Set the network settings on Coredump PowerCLI problem

Similar Questions

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Even though I have my iPad WiFi connects to the internet even after that I have reset the network settings

  Having never had a problem with my iPad since buying about 3 years ago, suddenly I can't access the internet use it & none of the applications that need the internet have access either. (since the last update for IOS 9.3) I have reset the settings of the internet and the WiFi signal at the top is visible. Airport app told me that I have access to the internet, but I did not!  Does anyone else have this problem? I would really appreciate a quick solution, because it's so annoying when things sync and I need them to-such as the events of diary, photos email etc. not to mention the SMS!  Any help gratefully received!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Reset the network settings

  My network connection to internet is good.  But the MacBook can't connect. How do you reset the network settings.

  Follow the instructions in this thread How to reset network settings completely a Mac?

• set the proxy settings

  I support approximately 1,000 customers and my manager has approved the use of FireFox with a condition that we put a proxy and it is whenever a user starts Firefox. I would like a VB Script that affects the proxy settings every time you start Firefox. I think that this could be done when the customer starts a script, the script sets the proxy settings and then launches the firefox program. Any suggestions or ideas would be appreciated.

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

  See also:

  • CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/

• Photosmart b209a more: how to change the network settings?

  I have this printer on a wireless network connection. In a few weeks will change my broadband service, which is to get a new router. Is there an easy way to change the network settings for this printer to connect to the new router, without having to reinstall the printer software?

  Here's what you need, your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-plus-all-in-one-printer-series---B2/3777155/model/3777156/drivers

• How to set the SafeSearch settings in the Bing app?

  When you use Bing, how to set the SafeSearch settings?

  SafeSearch settings is accessible through settings App / in Bing SafeSearch.

  SafeSearch (and all the measures taken within SafeSearch) parameters are NOT shared with bing.com experience.   For example, you can have SafeSearch within the app set to OFF, but have the same function moderate to bing.com experience value.  In other words, these settings are not shared across app & bing.com experience.

  For more information on the experience of bing.com, see this article: http://onlinehelp.microsoft.com/en-us/bing/ff808441.aspx

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• How can I change the network settings and air play setting up the itunes which is running on my laptop (windows 10)

  A few weeks ago, I was streaming of photos to my TV using my apple TV. Now, whenever I try to play music in my laptop itunes I get the error message "the airplay APPLETV device is not available," he goes on to say "Please check your airtime... configuration and network settings. "I searched for days for these parameters.

  Now the itunes on my laptop has no audio data.

  The only way I can hear the track I'm playing, is to select the option at the foot of the error message that says "use this computer for now" - this gets quite annoying after awhile!

  any suggestions?

  Thank you.

  Hello [email protected],

  I understand that you encounter some problems with the sound settings on your PC after using a home since iTunes for Windows sharing.   The resources below has some basic for home sharing troubleshooting. Specifically, I would say the software updates, cycling the power to the modem/router and check the sound settings in Control Panel to do the internal speakers are of course selected.

  Get help with sharing at home

  Where is the control panel?

  Take care.

• Cloning of the network settings on the printer - Smart zero 4.4 clients using Xen

  I ran into an issue trying to implement for thin client network printers Smart zero with the build Z6X44017 (same question for with prior build 4.3; same question for T520s, T610s, T620s): If the printer is set by the 'user' account in the HP printer Mapping utility, it does not pass by in a published desktop, XenApp as a printer available to all.  When changing the account 'user' to the 'administrator' account, the printer is listed in the printer mapping GUI.  But it is not available on the published desktop.

  However, if the printer is CREATED or MODIFIED by the administrator via the GUI HP printer Mapping on the Xen login Panel, then it is displayed as the default printer on the published desktop.

  As we seek to implement dozens of devices at once with the same network printer queue defined, it would be useful to set up once and then clone the settings.

  Here's what I've done so far:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device using a task of 'files and records.

  3. apply these registry via the job template settings to the target group of devices.

  It works very well with regard to obtaining the printer to display in the GUI of the mapping of the printers on the Xen login Panel.  However, the same problem exists: unless I go again in administrator mode in the GUI and the Edit/save the printer, it is not available on the published desktop.

  A possible solution might be to run a job to 'validate' the printer settings via a program that could be run from the command line, but I can't find such a program in the file system for the Linux client.  It's just a bug in the configuration of the printer, or a limitation of this printer MUST be configured via the GUI only?

