set up a wireless connection for Windows 7 and telephone access

Similar Questions

• Question about the USB wireless adapter for Windows XP

  I'm trying to set up a wireless connection for my desktop pc with Windows XP. I don't see any options for a wireless connection. A USB adapter would do the trick? Looks like the easiest option.

  For a desktop computer with Windows XP, there was probably no built-in wireless card. Some systems Windows XP later had these as optional.

  You must meet your Dell model.

  A USB dongle should work, but make sure there is a Windows XP driver on the suppliers Web site before you buy. Windows XP has reached its end of life and is no longer supported by Dell or, more importantly, Microsoft. Be careful with the continued use of Windows XP, especially if the connection to the internet.

  You can install the unofficial service pack 4 before you connect to the internet which will help a little:

  

• How to Set up Wi - Fi connection for photosmart c4583

  How to set up a wireless connection for HP Photosmart C4583?

  Will be done, thank you very much Sir,

  banhien wrote:

  Hello

  This can help:

  http://h10032.www1.HP.com/CTG/manual/c01516370.PDF

  You can find more information at the following link:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3577781

  Kind regards.

  Duhaem, Riyadh

• Intermittent problems of wireless connection in Windows 7 Ultimate

  I recently bought Dell Studio XPS 1645 Windows 7 Ultimate edition. I am facing a frustrating problem with Wi - Fi. The connection is down and reconnect. I have the adapter Intel Wireless 5300 AGN and a router Dlink Wireless G I tried to update the latest drivers from Intel (Driver Version: 13.0.0.107), disabling IPv6 for all network interfaces, configuration of the wireless adapter to only use IPv4 and so on. I have 2 other systems with XP Professional on my home network. As soon as I start my Windows 7 laptop, the chaos begins. The router restarts every few seconds, other disconnected systems and so on. I have not found so far any solution on the internet that could solve this problem.

  Other observations that may help to understand my problem:

  1. once my wireless adapter disconnects, the ping my router fails. It tells me whenever my system is asking for a new IP address.

  2 Event Viewer displays multiple entries, which indicates that the DHCP could not get an address. The error looks like as follows:

  The lease of the IP address 192.168.0.100 to the network with the network 0x00216A934EE2 address card has been refused by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message).
  

  It gets an IP address later, but I do not understand why my adapter tries several times to get a new address every few seconds.
  DHCPNACK is the negative acknowledgement which router returns Win 7 DHCP client. I believe is that the client requests an address that is not available. Why would be client DHCP running on Windows 7 this?

  3. I have a D-Link WBR-1310 wireless router G with the latest firmware. Web sites of the reports that it is compatible with 32 and 64-bit Windows 7.

  4. I see no problems with the wired connection.

  As I type this, which could take a few minutes, my wireless connection rolled 7-10 times. All ideas, experts?

  If you need more information, let me know.

  I was able to find the main cause of intermittent disconnections on wireless interface. According to the information I have collected on internet forums and my research, I did as a result of configuration changes that have stabilized the connection. These settings work when you have N wireless adapter and a B/G Router:

  The wireless adapter settings:
  
  The driver for the most recent driver update.
  Access the properties of your adapter wireless network and sharing Center.
  Click on "Configure" and select the "Advanced" tab Make sure the following is in place:

  1 channel 802.11n for bands of 2.4 and 5.2 width are set to 'Auto '.
  2 disable 802.11n Mode
  3. Ad Hoc channel 802. 11b / g should be 1 or even that you have configured on your router.
  4. Ad hoc QoS Mode, keep WMM disabled - disable the router too. My wireless connection is stable once I made this change.
  5 fat Channel intolerant - disabled
  6. mixed mode protection - RTS/CTS enabled
  7 roaming aggressiveness - the lowest
  8 flow Enhancement - active
  9 transmitting the power - low
  10 mode wireless - 802.11 g

  Uncheck the box "Allow the computer to turn off this device to save power" on the tab "power management."

  Other Configurations:

  1. disable IPv6 completely. Uncheck 'Internet Protocol IPv6' in the wireless connection properties window. Repeat this for every other network connection you have.
  2. make sure you have the latest firmware installed on your wireless router.
  3 CTS Mode should be disabled in the configuration of your router 'Advanced Wireless' auto and WMM function.
  4. use only the WEP or WPA Wireless Security. Other methods have problems with 802.11n adapters.
  5. do not disable broadcasting of the SSID of your router. You don't need when your network is secure.

  I hope this helps.

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

  Community salvation and Lenovo,

  He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

  THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

  Hi Ran,

  Thank you!

  I have not yet tried.

  In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

  Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

  again and again, I decided to return to the old driver wireless Intel on this page.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

  Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

  I tested it again... THIS MARKET!

  Please try this combination:

  BIOS version: 1.15

  Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

  ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

  Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

  ThinkVantage Productivity Center Pack Version: 3.02

  Power Manager for Windows Vista Version: 2.41 has

  ThinkVantage Access Connections for Windows Vista Version 5.12.

  Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

  Kind regards

  Ritchy

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• Pavilion a6530f: what video card installed works for Windows 10 and a 300W power supply?

  I have a6530f a desktop Pavilion PC.  I am currently running Windows 7 and am interested in upgrading to Windows 10.  I get and error message when you try to install the W10.  "NVIDIA GeForce 6150SE nForce 430".  I think I need to improve my video card.  Can what video card I install that will work for Windows 10 and is rated for the power supply 300W in my lap?  I'm not very techie.

  Many of these inexpensive graphics cards for Newegg.com should work with Windows 10. Just watch for those who require a 300 watt power supply system or less.

  Drivers for these cards may be on the page drivers GeForcefunds. Simply select the card in the drop-down list or use the "Auto-Detect".

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP envy 14-2090eo: can I use the same drivers for windows 8 and 8.1

  When I check in drivers which operating systems there are drivers available for my Hp Envy 14-2090eo, it says Windows 8 (64-bit) and Windows 7 (64-bit), "and im currently using Windows 7 64 bit" but does that mean the drivers to support these 2 Windows 8 and 8.1 of Windows operating systems, said in a different way "» : are the same drivers for Windows 8 and Windows 8.1?

  Best regards from hpenvy1

  Hello:

  Your model has the AMD/Intel switchable graphics.

  It is unlikely that the W8 AMD graphics driver will work on W8.1.

  Normally, you can use some of the drivers W7/W8 on W8.1, but the graphics is very doubtful - not switchable graphics anyway.

  You can run the windows 8.1 upgrade wizard and see what it reports.

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

• can I disable having to connect to windows 7 and hotmail

  How do I change my settings to auto, connect to windows 7 and my hotmail account

  Hello janisum.  I understand that you want to have an account automatically connect at startup of Windows 7.

  This article has received instructions to connect automatically to an account on Windows 7.

  This article can show you how to save your Internet Explorer passwords.

  Let me know if it helps.  I wish you a nice day!

• Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

  I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

  Hello
  
  1. don't you encounter any error message during the installation of this update?
  2 is this problem limited to this particular update?
   
  I ask to download the update manually and then install it.
  Here is the download link:
  A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
  http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.