Set request variable without prompting

Similar Questions

• [ADF, JDev12.1.3] How to set a variable to bind a VO (where clause) in a managed bean?

  Hallo,

  I have a request based on VO.

  The query contains a where clause clause and a bindi variable.

  In a managed bean I would like to access the iterator of VO setting the value of the bind variable and read the result.

  I found this code it is good start, but I do not know how to set the variable binding.

  BindingContext bctx = BindingContext.getCurrent();
  BindingContainer bindings = bctx.getCurrentBindingsEntry();
  DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("MyVO1Iterator");
  iter.execute();
  
  
  

  You kindly help me?

  Also, I would like to know if it is generally advisable to use VO directly in controlled beans or whether it would be best to create in the AppModuleImpl methods that do this and return the result.

  In my case for example of the VO will return max 1 plug so I'm in doubt, if the creation of a method in the AM that returns a custom class, which attributes contain values of the line of VO.

  Sorry if these questions may seem artificial, but I am a beginner, I have many doubts and so I would be happy to receive some tips regarding best practices.

  Thank you

  Federico

  You can use:

  iter.getViewObject().setNamedWhereClauseParam("yourBindVar", value);
  

  Note that this approach is used if you have bind variable in the where clause.

  To set variables bind to ViewCriteria, you must use VarableValueManager.

  This post may be useful for you: binary: how to set the Bind variable values at run time?

  Also, I would like to know if it is generally advisable to use VO directly in controlled beans or whether it would be best to create in the AppModuleImpl methods that do this and return the result.

  You must set "use VO directly.

  For example, from the point of architecture, is probably best to use the method in the model project which will set the bind variable and execute the query.

  Or you can use the ExecuteWithParams operation in your the view layer.

  In my case for example of the VO will return max 1 plug so I'm in doubt, if the creation of a method in the AM that returns a custom class, which attributes contain values of the line of VO.

  Not to complicate your life

  All VO lines are represented as ViewRowImpl class if you already have "custom class".

  Finally, you can generate your own ViewRowImpl class if it is necessary for this.

  Dario

• SET the VARIABLE problem

  Hello world!
  
  I added a line to my report of responses on the tab advanced, prefix section as follows:
  SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1;
  
  I also put a session variable by using the dashboard line. Then when I start my report, you receive the following error message:
  
  A general error occurred. [nQSError: 27002] About < GAME >: Syntax error [nQSError: 26012]. (HY000)
  
  Publ. SQL: SET VARIABLE sv_test = "Test"; SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1; SELECT...
  
  So, the first SET statement is generated from Dashboard prompt and the second section of a throug prefix. I also tried to exclude 'SET the VARIABLE' section of my report prefix, but it still does not work. What is the correct syntax?
  
  Help me, please!
  
  TNX!

  user10203008 the error is in a semi instead of the comma
  SET the VARIABLE sv_test = "Test"<; !comma="" have="" to="" be="" here!="">SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1;

  So you can do this quickly with variable pvVar presentation. And a prefix write
  * SET VARIABLE sv_test='@{pvVar}',SET VARIABLE DISABLE_CACHE_HIT is 1 DISABLE_CACHE_SEED = 1;. *

  It must works.

  Published by: AnTonic January 26, 2011 12:23

• Request variable

  I got an email that get generated and sent to #request. SiteSupportEmail #. I searched throughout the whole of the code to find out where this variable is defined but can't. I need to make changes to the email. How to find it.

  < intrusion via cfmail to = "#request. "" SiteSupportEmail # "=" "#xxx #" subject = "#XXXXXX #" type = "HTML" >

  < / intrusion via cfmail >

  Look for the variable in the application.cfm file. It could be placed anywhere, but it's a good starting point.

  Also use a search function in your editor to search for all references to that variable.

  If you're at a total loss and must make a fixed fast and dirty, just set the variable to whatever you want just above your code with a CFSET.

• need to change the value of variables without deploying

  I need to code of values to variables and need to change the value of the variable without redeploying code.

  BPEL properties
  It is possible to have properties set in the BPEL process. Properties are set on a global scale and outside the BPEL process. The properties are accessible via an internal function.

  In the bpel.xml file, add the following lines just before the end of:

  
  [email protected]
  

  Properties are available in the BPEL process (.) BPEL file) via the function ora: getPreference():

  Ora:getPreference('propertyEmailAdress')

  You can change this value in console deployment descriptors

• How to set up a default value when setting (request) a value?

  When I ask the user in a SQL statement, then I can declare a default value as in:
  
  SELECT *.
  Of all_users
  WHERE username = nvl ('& $myvariable ',' SYSTEM');
  
  But when I set a variable that it does not work:
  
  set the tablename = nvl ('& tablename test123 ',' ')
  
  How can I configure a default here?
  
  Peter

  Is there a way to set a default value DIRECTLY in SQLplus DEFINE command (and not later, when the value is used in the SQL statement)?

  No, there is not to DEFINE them, but you can use ACCEPT:

  SQL> accept tablename prompt 'Enter value for table Name:' default EMP
  Enter value for table Name:
  SQL> select column_name
    2  from cols
    3  where table_name='&tablename';
  
  OrderNumber=1234
  COLUMN_NAME
  ------------------------------
  EMPNO
  ENAME
  JOB
  MGR
  HIREDATE
  SAL
  COMM
  DEPTNO
  
  8 rows selected.
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

• Set a variable in an expression of post

  I have a test loop and if one or several tests fail, I want to set a variable 'fail', that I can use at the end of the loop to a sheet of summary data.

