb/840169

• Service Pack 1 update error 0x800f0900 Windows Server 2008 R2

  Hello world

  We have a Server Windows SBS 2011 x 64

  And I need to install Service Pack 1, but when I try to installi Service Pack 1 I get this error (0x800f0900):

  

  So I ' sfc/scannow' and Microsoft update executed tool, I have service pack reinstalled, the server has restarted, but at the beginning of the OS, I received this error:

  

  I have the server rebooted and I repair options chosen, now the server is working, but service pack is NOT installed.

  Can you please help?

  Thank you

  This is the log file of the analysis tool:

  Checking Windows Service Packages

  Checking of manifests package and catalogs
  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_7_for_KB2644615~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1:
  (fix) CBS MUM corrupt CBS file replaced Package_7_for_KB2644615 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.0.mum of the firm: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab.
  (fix) CBS paired CBS file also replaced Package_7_for_KB2644615 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.0.cat of the firm: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab.
  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_9_for_KB2644615~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1:
  (fix) CBS MUM corrupt CBS file replaced Package_9_for_KB2644615 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.0.mum of the firm: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab.
  (fix) CBS paired CBS file also replaced Package_9_for_KB2644615 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.0.cat of the firm: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab.

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-t... minalservicesclient_31bf3856ad364e35_6.1.7600.16722_none_aa0f257e3a9a9796.manifest amd64_microsoft-windows-t... minalservicesclient_31bf3856ad364e35_6.1.7600.16722_none_aa0f257e3a9a9796
  (fix) CSI shows all zeros CSI replaced file: amd64_microsoft-windows-t... minalservicesclient_31bf3856ad364e35_6.1.7600.16722_none_aa0f257e3a9a9796.manifest to: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab
  (f) CSI catalog bribe 0x800B0003 winsxs\Catalogs\673495388b1502a8cd9f021da1531b7b5b2a40f41d56f6062248e7e71d0cb906.cat 3b2f68fe4d6... a59384bb797_31bf3856ad364e35_6.1.7600.21092_7caaba89deb50f41
  (fix) CSI CSI corrupt file catalogue replaced the file: 673495388b1502a8cd9f021da1531b7b5b2a40f41d56f6062248e7e71d0cb906.cat to: C:\Windows\servicing\Packages\Package_6_for_KB2644615~31bf3856ad364e35~amd64~~6.1.1.0.cat
  (f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21719_none_d865cffc88454a4e.manifest amd64_microsoft-windows-mail-comm - dll_31bf3856ad364e35_6.1.7601.21719_none_d865cffc88454a4e
  (fix) CSI shows all zeros CSI replaced file: amd64_microsoft-windows-mail-comm - dll_31bf3856ad364e35_6.1.7601.21719_none_d865cffc88454a4e.manifest from: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-2jan13.cab

  Summary:
  Seconds executed: 366
  Found 5 errors
  Fixed 5 errors
  County CSI shows all zeros Total: 2
  Correction: CSI shows all zeros.  Total: 2
  Total number of corrupt CSI catalog: 1
  Correction: CSI catalog corrupted.  Total number: 1
  CBS MUM corrupt count: 2
  Correction: CBS MUM corrupt.  Total: 2
  Correction: CBS paired file.  Total: 2

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Update invites me to install a service pack Windows, but whenever I do, I lose my internet connection.

  I use internet 8. Windows Update repeatedly continues to ask me to install the service pack that when I do I lose my internet connection and there to remedy, I come to restore the system to a previous date to get my internet connection

  Hi James,

  1 Windows operating system you are using?

  2 are you facing this problem after installing service pack (SP) or at the time of installation of SP?

  If you are faced with the question after the installation of the service pack, you can visit the computer manufacturer and try to update the drivers of network card on the latest version and check.

  Updated a hardware driver that is not working properly

  You also try to launch the troubleshooter from the following link and check.

  Windows wireless and wired network connection problems

• Windows Vista Service Pack 2 updates

  I want windows to automatically download updates. I have my pc set to automatically download updates every day at 01:00. However, when I turn on my pc at about 09:00, he lets know me there are updates, but it will not install automatically. I install manually. As soon as I install manually, I get another notfication within 30 seconds, advising there is of new updates. Is there a way that my pc will automatically install updates without having to manually install every 30 seconds I? The update is called Windows vista service pack 2. If I continue to update when it warns me, there is no end to the amount of updates that 1 day ago. This can be corrected?

  sbird,

  see the following topics

  (1) read this firsthttp://windows.microsoft.com/en-us/windows7/Understanding-Windows-automatic-updating

  then apply the following

  (2) the same applies to vista / read and implementhttp://windows.microsoft.com/en-US/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  free unlimited installation and compatibility support is available for the windows vista SP2 until August 30, 2010 issues.

  availability of support chat or messaging differs depending on your location.

  some questions may require that more support for which he is advanced a charge.

  go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (i.e., download problem; installation problem problems after installing a service pack).

• XP is slow after all service packs and updates. Is there a summary of Windows XP that includes all upgrades and runs FASTER?

  I reformatted my Dell 2.4 ghz pc (only 512 MB of ram) to the original state of xp. It was incredibly FAST.  But to run programs, I was forced to upgrade to service pack 2. Service this pack 3.  It is slower than molasses in January in Chicago.  Microsoft has an XP consolidated and updated that includes all the security updates and new features in 1 integrated fast program?

  Spin Norton - bought after that it came with the machine.

  Ah! Norton applications are notorious for not not upgrade (or uninstalling) itself. This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Add/Remove Programs.

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft