Service user profile service has no logon. User profile cannot be loaded.

I'm running Vista 64 bit only 1 acct.which is admin and when I try to log get multipoint user profile Service failed to connect. User profile cannot be loaded. How can I solve this problem?

Advertisement

Hello
 

Method 1.
If you are able to boot to the desktop with a temporary profile, then click on the fix in the article below.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Note: If you are unable to boot to the desktop at all then see method 2.
Method 2.
a. restart your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step
b highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17
c. If you are able to connect, once the command prompt appears, type: net user administrator password / active: Yes (you can specify the password for the administrator account.)
d. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r
e. Boot up again by pressing F8, but this time choose just the SafeMode.
f. you will be able to log in as administrator with the password set in step 3
g. hit (windows logo) + r.
8. type regedit
g. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
i. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15
j. right click and click Rename, and then change it. TO BAK. BK
k. right click with the same numbering but without the. BAK and Add. BAK add at the end
l. right click on one that you have renamed to BK and click Rename, delete the. BK
Mr.. Finally, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.
n. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data
o. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.
p. If you can't connect in Safe Mode, and then restart, press F8 until you see the menu again, and then press enter highlight repair your computer.
q. wait until all files Windows finish loading, then click Next, when he asks for the language of the keyboard.
a. try signing in here also, choose your username in the menu drop-down, enter the password, then go to step 23
s. If that doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.
t. hit F12 until you see a menu of boot options, choose boot from CD
u. Select the keyboard language and then click Next. Find repair your computer for a little below the center-left.
c. Select Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)
I hope this helps.
 

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • User cannot connect again PC Windows 7, error "the user profile service has no logon. User profile cannot be loaded.

    Our plant manager just got a new PC and I've set up with Windows 7.  I can log on fine using my user account.  But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile.  It can connect to other computers fine, Windows XP & Windows 7 computers.  It's just that a laptop could not connect to.

    It was a VIP user.  He's my boss of bosses bosses if you know what I mean.  What I can do.  I tried "patches" for the mistake that I found online, but none of them helped.
    Help me!  Please, I beg you!

    I did other tests just now and I seemed to have found a "solution".  Here are the steps:

    1 Add the user to the local Administrators group
    2 log in as a user
    3. close the user session
    4 log in as network administrator / local
    5 remove the user from the Administrators group
    6 log in as user
    7. the success!
    Still do not understand what was going on the devil, but at least I know the work around her now!
  • Service user profile Service has no logon. (State continues to change on 32768)

    I got the error "user profile Service service doesn't have the connection.", so I searched the Internet and found the microsoft registry editor guide, so I followed him but every time I put the 0 State, if I logout and log turn it on in safe mode it changes back to 32768? How can I stop it changing back?

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
    Safe Mode account has no default password (so unless someone changed
    the password should be available).

    Some programs such as the Google Updater (if you've added the Google toolbar,
    Chrome or Google Earth) has been known to cause this problem.

    Error message when you log on to a Windows Vista-based or Windows 7
    computer by using a temporary profile: "the user profile Service has no logon.

    Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have visited
    logged on with a temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    ----------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ----------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ---------------------------------------------------------------------------------------------------------

    If you can't access your old account you can still use an Admin to migrate to one
    new (remember to always leave an account Admin who is not used except)
    to test and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Satellite L750 - user profile service has no logon

    Oh Dear

    I now have an attractive thin red brick
    What to do to fix outside such scary things?

    Note the new hard disk password is ok

    + The message was edited: link has been removed.

    I guess this will help you solve your problem, because it seems to be known MS system issue:

    See article Microsoft Knowledge base:
    [You receive a "the user profile Service has no logon error message:"] http://support.Microsoft.com/kb/947215/en-us]

  • Re: Satellite C660-242 - "the service user profile Service has no logon.

    By turning on the laptop the following message when you try to enter the password
    "The service user profile Service has no logon.
    "Unable to load the user profile.

    Hello

    Check http://support.microsoft.com/kb/947215 and post comments to the first Microsoft document on this issue.

  • Log the user in the section problems - the service user profile service has no logon

    Hello

    Every time I try and log on to the laptop computer, the following message is displayed.

    "The service user profile Service has no logon.
    Unable to load the user's profile.

    other profiles can be connected without any problems.

    If you can help that would be great

    See you soon

    Check http://support.microsoft.com/kb/947215
    Maybe this can help you.

  • Error - "the user profile service has no logon.

    Original title - login

    When I try to log in. I get the message. The user profile service service has no logon. How can I fix it?

