Set the value of selectOneChoice managed Bean

Similar Questions

• Setting the value of selectOneChoice to run

  Hello
  I need set the value of selectOneChoice at run time. During the loading of the Page I am creating RichSelectOneChoice object and currencyCode.setValue ("USD");
  When I check on the length it does not show 'USD' as element selected in the drop-down list where as background it sends USD for application downstream.
  How to get the SelectOneChoice value show that is selected at run time in code?
  
  Thanks in advance.

  Have you abandoned the currencyCode in the data control palette (in which case the selectitems will be generated index as values), if so, to set objective test the index as a default and see if it shows the correct value.

  If you wan to have values rather than indexes, you can use forEach. See this [forum post | http://forums.oracle.com/forums/thread.jspa?threadID=938840] for the sample code.

  Jean Lou

• Setting default value for selectOneChoice when the Page loads

  BPM JDev 11.1.1.5.0
  
  I have a selectOneChoice component bound to a BPM data control. You need to set a specific value as the default value when the page is loaded for the first time.

  I did the scope of the bean managed as pageFlowScope.
  Then created a variable of string in the bean called 'postal code' and its setter I wrote like:

  You can follow this approach as well. But when you call the countryCode setter? You must set the value of the variable string.

  Then, I used your code in the jspx page.

  You need to edit my code in the jspx you use a managed bean. The code will change as below.

  I was suggesting to use a variable of pageFlowScope as defined in my previous code snippet. And on pageload, set this variable. To find out how to write/execute java code before page loads refer to this post:
  http://www.baigzeeshan.com/2011/05/How-to-run-Java-code-on-every-page-load.html
  In the afterPhase of the post method, you can set the variable pageFlowScope as shown below.

  AdfFacesContext.getCurrentInstance().getPageFlowScope().put("countryCode", "IndiaIN");
  

• How to set the value derived in the bean messagechoice

  Hello

  I have a requirement to set the value derived in messagechoice.

  Need help in this

  Kind regards

  Kalai

  Good answer:

  String stmt =

  "Start: 1: = xxcust_eam_oaf_extensions.get_wo_priority(:2,:3,:4); end; « ;

  CallableStatement cs = txn.createCallableStatement (stmt, 1);

  try {}

  cs.registerOutParameter (1, Types.VARCHAR);

  cs.setString (2, OrganizationId);

  cs.setString(3,RequestNumber);

  cs.setString (4, consequences);

  CS. Execute();

  Priority string = cs.getString (1);

  pageContext.putDialogMessage (new OAException ("priority value:" + priority));

  If (priority! = null) {}

  pageContext.putDialogMessage (new OAException ("inside the loop if"));

  String query = "select lookup_code from the mfg_lookups where lookup_type ="WIP_EAM_ACTIVITY_PRIORITY"' and sense =: 1 ';"

  PreparedStatement stmt1 = conn.prepareStatement (query);

  stmt1. SetString(1,Priority);

  ResultSet resultset = stmt1.executeQuery ();

  If (resultset! = null) {}

  While (resultset.next ()) {}

  If (resultset.getString (1)! = null) {}

  String lookupcode = resultset.getString (1); here for the extraction of the column in the query

  OAMessageChoiceBean xxPriority = (OAMessageChoiceBean) webBean.findChildRecursive ("Priority");

  xxPriority.setValue (pageContext, lookupcode);

  }

  }

  }

  }

  }

  {} catch (SQLException e1)

  throw new OAException (e1.getMessage (), OAException.ERROR);

  }

• How to reset the value of selectOneChoice when it is af:table

  12.1.3 Jdev

  I need to reset the selectOneChoice of the first empty value when you click a Refresh"" button.  The selectOneChoice is located in one of the columns of af: table.  I tried to reset by getting the selectOneChoice component and set the value to «»   Please see the snipplet of code for more details. However if the selectOneChoice is not within the af: table, then using the same way to reset works!

