Pavilion a6530f: what video card installed works for Windows 10 and a 300W power supply?

Similar Questions

• How can I determine the HP Pavilion Elite m9400f video card installed?

  Hi all

  I work on a Pavilion Elite m9400f for a friend and would like to know how to determine the video card installed in order to get the correct drivers and configure properly. He "cannot" be the card that came with the machine...

  Thanks in advance!

  Regards - FreddoB

  Fred, here are the pages of the 'product details' for the computer.  In the Product Specifications section, that's what he said:

  Video Graphics

• Pavilion p6 - 2127c: video card Compatible hdmi for Pavilion p6 - 2127c

  I have a Pavilion p6 - 2127c in my conference room, desktop computer connected to a TV 50 "flat on the wall. I would like to connect using an HDMI cable, but there is no HDMI port. What type of video card should I buy that is compatible with the office and for the videos and presentations (no game)? Thank you in advance for your help!

  Cmann225, welcome to the forum.

  Here is a video card that should work with your computer.  However, you should check ASUS website to find out what power supply unit (PSU) is necessary.  It indicates that 75W is required, but it is the power supplied by the PCI Express x 16 slot.  This means that there is no need an additional power connector.  The power supply of the computer is 300W.  Also, check to make sure that the card does not require UEFI in the motherboard instead of a standard BIOS with ASUS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• My Cac card reader worked for a week and now the computer is not recoginize... told me that it is not connected?

  I installed the drivers and the correct software.  My computer has accepted the CAC card and it worked fine for about a week.  I tried to use today and the computer does not even recognize the card CAC reader was plugged.  I käpt asking me to ensure a card reader has been sonnected.  I tried to run a repair on the software, but that doesn't seem to help.  I rebooted the computer several times and even tried other card readers.  I could use some help.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you check the card reader with another computer?

  4. you use external USB card reader or the card reader integrated?

  I suggest you to follow the steps and check

  Step 01:

  I suggest you follow the steps from the link below.

  a. click Start, click Control Panel.

  b. click on system and security.

  c. click System, click Device Manager in the left pane.

  d. click the adapter card reader device, right-click on the adapter.

  e. tab driver , click Uninstal.

  f. click ok when you are prompted.

  g. now, go back to Device Manager and click Scan for hardware drivers.

  It automatically detects the drivers.

  Note: If the drivers are not found, then I suggest you to download the new drivers from the manufacturer's website.

  Step 2:

  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in Device Manager, look for the device and then double-click the device name.

  c. click on the driver tab, then click on set to update driver and follow the instructions.

  See also: hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Should what graphics card I get for graphics 2d and photoshop, illustrator?

  I am confused between a gtx or quadro card and what is the best. I'm a heavy user of Photoshop, illustrator, in-design, lightroom and much photo viewing and editing.  I don't do any kind of work 3-d, video or games.   Currently, I'm looking at the GTX 960, 970 and the Quadro k620, k1200, are these exaggerated? Other recommendations of the card are welcome.  The rest of my computer components are below:

  Corsair Obsidian Series 450 d mid tower case

  Motherboard Asus - Z170 WS, Z170 Chipset Intel LGA 1151

  -Core i7 6700 K Quad-Core 4.0 - 4.2 GHz

  -gpu?

  -Kingston 64 GB Kit (4 x 16GB) HyperX 2133 MHz, PC4-17000, CL14 DDR4 Fury

  -Grand Toughpower series GPT-750AH3FCG 750W, 80 PLUS GolD power supply

  Samsung - 512 GB 950 2280 PRO, 2500 / 1500 MB/s, V-NAND, PCIe 3.0 x 4 NVMe, M.2 SSD

  -Samsung 2 x 128 GB Pro 7mm, 550 850 / 470 MB/s, V-NAND 3D, SATA 6 Gbps, SSD

  See the recommendations of Roberto Blake: best video graphics card for Photoshop | Roberto Blake articles

• Z640: Upgraded the video card to 1070 GTX. I have to upgrade power supply?

