Service Security Center Windows 7 home Premium is absent and cannot be started.,.

Similar Questions

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Windows 7 Home Premium 64 Bit and my DirectX diagnostic tool says that my current version is DirectX 11, but when I try to run space engineers, it tells me that I need to run DirectX 11

  * Original title: DirectX and space engineers

  Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.

  Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.

  Looks like no shore leave for you then... :)

  "NOTE: the minimum requirements are enough to run the game, but without the global functions,

  which requires DirectX 11. »

  "When I go into my file DirectX it tells me that I'm running DirectX 9.0"

  Direct X folder?

  Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).

  It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.

  EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).

  ----------------------

  -Here is a list of the .dll Direct X files you when files are updated.
  There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dll

  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  -They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
  . & Finally d3dx11 - 42 43 >.
  It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.

  If all of these files is missing update Direct X using the DX Web Installer.

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case

  DX must be reinstalled using the full DirectX redist (June 2010) -

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM INSTALLED PR AND I HAVE NO CD

  Good evening

  I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

  I CREATED THE SETUP CD.

  IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

  Thank you

  Saturday, may 3, 2014 15:41:51 + 0000, eduazevedo wrote:

  Good evening

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

  I CREATED THE SETUP CD.

  IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

  No, you should not lose it.

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Operating system of Windows Vista Home Premium 64-bit and Web folders

  I have a person how contacted me via his personal computer.  The laptop runs Windows Vista Home Premium 64-bit operating system.  He tries to use his web folder.  The system is up-to-date on all Microsoft Patches, including Service Pack 2.

  When you try to add a network folder by using the network location feature add to create the web folder a message occurs the link is not valid not a folder.    However, I know a valid folder because it works on Windows Home Premium Service Pack 2 32-bit very well.

  Yet once, why he does not on Vista Home Premium Service Pack 2 64-bit?  Y at - he of the additional fixes that do not appear on the Microsoft Update?

  I also have the same problem. The KB907306 does nothing for my system.

  Any other ideas?

• WIndows 7 Home Premium 32-Bit and 64 - Bit

  I have 3 computers.

  spirit of old dinosaur of 13 WIdnows 7 Home Premium 32-Bit (HP desktop computer)

  A few years games laptop with Windows 7 Home Premium 64 - Bit (ASUS laptop)

  An old and shit computer laptop with Windows 7 Home Premium 32-Bit (Dell laptop)

  All three need to be reinstalled Windows and I do not have a partition to reinstall on one of them. I do not have a disk to reinstall to Windows for all computers and was wondering where I could maybe download a tool or download a specific version of 32/64-Bit windows on a USB key to install on these laptops using the download Windows tool, or it wouldn't work? If this would be not so someone could give me a sort of alternative on how to do it.

  Any help would be greatly appreciated, thank you. I accept and even welcome constructive criticism.

  During the installation process, we will give you the opportunity to delete existing partitions and create a single large in which you install Windows 7.

• I built a computer by using the hard drive of my laptop which has windows 7 Home premium on it and I get messages to activate windows

  Recently, I built a computer, but I get messages from windows activation; I used the hard drive of my laptop which had windows 7 Home premium top and I never had any problems with it. Can anyone help?

  Original title: validation of Windows

  >to be filled by O.E.M. power O.E.M. American Megatrends Inc.. 1101

  Based on your report, you seemed to have changed the motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  You can try the phone activation, there is no guarantee:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows could not start service Security Center, Windows 7

  I am using windows 7 ultimate in my laptop, but whenever I try to open the security service windows to open action center located on the menu to the Quick Launch bar, it generates an error message stating:

  "Could not start the windows Security Center service.
  No error number.

  You can try the steps below and check if the problem is resolved.

  Try to manually start the service from the Services Management Console.

  For the Services console type in the find field, then press ENTER. You will need to click continue if you are prompted to open the Services window.

  After the opening of Component Services.

  Click: Services (Local)

  At the bottom of the window there will be two tabs, click: Standard

  After that will appear a list of services, including Security Center

  In this window, you must locate the Security Center service do a right click it and go to Properties, select Automatic, and then click apply , then select Start.