  in jspx

  	"< af:commandToolbarButton id ="ctb15"icon="/images/refresh_qualifier.png "shortDesc ="Refresh"action =" #{viewScope.backing_requestOverview.onRefresh} "partialSubmit ="false"> < / af:commandToolbarButton >"
  	< af:table value = "#{bindings." ItasTaskAssigneesListVO1.collectionModel}. var = "row". lines = ' #{bindings. " ItasTaskAssigneesListVO1.rangeSize}. emptyText = "#{bindings." ItasTaskAssigneesListVO1.viewable? "{'No data to display.': 'Access Denied.'}". fetchSize = "#{bindings." ItasTaskAssigneesListVO1.rangeSize}. rowBandingInterval = '1' id = 't4 '. styleClass = "AFStretchWidth."

  columnStretching = "column: c1.

  rowSelection = 'single '.

  selectionListener = "#{bindings." ItasTaskAssigneesListVO1.collectionModel.makeCurrent}.

  selectedRowKeys = ' #{bindings. " ItasTaskAssigneesListVO1.collectionModel.selectedRow} ">"

  < af:column id = "c6" headerText = "Action".

  rendering = "#{bindings." EventLevelTypeCode.inputValue! ' = ' 10 G ' & amp; & amp;! viewScope.backing_requestOverview.isReadOnly} ">"

  < af:selectOneChoice id = "soc2".

  autoSubmit = 'true '.

  valueChangeListener = "#{viewScope.backing_requestOverview.onChangeMyPendingAction} '"

  Disabled = "#{!}" line. TaskActionEnabled} ">"

  < f: selectItems value = "#{backing_requestOverview.actionsMap [row." StatusUid]} ".

  ID = "si3" / >

  < / af:selectOneChoice >

  < / af:column >

  < / af:table >

  < af:selectOneChoice id = "soc222" >

  < af:selectItem label = "Complete"

  value = "COMPLETE"

  ID = "si4" / >

  < af:selectItem label = "Assign".

  value = "ASSIGN".

  ID = "si555" / >

  < / af:selectOneChoice >

  Java bean:

  public String onRefresh() {}

  RichSelectOneChoice actionDropdown = (RichSelectOneChoice) JSFUtils.findComponentInRoot ("soc2");

  actionDropdown.setValue("");

  RichSelectOneChoice actionDropdown2 = (RichSelectOneChoice) JSFUtils.findComponentInRoot ("soc222");

  actionDropdown.setValue("");

  If (actionDropdown! = null) {}

  AdfFacesContext.getCurrentInstance () .addPartialTarget (actionDropdown);

  }

  If (actionDropdown2! = null) {}

  AdfFacesContext.getCurrentInstance () .addPartialTarget (actionDropdown2);

  }

  }

  Please notify.

  Thank you

  -Mina

  The root of the problem remains the same. As long as you don't set a value for each of SPC property that you use, you cannot reset them without running into trouble.

  An soc within a table must be stored too, you must provide the form of attribute value each of them. If you only use a soc, to distinguish the action to take, it belongs in the table.

  Timo

• How to use PL/SQL to create dynamic action to set the value of a selection by another list?

  Hello

  I would like to know how to use PL/SQL to create dynamic action to set the value of a list of selection by another selection list.

  

  I wish can create dynamic action to manage the two above the Room select list (: P9_ROOM) and building (: P8_BUILDING).

  When you select "1074" in the bathroom, building highlights like "BRM BLD 5"

  When you select 'Area of the black box' in the room, building must assign the value "7 BLD BRM"

  When the room is Null, building should also be Null.

  I thank you,

  Alice

  I forgot to mention, for the PL/SQL Code, because you are working with items in the selection list, the return values are different from the display on your LOV values, you must instead use the return values.

