Set the event level 38041 16

Similar Questions

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• Setting the isolation level

  Hello
  
  I converted our application of transaction is not entitled to use transactions. I want to reduce the impact on performance, I setup some transactions to some lesser isolation levels. As I understand the documentation, the General method to do is to set the isolation level appropriate in TransactionConfig when you create a transaction.
  
  But what I see in the documentation, it is possible to PrimaryIndex.get () third (lockMode) parameter allows you to specify isolation for the specific operation as well.
  
  So my question is: what are the disadvantages of configuring isolation per-operation compared with the isolation by transaction configuration and accessories?
  
  I.e. I'm considering the approach which is better:
  
  1.
  ----
  TransactionConfig txnConfig = new TransactionConfig();
  txnConfig.setReadUncommitted (true);
  Transaction txn = myEnv.beginTransaction (null, txnConfig);
  for (id: idList)
  {
  primaryIndex.get (txn, id, null);
  }
  ----
  
  2.
  ----
  Transaction txn = myEnv.beginTransaction (null, null);
  for (id: idList)
  {
  primaryIndex.get (txn, id, LockMode.READ_UNCOMMITTED);
  }
  ----
  
  In general, I understand that specifying the isolation on a basic per-operation probably was to be used as a tool to locally modify the General transaction as a parameter
  
  3.
  ----
  TransactionConfig txnConfig = new TransactionConfig();
  txnConfig.setReadUncommitted (true);
  Transaction txn = myEnv.beginTransaction (null, txnConfig);
  for (id: idList)
  {
  primaryIndex.get (txn, id, id == 5? LockMode.READ_COMMITTED: null);
  }
  ----
  
  but I want to know if the 2nd approach is legal and that it would not lead to some bad consequences.

  Mikhail,

  Blocking rules described in http://www.oracle.com/technology/documentation/berkeley-db/je/java/com/sleepycat/je/LockMode.html will help you to understand the interaction between operations and blocking rules. From there, you should see that specification of a lock at the level of the operation mode cancels and replaces all other levels of specifications.

  In general, I understand that specifying the isolation on a basic per-operation probably was intended to be used as a > tool to change the setting of General transactions such as locally

  Exactly, it's just an option of the API.

  When you ask if (1) or (2) is better, both are equivalent, although it seems unusual that a transaction where you always choose to use READ_UNCOMMITTED. However, there are no differences in efficiency, and the choice must be made of the way in which it matches your code.

  Kind regards

  Linda

• Set the events in oracle 11g for SAP

  Hi all
  
  Recently, we have updated 10.2.0.4 oracle database at 11.2.0.3 (AIX 7.1) for the SAP application.
  
  Some settings of the default event have been set when the database has been executed with 10.2.0.4 version. After upgrading to 11.2.0.3, these events have not observed pfile/spfile. However, the post_upgrade log shows that these events have been defined (and journal displays a list of events as well).
  
  Now, my concern is whether the settings of the event have been put already by default (if it is already set after upgrade, don't know why pfile reflecting is not them) or do I have to adjust the settings manually.
  
  Thanks in advance for your help.
  
  Kind regards
  Prakash

  See SAP Note 1431798 for a list of the parameters of the event required. These are correct. You must also run the last Patch Bundle SAP that specifically tells you to set these events after the installation of the hotfix. If you have run the wrapper of dbua SAP by their 11g upgrade instructions, I think that it defines these events for you as well.

• Set the zoom level

  I use a version of Adobe Reader X 10.1 on Windows.

  I put the zoom level in the preferences. Display of the page. Zoom to 100%. I save it. I close the PDF that I consult. I open the PDF file. The PDF file appears in the zoom level, 72.3%.

  Why is it so difficult to get the right for Adobe Reader? This problem has persisted to all versions of Adobe Reader, I used because the product was created. It's not rocket science, the Adobe developers. Do you think that you can get this correct before the end of the Earth a few billion years down X on the line.

