service tag and nfc without head

Similar Questions

• Memory, databases and applications without head

  I've been struggling with this problem for some time now so let's go.

  As many of you know headless apps allowances of bunch of limit of 3 MB, which is fine, except when using Qt/Cascades objects that don't care much to consumption of memory, two examples are QNetwork and QtSql, who will blow easily your budget of memory in a single operation.

  I have simple ' SELECT * from Table' queries that consume more than 6MB, which then effectively disables the component without a head. More precise, I do the query the heap more than it consumes. So I tried libsqlite3, results were similar. It was however the promise to provide a chunck of mmap would or memory of static array for substitute of the bunch, but I can not:

  sqlite3_config(SQLITE_CONFIG_HEAP,...)

  to work correctly, it returns an error (1) every time.

  Unfortunately, I'm at the point where it seems that a component without head who uses SQL can be impossible with the current memory limit. Can anyone offer a solution to the use of SQL with headless while maintaining a service that runs reliably?

  -Are there when even to provide a static heap memory for QtSql use?

  -Are there a way to limit the memory used by QtSql?

  Thank you!

  EI

  The solution was to restructure my database, as awkward as this has been significantly reduced the memory required for the information necessary to satisfy the query of data in the buffer. In others, rather than have a huge database of the 8 column I broke it into several two databases colum - when the part without head wants just a little information is exactly what he will get so surprise elimination memory usage spikes.

  The problem still exists: as the database develops for a query memory requirements. Has no way to control the maximum limits memory use for QtSql complicating an app without elastic, even theoretically impossible to write head.

  EI

• Help - profile change Service models and policies without changing the existing MAC or WWN vNIC and vHBAs

  Hello

  I would like to know if there is a way to preserve existing vNIC MACs and WWN vHBA if I change the model of a Service profile?

  To clarify, our Service profiles have been created since an initial model, and now we'd like as these Service profiles to point to a - model - update to simplify management.

  Initial-template originally provided manually created vNIC and vHBAs and used no LAN or SAN connectivity political, but the new updated model made.

  VNIC names and vHBA names, as well as the MAC and WWN used in connectivity pools policies update-model are the same as those currently used by the Service profiles.

  To rephrase the question:
  Is it possible to change initial-model a Service profile to a template update with essentially the same everything, without changing the UUID currently in use MACs of the profile Service, WWN and perhaps?
  If the answer is that they are not the same when this happens, then someone know of any workaround?

  Thanks for your help!

  RR

  Hi RR

  With respect to the Central of the UCS and sequential allocation:

  https://supportforums.Cisco.com/discussion/12006286/UCS-Central-sequenti...

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...
  New features in version 1.1(2a)
   
  Allocation of ID sequential for pools, such as addresses MAC, WWN, IP and UUID

  The procedure I would use:

  -Create the update model

  -remove the link 1. Initial model EP

  -delete this 1. SP (this helps to release all the values in the pool)

  -create new MS to model update (it will inherit above pool values)

  -Repeat for all AOCS

  I did this several times without problem (for example, no need to change the zoning of FC). Of course it is disruptive, by blade and SP.

  Don't know if this unbind / bind procedure works without reserves.

  See you soon

  Walter.

• Service Tag #*-595

  Hi, I am having a problem with a notebook dell studio 1535. when starting, get a mensje that says: This computer system, # ******* - 595B, is protected by a password authentication system. You can not access the data on this computer whithout the correct password.
  It would appear that the message is hard disk lock, but when connected to another computer I can access my data, I mean that is not locked the disk.
  What would remain to be password bios, but because it comes off as service tag # ******* - 595b? if the bottom cover of the notebook contained 4CMXWG1 Service Tag and express service code 9471256705. The error asterisks makes me think that the bios has a problem because no change was made immediately before leaving this error. From one day to another failure and leaves no longer start Windows.
  Anyone have any idea that might be happening? no way to flash or update the bios without either from the application in Windows? From already thank you very much, I will be attentive to any response.
  

  You will need to place a phone call from voice of Dell support.  Be prepared to check the details of your property.