  Thank you

  Erick

• dynamic action sets the value of the element, but not save to DB on submit

  I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action.  They are set when the user selects a value in a list of selection (and is based on the value of the selection list).  Dynamic action is triggered on a list selection change event and then runs the real action "set the value.  The selection list displays the names of sales representative.  The three fields dynamically filled are the org structure (that is, their chain management).

  For the action to set the value, I use a defined Type of SQL statement:

  Select VP, DIR, MGR

  of SALES_ORG where SSR =: P20_SSR

  In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.

  Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three).  This page is a form in which the user submits information relating to the rep.  When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above.  These fields get the values NULL.

  When the dynamic action updates the values in the three fields is - it does not set the value of session?  Why these fields don't are not taken into account in the submit other ideas > process Page?

  I use 5 APEX with Chrome on Mac (Yosemite).

  Thanks for the note.  I didn't only display the items could not be used in this way.  I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form.  The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.

  I'll change the design to one of the following:

  1) change the display only items of standard text field.  NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").

  OR

  2) do not include org structure in the download folder and just refer to table org Rep when necessary.

  Thank you!

  Steve

• How do dynamic actions using work to set the value in all browsers?

  I'm having a problem of incompatibility between browsers with dynamic actions to help to set the value.  Dynamic action works like a charm on Chrome but has no effect on IE or Firefox.  The code in oracle.apex.com and here are the credentials:

  Workspace: DDBA

  Username: [email protected]

  Password: redtruck12

  These codes is on page 3 and here are the details:

  There are two lists of report (Standard and special) and some reports require additional information provided in the lists of selection or text boxes.

  If the user selects a report select Standard requiring a list/text box, then the dynamic action sets the value of the special reports to NULL (and vice versa).

  Dynamic action is to prevent a simultaneous Standard reports and special selection.  To see how it works on Chrome, follow these steps:

  
  

  1. Run the Page 3
  2. Select the "Search report" option in the list Report Standard .  A text 'Search criteria' box
  3. Select the option 'Release report' in the list of special reports .  A selection list appears and disappears from the text box 'search criteria '.

  If you do the same on IE or Firefox, the text box does not disappear.

  Hi Edward,.

  Please check page 4 of your app, I made a copy of your page and made a few changes:

  I have set up an example of dynamic action 1 this hanles the report and special report selection list.

  Dynamic action games, select the value of the selection list and he accompanies in detail the report lists to null and then submits the page.

  For this I have deleted the page submit events to the time the report and special report select lists. Instead I handed them a HTML class. The dynamic action is triggered by a change of this category of html.

  When the trigger is the report selection list, select special report is set to null. Also underlying selection sub lists are set to null.

  When the trigger is the special report selection list, the selection of the report is set to null. Also underlying selection sub lists are set to null.

  The two end of the action with a "Send" page to manage the show and hide appropriate items. Note that there is a lag in time due to the submission of the page. As I have suggested, it would be treated better by a refresh of the region. On the other hand you depend on now submit for the continuation of the treatment of your page. With the help of an update of the region would require a work more javascript and cost more redisgn of your page. If you need IE8 support, additional javsascript likely to cause other unexpected behaviors. In other words, a page is maybe in your case probably better then an update of the region after all.

  I checked this page 4, Chrome, Firefox and IE (latest version) and I get the same behavior in all browsers.

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• Set the value to the field on another Page

  Hello

  I'm still a little new to this, through forums, that I managed to learn a lot of things. But I met another difficulty. I have

  I created a form in LiveCycle with two pages. On page 1, the fees are calculated by multiplying Field1 * Field2 and by adding the value of another. I managed to accomplish this with the following code:

  This.rawValue = Field3.rawValue + (Field1.rawValue * Field2.rawValue)

  As I said, that seems to work.

  To Page 2, I have a drop down list with five options. In the object > value tab I checked specify point values but has not changed a thing. If the value of the option range from 1 to 5.

  When option 5 is selected I want to set a value for a field that is Page 1. I tried with the following script:

  If (this.rawValue = 5) {}

  Page1.positionedSubform.field3.rawValue = 149;

  } else {}

  Page1.positionedSubform. Field3.rawValue = 0;

  }

  I'm now writer at all, but it seems to work somehow. Not that I want to :-).