  Eddie

  If you open a document that you have seen before (and I can really see how it would be frustrating to have to keep resetting the zoom in this case), there is an adjustment, you can do. Go in Edition > Preferences > Documents and select Restore last view settings, when the reopening of documents. This affects only reopened the documents, not open but I think it works even with files that are no longer on the list of recently used files. This setting will remember your configuration level and the Tools/pane zoom bar, at least, a moment to another. I can't swear that it replaces a creator-set default zoom, but it might be interesting to try.

• How to set the entry level of voiceover?

  Hello

  I use Soundbooth to record my voiceover work. My equipment includes a MacBook Pro and a Samson CO1U microphone. It doesn't seem to be anywhere to adjust the input level (record). There is a setting of the slider in the Audio (Soundbooth) dialog box that you can access when you press record, but the slider itself is not accessible (i.e. When you try to drag, it is locked, and nothing happens). Anyone have any ideas? I would really appreciate it!

  Thank you

  Vixter

  Sounds good!  I'll have to ask one of those for the laboratory.

  Have a nice day

• set the warning level

  Hello
  in 10g R2, DB control, how to set the threshold of warning (for invalid objects) to a value greater than 1.
  
  I tried here:
  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40002.PDF
  
  but can not find.
  
  Thank you.

  In the grid of the OEM, for those license correctly, you use DBMS_SERVER_ALERT
  http://www.morganslibrary.org/reference/dbms_serv_alert.html

  If this works for DBConsole, and whether you can do it legally without the diagnosis pack is something you should check out
  before trying except in dev.

• Set the zoom level for all open documents

  I work with 2,3,4,5 and 6 open documents in Photoshop CC 2015.1.1 at a time.

  What is the easiest way to create a script that gets the number of open documents and defines a specific zoom on all open documents level?

  Basic workflow

  1. select images in Bridge

  Images of BR 2 - open in Photoshop

  3 - Photoshop > > window > > mosaic all vertically

  4 - run script defined zoom level

  The script must treat all documents open that not only active in operating the scipt.

  If (! documents.length) alert (' there is no open documents.) ', ' No. 'Document');

  else {}

  var saveActiveDoc = app.activeDocument;

  for (var i = 0; i)

  app.activeDocument = documents [i];

  runMenuItem (app.charIDToTypeID ("ActP"));

  runMenuItem (app.charIDToTypeID ("ZmOt"));

  runMenuItem (app.charIDToTypeID ("ZmOt"));

  }

  app.activeDocument = saveActiveDoc;

  }

• Forbidden: Variables of level object in the event handlers?

  Hello world

  So I thought I had a pretty good handle on works the scope in Java, but for some reason any that a sentence in the Identity development documentation Manager is causing scratching me my head:

  28.3.1.1 development considerations

  [...]

  
  

  * Do not set the object level variables in the event handler.

  What exactly do you think they mean by that? Are we supposed to initialize variables, avoid new methods?

  All instance variables? I mean, that cannot be because how you can write useful code without instance variables?

  Or is it just an injunction on the locking and safety of threads?

  Thanks in advance!

  -Mark

  Here object variable average instantiate every variable which is at the level of the object.

  This is the reason for this:

  Once in the case of recon user gets into the loop to break out of loop only when the reconciliation of the users is made and so if you have instantiated any variable to the object variable and then after a user the value of this object will not get instantiated and will choose ythe value what first user changed.

• Custom event is not captured by the Task Scheduler and unable to trigger by e-mail for the event

  Hello world

  We have installed the 9.0 table in our windows 2008 R2 server and Scheduler tasks to send if you find error occurred for the application in it. That's why we created SMTP inside. First, we have implemented the Task Scheduler and generate an error in the application of the table and run the task manually and we receive by e-mail. But when we go for automation by the custom event. The steps below that I follow:

  1. click the Start button, and then select administrative tools > Task Scheduler.