  

  The local HP sales engineer for thin clients was able to track down the command of "committing" the printer settings after running the registry task to copy the settings.  It is run as a task of type Script as a template file and registry.

  Here is the command to run in the script:

  /usr/share/Manticore/plugins/printer-mapping-Mgr/wrappers/apply.sh "root/printer-mapping-mgr.

  It can be added as the second subtask under the task of file & registry.

  The complete solution is:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device by using a "file and registry" tasks and save it as a template

  3 edit the template to add a second sub-task of Script to run the command ' root/printer-mapping-mgr ' /usr/share/manticore/plugins/printer-mapping-mgr/wrappers/apply.sh

  4. run the task of file & registry model against the target devices.  This model will then apply these registry settings for the group target devices and run the script to validate the changes on the target devices.

• How to reset the network settings after an international trip

  I got an iPhone 6 overseas and had to do a manual network setting to use my phone.  now that I'm back in the USA, I need to know how to make it back to my home carrier for network settings.

  Hello

  GoTo settings reset network settings after reset entered your key wireless router.

  Also check the time settings ensure its self on.

  See you soon

  Brian

• HP 15-ac152sa laptop: wifi tab disappears from the network settings menu. Unable to connect to wifi

  I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection available.

  On the tab "network and internet". There is no tab for WiFi. Initially, I managed to fix it by clicking on the 'network card', 'properties' and on the 'power management' tab, I unchecked the box indicating "allow the computer to turn off this device to save power. This fixed the problem... until the next time I turned on the laptop. It's the same thing and I am unable to connect to internet via WiFi.

  The single adapter in the list here is "Realtek PCI-e FE family controller #2". Still unable to connect to WiFi... Still no WiFi tab under settings "network and internet". Help, please!

  So, the problem was finally solved (fingers crossed!).

  Yes, the Internet access worked perfectly every time when it is connected through the Ethernet cable. Ultimately I phoned the helpline. They checked for the new driver updates (these have been already updated), restored the BIOS remotely and then restored the device to the factory settings. Start of the fault still took place intermittently. This indicates a hardware problem, and the unit was sent for repair.

  The idea was that when the WiFi did not work, the WiFi card wasn't physically visiable in the list of available adapters, nor has the Bluetooth adapter. Apparently in this device, the Bluetooth and WiFi functions are on the same network adapter and apparently those elements should not disappear from the list of available adapters. So the fact that they disappeared together intermittently indicated a hardware problem with the card.

  Now that I got my laptop back and I think that the WiFicard has been replaced. Hoping all is well now and I hope this post helps someone else.

  Thanks hp for fast and wonderful customer service.

  Sarah

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• Help to change the network settings on the guest account

  On my internet guest account worked very well, is not working anylonger. I tried the administrator account to change network settings, the guest account, but the only option I have is to change the image and to deactivate the account.

  Can someone help me please?

  Thank you.

  Hello
   

  1. What are the changes that you made before the show?
  2. what happens when you try to access the Internet?
  3. were you able to access the Internet with your admin account?
  4. do you have an error message?

  Method 1:
  I suggest you do the networking in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:
  I also suggest you to return the item.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 3:
  Follow these steps:
  a. create a new user account and see if the problem occurs in the newly created account.
  b. If the problem does not persist in the new user account, it may indicate that your old user account is corrupted.
  Access the link below and follow the steps to repair the corrupted user profile:
  Difficulty of a corrupted user profile

• PC won't start after setting the default settings in the bios of the a10

  I installed the new bios a10 in order to try to get my new gtx 970 graphics card works, after that the card has not been recognized so after a little research I tried a solution by setting the default BIOS settings. I did this but now whenever I start it says that there was a problem and has the:(face et redémarre en un continue le cycle.) I then put the previous gtx 750 working back in and the problem persists while I can't all my dell xps 8700. Did someone knows how to fix the problem starting and also nobody knows why it was not recognizing my new graphics in the first place. Any help is greatly appreciated thank you.

  Probably the SATA Configuration has lack of AHCI. If your configuration is a small SSD cache drive, then you will need to change to Intel Smart Response Technology:

  http://dellwindowsreinstallationguide.com/ensure-you-have-the-correct-SATA-configuration-in-the-BIOS-Setup-for-your-configuration/SATA-operation/