  My Z640 has a supply of poer 925w but the power plug 6 pins only I think remaining is not enough to feed my 1070 GTX video card in use heavt. It requires care supply 2 x 8 pins and adapter I installed is not always able to provide enough power. HP chat support wasn't any help. Do I need to install a new power supply that provides power sheets 8 pin pci-e?

  @MacTheSteve, welcome to the forum.

  This is Service and Maintenance Guide for the workstation.

  I contacted StarTech to see if they would have an adapter 'Y' which had two 8-pin power connectors.  However, those that they should be the following on your motherboard or the power supply:

  StarTech Brandon: basically, there are 4 SATA power or LP4 molex.

  I believe that your diet is enough power, but simply do not have the required connectors.  At least, I don't the seen on the diagram of the motherboard.  It seems that you need to upgrade the PSU.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Cannot install updates for windows - 8007371b and 643

  Original title: failedupdates

  I continue to turn updates, but it is not with the following codes 8007371 b and 643 do - what I have to do?

  Hello

  (1) updates you trying to install?

  (2) is the specific question of specific updates?

  (3) have you made recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1 run system update tool 0x8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  Method 2: you receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates http://support.Microsoft.com/kb/958052
  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Method 3: How to fix the Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Pavilion PC 40f d61: WiFi adapters network for Windows Vista and Windows 7 64-bit download

  I just bought a new Pavilion with 10 Windows, but I would like to use my old Pavilion d61 40f PC (currently with Windows Vista, but soon be upgraded to Windows 7) in another part of my house, using a Wi - Fi connection.  I get the message "the ability of your network adapter does not match the requirements of this network."  From what I understand, I need to download PROWin64.exe to have a network adapter that is compatible with Vista.  My problem is that I can't download it if I don't already have an internet connection.  It can be downloaded to a flash drive and if so, how?

  I have the cable for internet and television and I tried to unplug the modem from my TV and don't connect using a cable ethernet at the back of the computer and a telephone jack, but still had no connection.

  If it is not obvious, I am a tech novice, an explanation with as much detail as possible would be greatly appreciated.

  New card arrived? Hope to hear your problem has been resolved by the latter.

• HP Pavilion Slimline s3720f: what video card should I buy?

  I want to add a new video card (not too expensive) for my old HP Pavilion Slimline s3720, but I do not know what video card to buy, because there are far too many choices. I know that the new card must be low profile with a half support so it can fit into the currently available in the motherboard slot. I hope that Conect my Dell UltraSharp 1708FP 17-inch LCD flat monitor VGA on this new card to get the best resolution and graphics. Can someone give me a recommendation indicating which card to buy? Please be specific. Thank you.

  The slimelines should never require a lot of video.  Your 2008 model circa was Vista.  Updates drivers ended with WIN 7. It's a miracle you got WIN10 without drivers available is another story.  Another factor is the skinny 160W PSU. That limits your options if you have a.  The common consensus is that either.  added heat from a graphics card, the likely additonal to a new power supply really outweighed costs.

• HP Pavilion 15-ak085na 15.6 ": what video card is in this laptop?

  I saw this laptop but without going to the store, I see not what video card it, seems that he remained off the coast the details of the product. I searched HP and did a general search on the internet and no results return - well on HP they do, but it seems to refer to a very old item. The question I am interested in shows that it contains an i7 gen 6

  Hello

  The links below shows its specifications:

  http://WWW8.HP.com/IE/en/products/laptops/product-detail.html?OID=9192758#! tab = specifications

  There: Intel® HD Graphics 530 which goes hand in hand with the processor.

  Kind regards.

• What video card do I need on a Dell Inspiron 1545 playing Fallout 3?

  I have a problem when I try to play Fallout 3 on my Dell Inspiron 1545 laptop. I tested my computer with the System Requirements Lab and he told me that I need an upgrade. I have a Mobile Intel (r) 4 Series Express Chipset Family.  He said that the Minimum that I need for my computer is Direct X 9.0 c compatible video card with 256 MB RAM (NVIDIA 6800 or better/ATI X 850 or better).  I looked this up, but I can only find ones for desktop computers. Do you know what I should get the video card and what one is for my computer?