    Hi DonPatton

     

    1. what operating system is installed on the computer?

    2. for how long have you been faced with this problem?

     

    If you are using Windows Vista or 7 operating system installed on the computer, then you can refer to the link below and check if the steps provided assist solve you the problem-

    http://support.Microsoft.com/kb/947215

     

    I hope this helps.

  • The user profile service has not logon. User profile cannot be loaded.

    This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

  • HP Pavilion CPU: "user profile service service has no logon.

    The following message when I try to log in with my password "user profile service service has no logon. Please help me if I can log on. Thank you.

    Hello

    You can try the following.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    If none of the suggestions above help, try to run through the steps in the guide on the following link.

    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

    Kind regards

    DP - K

  • Error: "the service user profile service has no logon. Unable to load the user profile.

    Original title: can't log on...

    When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...

    Hi, Thunderrad25,

    Are you able to get into Safe Mode?  Try a system restore.  Select a date prior to the incident happening.

    These can be useful as well-

    A temporary profile is loaded after you connect to a Windows Vista-based system

    http://support.Microsoft.com/kb/947242

    The user profile Service has not logon.  View user profile cannot be loaded.

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  • Error message: the user profile service has no logon. Profile of user was not found.

    Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

    The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

    Thank you

    Joe R.

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • Error 1051: User profile Service has no logon

    Mr President.
    I use a real operating system Windows Vista Home Premium SP2 with my laptop Lenovo Y430. I have recently updated to SP1 to SP2 Windows Update online. last week when I tried to log in one of my user accounts, the above-mentioned error popped up on my screen. on further verification, I found that the "user account" does not exist in the c:\user\(account name folder). I could not find the same in the registry editor "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList".

    I've traveled all your forums to get help, including http://support.microsoft.com/kb/947215. even installed the "Microsoft Fixit" given on the same page, but it did not help. I even tried to restore my system to an earlier point.

    In addition, when I tried to stop/restart the "user profile Service", the same mistake invited each time. but when I stopped/restarted the "user profile Service" after the removal of the user of the control Panel\User account account, the system didn't invite me with the error. and then; even after the service is restarted, and then creating a new user, I was unable to login with this user account.

    now I find myself with a single administrator account to work with
    Please suggest

    Thank you in anticipation

    Hello

    Maybe this will help:

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in
    Safe mode has no default password.

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
    Earth) has been known to cause this problem.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been logged on with
    a temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Vista user profile Service service has no logon. User profile cannot be loaded.

    When we turn on our laptop on Vista we get a message "the service user profile Service has no logon.  User profile cannot be loaded. "When you click on 'OK', we are given a screen with the user profile on the computer.  It is never an option to log on with a different profile or as a guest.  It is never an option to start in safe mode.  It is therefore impossible to check records or attempt any other difficulty.  The computer is stuck in a circle without end.

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    -------------------------------------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    -------------------------------------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    -------------------------------------------------------------------------------------------------------------------------------------

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • the user profile Service service has no logon failed to load the user profile

    I received the following message when I try and log in my account to have:

    The user profile Service service has no logon failed to load the user profile

    What are my options?

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Error during indexing account administrator-"the user profile Service has no logon. Unable to load the user profile.

    Original title: I can't connect to my admin account
    Windows 7 - whenever I try to login on my admin acc it appears ("service user profile Service does not have the logon - user profile cannot be loaded") and do not know what that could have been and how to solve this problem, I have not tried anything yet if someone can please help me. I also connect to a standard ACC and cannot do anything because when he asks me my admin pass I put it in and nothing happens.

    Hello

    This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

    Run the diagnostic tool for Fixit for the article mentioned below and if it solves the problem.

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon.
    Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Let me know if you need more assistance.

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "The service user profile Service has no logon. User profile cannot be loaded. »

    When I try to log on to my site its tell me what; "The service user profile Service has no logon. User profile cannot be loaded. »

    Hello cockateils8,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try the rest of the stage in this article:

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    To resolve this issue, follow these steps:

    1. Delete the profile by using the computer properties dialog box. To do this, follow these steps:

      1. Click Start, right-click computer and then click Properties.
      2. Click on change settings.
      3. In the System Properties dialog box, click the Advanced tab.
      4. Under user profiles, click settings.
      5. In the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
    1. Click Start, type regedit in the start search box, and then press ENTER.
    2. Search for, and then expand the following registry subkey:
      HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    3. Right-click the SID that you want to delete and then click on remove.
    4. Log on to the computer and create a new profile.

    Pasted from http://support.microsoft.com/kb/947215>

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for