• How do I know what motherboard I have service tag

  I have a number of computers dell, optiplex 380. 780 and 7 optiplex 760 upgrade the processor with four cores, if possible, but I find that each model has 2 motherboard ' possibilities, how do find out what motherboard, I have the service tag, and if they can take the quad cores. As I understand it a motherboard can take single core dual cpu and motherboard, it is possible to upgrade to a quad core cpu

  There is no such thing as serial number based on the motherboard.  Serial numbers are unique.

  SFF and USFF power supplies tend to be too small.

  

  The NDP or DELL of the Board part NUMBER is on THE Board of DIRECTORS and is not connected either to the

  SERVICE TAG which is the same as the serial number.

  Carrots or not is TOTALLY NOT related to the service tag Associates to the power supply and other factors.

  http://www.Dell.com/downloads/global/products/Optix/en/OptiPlex-380-tech-guide.PDF

  http://www.Dell.com/downloads/AP/products/Optix/optix_760_tech_guide.PDF

  http://i.Dell.com/sites/DocContent/business/solutions/engineering-docs/en/documents/OptiPlex-780-tech-guide.PDF

  

• 680M nvidia drivers are located is not the site of service tag

  When you enter my service tag and watching drivers available for download, nVIDIA GeForce GTX GT650M / 660 M/GTX 680 M/GTX 675 M Graphics Driver is registered only for Win7, but I Win7 64-bit.  Is there a version of 64-bit driver available?

  I'll answer my own question... the pilot labelling was inaccurate.  He has been labeled for win7, but was intended for win7 64 bit.  After having extracted the files, it became clear.

• Insect caught in the monitor u2414Hb and support is a disaster. No service tag

  First of all the question I seek to solve. A small insect, probably a fly has managed to make its way into my monitor in any way. It became lodged between the Panel and an outer layer or in the Panel and quickly dies. And has been stuck in place for more than a month. Attempts to dislodge without disassembling the monitor failed.

  Now, AFAIK disassemble the monitor to clear it will void the warranty and risk of damage to the screen so I prefer to avoid. I decided to contact the Department of support or guarantee dell to see if we could do something on this end.

  The monitor was purchased new from NewEgg.com on 01/01/15, with an indicated 3 years manufacturer's warranty. So, it should always be in the manufacturers warranty period.

  Although none where Dells website, or via their telephone system you can contact the technical support or departments without a number of warranty service. My monitor does not have a serial number, and Dells own materials state clearly that stand-alone monitors sold prior to 2016 (like this one, in 2015, has bought manufactured 2014) do not always have a service key.

  I tried every number on my monitor and its box, both online and telephone assistance. A number search as a service on the Web site key (but not with the telephone assistance) and appears as a system of office since 1997.

  Telephone service has been terrible. Repeatedly asking a service key, even when I explained that I don't have not one. Repeatedly ask me about Dell computer system I bought it, despite my clear statement that my problem was equipped with a screen of stand-alone and that I was not the owner of a dell computer system. Repeatedly asking me a Dell order number, despite my stating clearly it was not purchased from Dell, but bought new from newegg.com. Repeatedly telling me to contact the seller (newegg) to some how get help as a guarantee of the manufacturer. They told me a serial number was unnecessary because millions of people had bought monitors with this serial number. As if this makes no sense at all. I was told that a product model could be used to find what product I was calling about. I was told no numbers appearing on my device, or on its original packaging (that I kept) could be found in any system. I was transferred to several operators in several services all followed the same scenario and giving the same spiel on the * service tag. Before an operator involved, I've been dishonest and has asked for my phone number. All this despite the pages of Dell support stating clearly that some of their products do not have a key support.

  It does not appear to be process at all to deal with Dell products manufactured and sold without this little number that supposedly so critical. Dell apparently cannot do anything with the model # and # series uses all manufacturers in the world.

  . Exactly how to make contact with the service the customer without a service key.

  And can do something about the dead bug that introduced itself in the center of my screen as a brown spot little? Or am I stuck risking the destruction of my monitor with a canceled warranty? It doesn't make sense that a bug should be frankly worm its way between the layers of the screen.