  2. click on the task of creating in the Actions pane on the right.

  3. in the dialog box create a task in the name text box, type a name for the task and provide a description if you want.

  4. in the section security options, select run whether user is logged in or not.

  5. click on the triggers tab, and then click the new button.

  6 to start the task drop-down list, select an event.

  7. in the settings section, select custom and click the new event filter.

  8. for the event level, select the error box.

  9. selection of the Source, in the event source drop-down list, select the table server checkbox.

  10. click OK to close the new dialog box even filter and then click OK again to close the new trigger dialog box. The event trigger is now configured.

  11. in the dialog box create a new task, click the Actions tab and click the new button.

  12. in the Action new dialog box, in the drop Action, select send e-mail.

  13. under the settings section, fill in the form as required, including the SMTP server.

  Note: It is necessary to enter the valid e-mail addresses in the From and to text boxes.

  14. click OK to close the new dialog Action.

  15. click OK to close the dialog box create a task and finish configuring e-mail alert.

  If please see this and feel free to contact me if you have any information.

  Concerning

  Valerie

  Mob: 469 345 3625

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problem to get the startup-config under the privilege level

  Hi guys

  I use the level of privilege 15.2 and in this version, that I can not get the startup-config under some of IOS (in this case, IE 7)

  I have no problem to get it from the earlier version, also to 15.1

  Router #sh privileges

  Current privilege level is 7

  Router #sh startup-config

  With the help of 4414 262136 bytes

  % Error opening nvram: / startup-config (Permission denied)

  Config:

  privilege exec level 7 show startup-config

  privilege level exec 15 see the configuration

  show privileges exec level 1

  When I added cmd ' privilege exec level 7 show startup-config ', IOS generated automatically new line "privilege exec 15 level show configuration.

  seems that there must be an "improvement" under versions of 15.2

  Any ideas?

  Thank you

  Pet

  Hello

  I have faced the same problem and opened a folder. Please find the answer I get from the TAC:

  ==============================================

  This is designed by design as a security measure. Starting in the new versions of IOS, the privilege level of access to system files must be configured separately. There are two options to solve this problem:

  (1) run the command at the prompt to activate it.

  (2) set the privilege level of the file system via the config command "file privilege X" with X the number of privilege level

  ==============================================

  Hope that helps.

  Best regards.

  Karim

• Disable the logging level for individual users

  Hello

  We want to stop individual users to record level. Usually, we go to identity and click on the user to set the log level '0', but we have LDAP security settings don't so have no idea how to do.

  All ideas

  Thxs

  SYK

  LDAP?

  Still, you can see the RPD users when

  IM-> Action-> Set Online user filter specific user

• Setting uniform volume level

  Is there a way to Pr Pro to adjust the volume of all the clips at the same level to share directly adjusting the volume of each clip?

  You have reason, normalize sets the peak level of the clip to all what value you select.

  This necessarily does not what you want-a clip that is more often sound quite low level, with only one strong (for example, a shot of a peaceful Lake where a Mallard suddenly let rip near the camera) fits with the other standard clips taken at the Lake even when it was just the usual waterfowl background chatter.

  In the first clip to that cry of duck will be fixed say-6 dB, while the bottom may be at-20 dB.  Other clips, the bottom is at-6 dB because it is actually the peak level.

  What I usually do is use a hearing to fix the bottom of each clip to the same value and for the rafale occasional overloud apply selectively cut at the same level to keep the pic within the limits.

  Beware also the "pumping" effect you get when automatic gain control is activated in the camera - after explosion of Donald, there will be clearly audible in the short-term decrease in audio level.

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• How can I verify and change the system set trace events?

  Hi all:
  How can I check that the system set trace level events? I don't want the big alert_log.
  
  
  
  
  
  Concerning
  Terry

  To disable the use of the event

  ALTER SYSTEM SET EVENTS '20 trace name ERRORSTACK OFF';
  

  HTH
  Srini