  When I saw the PDF that it auto sets the value of Field3 and the drop to 149 field.

  I want to first Field3 on page 1 to 0 by default (entered in the object > field value tab 3) and set it to 149 if you have selected the option with the value of 5 in the drop down list on page 2.

  Any ideas?

  (Sorry for the bad explanation, don't know how to explain it better is if)

  Hello

  Did you use the calculate event in the drop-down list? If so, move the script to the output of the dropdown event.

  Niall

• How to set the value of a variable in automator?

  I'm totally new to automator I found a post that I try to reuse

  to Re: copy multiple files from TextEdit in one Word file

  I want to open a series of html files in a folder and convert in a TextEdit rtf file.

  However, I am unable to automator find out how set the value of a variable such that it appears in this post

  I looked at every command in library without a lot of fortune

  Any help?

  Thank you

  Dan

  Its in Utilities.

  In Automator, use the search box:

  

• Set the value of the parameter in the call sequence by programming

  Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?

  

  In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step.  Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").

  Jeff

• Set the value of cluster control in secondary school

  Hello

  Is there a way to set the value of control from one cluster to a high school?

  I enclose my screw in LV8.0

  Charly

  If you have a reference to the VI being put into secondary (which there or it is not in the secondary, right?) you can use it to get a reference to the façade of the VI. This in turn will allow you to read an array of references to all the controls and indicators on the front of the Secondary VI. Cross this table by looking at the text property of the label: for each reference in the table until you find the one for the control of the cluster.

  Now, use the specific function to more class to convert reference generic control of the pole to a cluster reference. You can use it to get an array of all the controls within the cluster. Now, go through this table by looking at the text property of the label: for each reference in the table until you find the one for control quevous want to set and you are there...

  Mike...

• Setting the value of a table of ActiveX control

  When controling a VI through ActiveX, how is possible to set the value of a table control?

  With digital controls, I have a problem: I just use SetControlValue and it works well:

  til SetControlValue ('y', 4) for example.

  However, in trying to do the same thing with a table, the control's value becomes an empty array:

  til SetControlValue ("arr', [3-4-5]") for example.

  What is the right way to do it?

  Hi Calvin,

  Have you tried passing a string and convert it to an array entry?  You can also try to use a 'matrix' control, rather than a table, as they are handled a little differently.

• Is any way to allow the user, set the value of a null datetime-local field

  Dear all,

  During development, I found that it is not possible for the user to set the value of a field to enter a non-empty value to null datetime-local.

  Take for example, the monitoring scenario

  -User set a track the date and time for a task

  -L' user wants to erase track the date and time of the task.

  But the controller of out-of-the-box made by webworks offers no way for the user to clear the values in the input of datetime-local.

  I would like to know, is there additional information about this limitation, or actually, there is a way to do this?

  Any useful information would be appreciated on this topic.

  Kind regards.

  Lawrence.

  It is advisable to add a "Clear" next to your input control button?

  The input control only allows you to select values for the value.  'Nothing' is not a valid date.

• Set the value of the page elements using apex.submit

  Hey,.

  Does anyone have an idea how to set the value of several page elements using apex.submit?

  Here is my request, she works for this element of the page, but I want to first the value of the other elements of the page (i.e. P30_SHOW_REF) as well.

  select s.nr as NRR, 
  '<input type="button" value="clickme2" onclick="document.getElementById(''BUTTONS'').style.display = ''block'';apex.submit({request:''SET'',set:{''P30_KLT_NR'':'||s.nr||'});"/>' Button 
  from klant s
  

  Thanks in advance!

  Hi Julijan,

  Here is the example:

  apex.submit({
    request:"DELETE",
    set:{"P1_DEPTNO":10, "P1_EMPNO":5433});
  

  Concerning

  J