  Shawn

  Generally, you may not get a new video card for your laptop, but if you can contact so that they can install it for you, unless you know how to install mobile video cards yourself.

  I looked towards the top of your machine and it looks like you have the possibility to have a 256 MB ATI Mobility Radeon HD4330 for your machine. That would probably be it. I don't know what type of processor you have, but this card should work for you. Integrated Intel cards are not good for games at all.

  Good luck.

• Desktop HP Pavilion p6-2104ed: video card - GTX 750 problems

  Hello

  Recently the video card that came with my desktop pc grilled (7570 Radeon), and I bought a new GTX750.

  This because the suppliers suggested HP to the Netherlands wanted to charge me 360 euros for a video card replacement 3 years, which seems a bit silly because I can get a better one for only 100 euros.

  Unfortunately, the new video card does not work with the current BIOS. My system BIOS is from 2012 (even if the time stamp in the page of drivers before the update said his starting in 2014). It seems that, like many other HP computers this bios does not support the full uefi videocard, I bought.

  I see several options, but would like input on what way to go.

  Is there an update of compatible bios for my system other than the one on the page of the driver (who says its from 2014, but in reality is 2012)

  Otherwise, what video card would you propose that would work on my system?

  My bios version:

  BIOS version / Date FRIEND 7.16, 23/03/2012

  My now broken (except the radeon card) complete system features

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03280789

  Semi-resolu!

  Although eachother dislikes the biosses from the video card and the desktop computer, you can still get around it by pressing alt + F10 when booting and wait about 30 seconds for 3 beeps. After that, it continues to the windows login screen.

  Thanks to

  https://www.YouTube.com/watch?v=fkBTSlBW2oc

  and

  http://www.TomsHardware.co.UK/answers/ID-1792146/gtx760-stuck-splash-screen.html

  Startup takes a little longer now, but the video card works great and has significantly improved the performance of the hour game

  Assuming that HP doesn't bother to update the bios (since they do not have 2012, about a year after the release of the desktop computer), this seems the best solution other than choosing a lesser videocard not uefi

• How to find what video card I have if dxdiag is not displayed there

  When I try to update my drivers it won't find a couple of pilots out of the Device Manager.  Then when I use dxdiag it dosent show what I have in my pc... what should I do?

  Hello

   
  You can view the name of the video card as follows:
  a. click Start and type to display the name of the video card in the start search box.
  b. click on the same open and check.
  Check out the following link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this helps!

• Having a problem getting 2 video cards to work

  Windows is having a problem getting 2 video cards to work in a desktop HP dc5800 SFF computer.  The first video card is a nVIDIA GeForce MX 4000 Jaton and the second video card is a VisionTek X 1300.  The two cards are dual monitor.  We strive to give the user 3 screens, but this configuration should be able to output of 4 monitors, if none of the material is in conflict with each other.  The integrated graphical subsystem integrated into the motherboard is disabled whenever a new video card is installed, due to the design of the Intel video chipset.  Any ideas what to try?

  Hi Myextraidentity,

  You cannot combine NVIDIA and ATI graphics cards. This configuration is not possible

  You can consult with NVIDIA or ATI to learn more about what is needed to support 3 + monitors

  NVIDIA:

  http://www.nvidia.com/page/contact_information.html

  ATI:

  http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspx

  Kind regards

  Kiki

• What graphics card will work with my Dell U2711 to 2560 x 1440?

  I just bought a Dell U2711 monitor I want to use with Photoshop at its native resolution of 2560 x 1440. I also have a Dell E2311H to use dual monitor with it in a configuration.

  The monitors are connected to a card mother with an integrated video chipset ATi Radeon 4200 with DVI - D and regular 15-pin output video under AMD Gigabyte MA785GM.

  However, the 4200 chipset does not seem to support the resolution 2560 x 1440 Dell as all I get are blurry tinted color characters. The ClearType text gives me just blurry garbage.

  I use the Dual-link cable that comes with the Dell U2711.

  What cheap graphics cards will work for me with this arrangement of material?

  Refresh rate is not important. I'm not a gamer.

  This video card has two DVI and DP and 2560 x 1440 60 Hz will do.