  Monitors without a number of service purchased from resellers (Amazon, Best Buy, Buy.com, cost Co, Wal-Mart, Sams, other boutique online, eBay, etc.)
  * Based on the start date of monitor 20 digit PPID number code, Dell will guarantee the monitor for 3 years for most monitors. There are exceptions (S2340M, S2340L, etc.) who had only 1 year warranty.
  * You must contact the Support of your country (1-866-618-2044 USA) by telephone. Tell them to open only one internal Dell Oracle knowledge Information Centre
  * In the search space, they should enter PNP13081, and then click search. This opens the article,
  "Replacement for the monitor Dell and procedure policy - political international Dell. They should read scenario 7

  Scenario 7 =.
  Discussion: The customer is unable to provide a Dell order number or monitor the Service tag number. The only information that the client has are the PPID 20 serial numbers for the monitor.
  Warranty: date 3 years from manufacturing monitor integrated in the PPID number 20 digits
  Replacement procedure: Implement the replacement of screen against the dummy tag

  * You would provide the following representative data if you need a replacement monitor in this 3-year period:
  Brick or shop online address and a copy of Bill of sale:
  Monitor model:
  Monitor 20 digits alphanumeric serial number PPID:
  [Your]
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Operating system:
  Video card:
  Video card ports tested:
  Question:
  Performed troubleshooting:
  Monitor the done Factory Reset
  Watch chess self-test Diagnostics and integrated
  * Post more troubleshooting

• Has no hard drive, and emits the Service tag

  Hello

  The hard drive on my Inspiron 1501 seems to have gone wrong, it caused a right emergency stop about when it's a very sounding nasty, high rise, whirring noise. Diagnostics from the Start Menu running on this point as the hard drive test failed.

  Now to start the computer stops loading windows once past the initial splash screens.

  Replacing the hard drive is not, actually, I already have another to replace it. The problem is that this laptop came with no disk for the operating system (XP) support and drivers. Everything was simply stored on a separate partition.

  However, the biggest problem of all is that my service tag sticker is missing, apparently after having door/peeled out of the bottom of the laptop, and without being able to log on in fact at all I don't know how to find it at this stage.

  I suspect that any help from Dell's Tech support will be a process much more awkward without the re-initialisation tag #. The only other option that I noticed by looking at a page on the order of the drives support was the "order No." the purchase, I have of course failed to follow as well.

  At this point, I'm just curious as to what my best options to possibly retrieve serial number if it's even feasible. I'd rather be ready to do a simple process once I have involve technical support.

  Thanks in advance for any help.

  
  

• Get a Push notification on app without head and application

  Hello

  I have included an app without a head for my current application, because I am handling becomes class PushService when push comes this application without a head. But I pushservice in running my application also to get called when comes to push, and my request for traffic not called when the push... How can I get push notifications in both without head and noraml app.

  You can take a look at the documentation
  https://developer.BlackBerry.com/native/documentation/Cascades/device_platform/headless_apps/

• How detect the NFC tags and features?

  Hi all

  Does anyone know how to connect with NFC Tag. I want to apply as if we put my phone blackberry on NFC tag while entering the call. So my request should end this call and send an sms to the caller.

  Please let me know if anyone has an idea about this Protocol of NFC tag. How detect the NFC tags and features?

  Thank you & best regards

  Neeraj Chauhan

  Hi Neeraj

  There is a code library and items at your disposal. An article is precisely tag reading and writing, and there is an application open source in our GitHub repo.

  See the next page for a list of all of our resources for NFC developers:

  http://supportforums.BlackBerry.com/T5/Java-development/NFC-article-and-code-index/Ta-p/1538775

  Concerning

  mwoolley

• Can manually transfer you the work files and touch (without Cloud Computing service)?

  Can manually transfer you the work files and touch (without Cloud Computing service)? I can't find where Touch is to store my work files. The cloud service also says that it is a 30 day trial. Does include just the 2 GB storage space? I have no interest in other services and just want to be able to get my images to and from my tablet.

  On a side note, it would be nice if it was easier to switch between the gum and the brush.

  Hi rtan73,

  The 2 GB of storage space is complementary and is available indefinitely.

  30-day trial you're talking about is for a full creative cloud subscription. This includes access to all Adobe CS applications + many more, but is a limited trial. You should be fine with just the 2 GB storage cloud, however.