  In pseudocode, I want:

  If step.result.status == 'failure '.

  then failure = 1

  There is no further action so the? : operator does not seem appropriate, but I don't see any option IF. So should I write something like:

  (step.result.status is "Failed")? (locals.failure = 1): (locals.failure = locals.failure)

  ?

  Thank you

  JVH

  
  

• variables without indicators and controls

  Hello

  Is there a way to create a variable without having an indicator or a control in the front panel. I want just to save and update the data in the block diagram.

  Thank you

  Venkat Rao

  
  

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How to set a variable to a string with special characters?

  I want to set a variable

  < cfset inputstring = "< img src ="... /... /.. "/ Server/Win/Form/Stamp/string_1" / > "/ >"

  but I get the error message:

   Invalid CFML construct found on line 184 at column 32.
  ColdFusion was looking at the following text:
  
  
  .
  

  I try different ways, what I am, I am doing wrong?

  You must escape the inner quotes or mix single and double quotes.  Try:

  "/>

  or

  Oh, and oblique aft are not necessary in the tag.

  -Carl V.

• Setting a variable that I can call it from any symbol value.

  Hey everybody!

  I'm working on a lively game of edge and I'm learning I'll you can tell

  The way I put it in place is that I have a container that contains different symbols depending on the button you clicked on. They symbols open up to a deep part of the game.

  However, I want to be able to define a variable on the stage that I can handle later when different symbols are open.

  What I have so far is my limited understaning of jquery, in the scene that I'm leaving by setting a variable

  var variable1 =     5,
    variable2 =     10;


  Then in my symbol I want to be able to do something like this

  
if(variable1 > variable2) {

  Then do something

  
}
else {


  Then do something else
}

  }

  Variable1 = 10

  variable2 = 5

  However the problem I'm having is that when I put the value of the variable in time the name of the variable value and whole isn't rememembered in the symbols.

  So is there any code I could write in symbols that can call the variables defined in the scene in the symbols.

  I thank very you much for any help. It is greatly appreciated.
  

  Hi, I have solved literally just this problem for me! I was unable to include variables in the symbols to remember too. It will be familiar if you have access to the care of in a symbol, like this (this kind - of takes a step backward and takes you to the main stage of symbol):

  sym.getComposition () .getStage ().$("anElement").hide ();

  How I updated the score (shown on the stage) to in a symbol, it's to GET the variable from the scene:

  var score = sym.getComposition () .getStage () .getVariable ("score");

  score += 100;

  sym.getComposition () .getStage ().$("valueDisplay").html (score);

  sym.getComposition () .getStage () .setVariable ("score", notes);

  So for you I recommend you:

  var variable1 = sym.getComposition () .getStage () .getVariable ("variable1");

  var variable2 = sym.getComposition () .getStage () .getVariable ("variable");

  if(Variable1 > variable2) {this}

  Else {who}

  If you want to update the variables and store them on the scene, then you'd in the same way:

  Variable1 ++;

  sym.getComposition () .getStage () .setVariable ("variable1", variable1")

  I hope this helps, I am not 100% and it can be better explained as I learn I will myself!

  Ray

• Forms 11 - setting a variable in formsweb.cfg can get its value

  Hello
  
  I need to read .pdf documents stored on a web server using WEB forms. SHOW_DOCUMENT();
  It is web server for dev environment and another for production.
  They do not have the same URL.
  So I need to set a variable in a configuration file in both environments.
  Unfortunately it seems that forms such as getenv functions do not provide much information.
  Right now I use something else, I get the name of the database of database v$, but the DBA is not enthusiastic about the subject to give read permissions to users in production.
  
  Thanks a lot for your help.

  Hello

  The value of the variable in the /forms/server/default.env file

   ...
   my_var=...
  ...
  

  Then, get the value at run time with the Tool_env.getvar () procedure.

  declare
    v varchar2(512);
  begin
    tool_env.getvar('my_var', v);
  end;
  

  François

• need to set env variables

  OS: Linux5
  DB: oracle10g
  
  I connect to my server with PuTTY.
  $export DISPLAY = MYIP:0.0
  Doesn't not help me, tried many things by google
  any suggestoin...
  
  Kind regards

  1. you must install a X-Windows Server on the computer that you connect from.

  for example MobaXterm (free and standalone application) http://mobaxterm.mobatek.net

  2. configure your firewall to allow to communicate over port TCP 22 (ssh)

  3 connect using SSH with X-transfer to the remote computer.

  for example ssh x oracle@remote_computer.

  When you use ssh with X-Forwarding you do not set the variables of any VIEW manually -'s done it by ssh. You do not have use xhost to configure server access control. The remote server connects to the X-Windows Server on your client computer to display the application-X window. To test the xclock type.

• Use the button to set a variable

  Hi, can someone help me.

  I would use a couple of buttons I made to set a variable. I would use the name of the instance of the keys as the value stored in the variable. How can I code this?

  Thank you.

  You can use the currentTarget of the event to target the button and acquire its name...

  var btnName:String;

  btn.addEventListener (MouseEvent.CLICK, storeName);

  function storeName(evt:MouseEvent):void {}
  btnName = evt.currentTarget.name;

  trace (btnName); will trace "btn".
  }