  If your Security Center turns off automatically after a few seconds or minutes, proceed as shown in the following post:
  COMBOFIX WORKED FOR ME! in Windows 7
  My symptoms were the same as above. Only when affecting the automatic Security Center service, and the startup, it automatically set it to homes disabled after a few seconds or more.
  This solution worked for me,
  -activate the hidden administrator account by following the steps on this tutorial... http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
  -Once finished activating in the command prompt, to bookmark the websites for later use and log on to Windows.
  There is now an administrator option in the logon screen.
  -log on to the administrator account open a browser and open this page again.
  -Click on this link below and download to your desktop... http://www.combofix.org/downloadlink.php
  -disable your connection and internet anti-virus software.
  -Now run combofix.exe
  A window will appear and many scans will take place. It will take some time. Finally, the computer may restart. When this is the case, log back in the administrator account and Combofix will resume running for a little while. Do nothing until the log file appears automatically.
  -Restart your pc and you log in Administrator account.
  -now set the Security Center service back to automatic, then click on apply. Then, click on start and ok.
  -Restart your PC and you can now log in to your normal user account.
  Everything should work now... Well, it did for me.
  If you want to disable the account again, you can do so by following the steps to disable in the link above.
  After HAVING finished with "Combofix" you may have to restart your computer once more, and then go to "Security Center" again via "Component Services" and Activate and Start Security Center. This time, it will work for good.
  I hope this helps and good luck!

• 2 years ago, I bought windows 7 Home premium in Spain and now I can't enable it more with the original key

  Because I get virus despite I have 2 antivirus I have to reformat my hard drive and reinstall my PC frequently.

  Now, all of a sudden my Windows 7 Home Edition premium does not activate despite more I gave good code for windows. What is c?

  Try again by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  I would recommend as suggested to create a backup of the installation of Windows 7 activated and when you need to reinstall, restore you the active picture.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• I need to remove installed OEM Windows 7 Home Premium 64 bit and install XP. Help please!

  It is a new work computer, not my personal machine.  Our main piece of software, ACT! 2000, will not work on W7.  We bought the new law! 2010, but he does not play well with the rest of the desktop computers, server included.  I know that the best thing to do would be to upgrade to Windows 7 Pro, and then load Windows Virtual PC to run XP.  But because of $$$ and $$$ already spent on this new computer, upgrade to W7 Pro is not on the table right now.

  And am not extremely computer, but I get.  :)  I did a lot of reading on the erasure of Windows 7 & install XP, and I've seen a lot read on hardware/driver problems: ATA, AHCI and SATA configurations... now I'm just lost.

  Is there someone who can tell me, in terms of Joe 6-pack , how to proceed?

  Once, my new Dell Inspiron 560 came loaded with Windows 7 Home Edition, and I need to remove it completely and install Windows XP, I have the disc.

  Thanks a bunch!

  Unfortunately, Dell provides Windows XP drivers for this system, so any installation of Windows XP is not supprted by Dell andcan not work and even install

  To install winxp you need a retail version of Windows XP, you must then boot from winxp cd and perform a clean installation

  http://michaelstevenstech.com/cleanxpinstall.html

• Windows media center, windows 7 Home premium

  I tried to get WMC to work with the HDHomeRun for these last two days, but not luck.
  tried all the mcupdate install/reinstall-* reset * task etc. in the end WMC gives me a message
  "TV Setup has encountered a serious problem... »

  for some reason unkonwn when I uninstall WMC using the windows feature the option at each reboot it popus place once again IE it can not be uninstalled or disable them on my PC. I tried to set the ehRcvr.exe to the local user etc. but still no luck.

  can someone please.

  reinstalled windows which fixed the WMC re/install-uninstall issue.

• I have windows vista Home premium, multimedia player and I want to play avi movies file, is there an update so that I can do?

  My daughter gave me a copy of a film, but it's an avi file (as it has windows 7), and my Media Player will not play the image it is his no picture. Do I need or there at - it something that I can download to fix the problem. Thank you.

  Is it a movie clip created with a digital camera?

  Did you record the clip on your desktop or in
  a folder on your hard drive?

  There is a small chance that the file would play if you
  Rename it to. AVI to. MI/GAL.

  It may be interesting to try to download and install the
  Freeware VLC Media player... He'll play about
  whatever it is.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Keep in mind, there are many types of AVI files.
  The following utility to identify the various .avi
  codecs:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  If it is a film of full length and you find that it is an Xvid file...
  You can download the Xvid codec from the following site:

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

• Windows Vista Home Premium with SP2 and IE9 guard reinstall KB890830

  It is there no error code actually after every time it is said installed successfully.

  Computer HP CNX72415hd model

  Any ideas.

  Hi Glenn4001,

  Follow the troubleshooting steps in this document to resolve the problem with the update offered repeatedly.

  Let is know if this helps.

• Adobe Flash Player 10.3 does not work on my computer - HP with windows Vista Home Premium 32 bit and Internet Explorer 9.0 32-bit

  When I load Adobe Flash Player 10.3 he says he has successfully installed, but if you go in Panel, programs and features, it shows Adobe Flash Player 10 Active x, the date of installation, but the size of the file is empty. Also in the internet Options tag program, manage add-ons, as it does not appear. I removed Adobe Flash player and tried to download again - same results.

  Hello
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can check this link:
  
  http://kb2.Adobe.com/CPS/191/tn_19166.html