• WebWorks app with part without head

  I'm devolopping a webworks SDK-based application.

  I want to develop a plugin that communicate with a native service without a head.

  I used the sample of The Headless Service sample that shows how to create a long service life without a head.

  Also, I used the model of the creation of a plugin of cordova for communication between JavaScript and native part.

  2 samples of separately work fine, I have not found how to configure make them work together. I mean How to invoke the service without a head form Javascript side.

  As BlackBerry Webworks Extension Native and native headless service project have the same structure of project, I don't have how to configure my Webworks and my native project without head to communicate with each other.

  Help please?

  Hello

  WebWorks 2.1 has a «create headless» CLI command This operation generates a sample application in which the momentics project built directly in the project WebWorks. It illustrates invocation of WebWorks for headless.

  http://developer.BlackBerry.com/HTML5/documentation/v2_1/creating_a_ww_app_with_headless_app.html

• Application crash without head

  I have a headless application that consists of a user interface that displays information and a background process that manages the communication networks and raise important data notifications should be retrieved as the user needs to know.

  Looks like what they describe the background process has ended, although I'm waiting to hear if this is indeed the case, and it is not just a bug in my code.

  As I need this service running at all times to manage the network connection is a way to define the process restarts on release without requiring the user interface to get involved or restart the phone?

  You can send a message to hub or NotificationDialog in your app without head destructive code, but chances are that if the app without head has stopped working, it is due to a failure and your Shredder could never be called.

  I know a dev that used a second application without head who would conduct sporadic inspections to see if headless app 1 is running and he would invoke if it no longer exists. This solution is not for everyone, the user will install 2 apps.

  Best solution is to check your code, try to catch the dump if possible user's telephone logs, there is probably an error somewhere that gives the crash without head or your application gets terminated by the operating system when it exceeds the limit of 3 MB heap (check for memory use).

• Citing the part of the user interface of the game without head in an app without head

  Hello

  I try to call my interface section user app without head of service class (part long term without a head), as shown below:

  application of BB::System:InvokeRequest;

  request.setTarget ("com.myDomain.myAppName");

  request.setAction ("com.myDomain.myAppName.START");

  InvokeTargetReply * response = m_invokeManager-> invoke (request);

  {if (Reply)}

  QObject::connect (response, SIGNAL (finished (()), this, SLOT (onInvokeResult ()));

  _invokeTargetReply = response;

  }

  else {}

  qDebug()< "failed="" to="" start="" invocation:="">

  }

  the error response is always "not objective". I double checked that the id of the target is my id app (user interface section) and that it is registered as target to call in the xml file bar

  
  application
  myAppName
  
  Icon.PNG
  
  myAppName
  

  I don't know why he keeps giving me the error response target?

  Made a typo, the Notification and NotificationDialog are part of the bb: platform.

  Here are their respective documents:
  Notification https://developer.blackberry.com/native/reference/cascades/bb__platform__notification.html#function-...

  NotificationDialog https://developer.blackberry.com/native/reference/cascades/bb__platform__notificationdialog.html#fun...

• Transfer gamer tag to the new Xbox, lost account and signed at old gamer tag shows up. Where is my new gamer tag and saved game history and avatar?

  I initially started with an older Xbox360 and played for a few years before the xbox has requested a change of tag gamer for free on my Xbox. So I changed my gamertag and everything was going well until my Xbox 360 broke and forced me to buy a new xbox360 slim. So I bought the hard drive transfer cable and transfer my game data and now it asks me to enter the password and email with this account and when I do it says that it does not match. When I log on my computer it shows my old gamer tag not my other or one of my friends or recorded the history of the game. When the Xbox support helped me download my account on Xbox it came with my old new. I only got an email all my life, so I know that this is the correct e-mail. How can I get the correct information for my new gamer tag so I can access my account on my new Xbox and play without having to create a new and lose all my past history, gamer points and their friends?

  Hello

  Thanks for posting in the Microsoft Community.

  The question you have posted is related to the Xbox and would be better suited to the Xbox community. Please visit the link below to find a community that will provide support to ask you:

  http://support.Xbox.com/en-us/