set up help entry report

Similar Questions

• Help, says report wireless radio does not work contact HP suport *.

  Help, says report wireless radio does not work contact HP suport *.

  Wireless on collar

  work wireless FAIL

  Reset your C7280 by turning it off, press and hold # and 6 keys while and shortly after turned it on.

  Now, run a Test of the front panel wireless network.

• AR: Journal Entries report convert to Excel using XML

  Hi all
  
  The customer asks to add a column and change the output to Excel format (using the XML publish) the standard report "AR: Journal Entries Report" whish is generated...
  I know that the report calls another report called "Journal entries report - out" with a few parameters one of them is "P_LAYOUT_DESCRIPTION" which may be 1 of these values
  Print account details, print details by category, print summary by account, print the summary by category
  and each of them has a different layout
  
  Now, I want to know
  1 - the ability to add a column to this report (SPAWNED)
  2 - the ability to translate the output as EXCEL, PDF, RTF (using XML Publisher)
  I know that the steps of how convert a XML report using the definition of data and model, but the program laid 'Journal Entries report - Output' calls specific parameters and does not mention the name of the template that will be used or the type of the output model
  as if I'm going to create 4 models for each presentation how to let the main report called the output report, which gives the correct model to be displayed
  
  Best regards
  
  Amir

  Of course I used it and I created for her many models with different layouts,
  But the user needs this report especially :(

• Need help getting reports significant chargeback

  I'm trying to understand if there is a way to obtain Chargeback reports more meaningful than what comes out of the box with vFoglight 6.7.1.  If I use flat on many levels, I have to create too many different levels and modules (and spend too much time by assigning them).  If I use MRU I get closer to what I'm looking for, but I don't know how much storage value add I/O.  I need to take into account the costs of storage, but I need to be able to charge per GB, are not the OPS / s.  Someone has found a way to dynamically load things like the number of processors, RAM and storage (per GB)?  It doesn't seem practical to create add ons for many configurations you end up with when you have hundreds or thousands of virtual machines.

  In short, I would like to be able to set a cost by vCPU and GB RAM GB of storage and power who object my VMs.  If you use MRU I would like be able to replace the storage I/O with used storage space, or add at least as an option.  If there is a way to add dynamic Add-ons which would work too.

  Thank you

  Here's how opposition to the payment:

  GHz consumed * rate per GHz

  vRAM Allocated * availability % * rate per GB vRAM

  Storage in GB * rate per GB allocated

  The reasoning is as follows:

  CPU allocated dynamically, and the number of cores is generally not relevant for most.  (Yes, I know vCPU to the ratio of base, but in real life environments, not usually the bottleneck CPU)

  vRam is not allocated dynamically, so using allocated RAM encourages its customers to pay attention to what they want and helps focus them on the joint efforts of resizing.

  The storage is the same, you pay for what you are asking and if you want to pay less, reduce your allocation.

  ====================================================================================================

  It is actually a pretty simple thing to write a report for and requires no internal billing module integrated at all (we do not use it).

  create a simple WCF called calcFunction to take 4 values double function as contexts and return args [0] * args [1] * args [2] * args [4]

  Create another simple WCF function called calcStorageAllocated, using virtual machine type VMWVirtualMachine as context, with the following code:

  storageTotal = 0.0 d

  VM? storage? datastoreUsage?. every {use-> += storageTotal ((utilisation?.committed + utilisation?. non validée) / 1024/1024/1024)}

  return storageTotal

  create a query to list the virtual machines in a context on a table-oriented entry line.

  Add additional context for cpuRate, vRamRate and storageRate

  Add the following columns:

  context, CPU, hostCPUs, usedHz

  calcFunction

  parameters: context/CPU/hostCPUs/usedHz/period/average, 0.0000000001, cpuRate, 1

  context/memory/allocated/period/average

  context, uptimePercent, period, average

  calcFunction

  parameters: context/memory/allocated/period/average,context/uptimePercent/period/average,vRamRate,0.0009765625

  calcStorageAllocated

  parameters: context

  calcFunction

  parameters: calcStorageAllocated , storageRate, 1.1

  It's a start, anyway.  might need a little tweaking and a lot of room for improvement, but this will give you a basic chargeback report.

• Help with reports in BI

  Hello world
  
  I have a question answers BI.
  
  So in 11g, we can find all reports seen in the tabs recently seen in the ri8 homepage.
  
  We have a relationship with a quick report to date and we also have this same report on the dashboard. This dashboard also contains a line of dashboard to date.
  
  We have a requirement.
  
  When the user opens the report visit tab. He needs to get the date of the report particular date fast but when the user tries to open the report of dashboard, the dashboard date must move to the report and the date provided in the report should be set aside.
  
  Ex: Guest dashboard has a date with June 13, and the report has a date with 31. When the user tries to open recently read tab report to see the data with MAY 31, and when he tries to open the report even the dashboard then on 13 JUNE shall transmit to the State and the date of the report MAY 31 should be reversed.
  
  IS this possible with the variable repository creation and session for the date variables.
  
  
  Any help is very appreciated
  
  Thank you
  
  Sam

  Hi sunny

  You can do something like your condition using a variable presentation and its default value.

  In the prompt of your dashboard, have it set a variable presentation called, say, T_DATE

  In your report, put a filter on the date column and that he "is equal to / is in. Click on 'Add more Options' and choose 'Format Variable'. Place in variable expr: T_DATE and the default enter the date of your report in the correct format.

  Paul

• Very slow Macbook Pro (2012), please help with report EtreCheck

  Hi all

  My Macbook runs very slowly, I tried a number of things suggested online but none worked. I recently went to a repair shop and they suggested it could be to do with the dataflex (not sure if this was exactly, but I remember it sounding similar.) They described as a hard drive to another internal component connection, sorry for the inaccuracy.) I have me am replaced, but this did not help either.

  I downloaded the software EtreCheck and I was wondering if someone could help me to make light of the report on possible solutions? I have the feeling that it could be the hard drive needs to be replaced, but have no evidence of that. Verification has been run for the problem of "Beachballing" and got the sub report, please let me know if more info would be helpful. I hope it's telling in a way!

  Thank you for the pointers.

  EtreCheck version: 2.7.8 (238)

  Report generated 2016-01-26 22:56:56

  Download EtreCheck from http://etrecheck.com

  Duration 10:23

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Beachballing

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 420 - SN = 9G22603YVD3MB

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour

  Disc information: ⓘ

  Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 499,25 go-go (248,48 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  OPTIARC DVD RW AD - 5970H)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [failure] com.apple.maspushagent.plist [details]

  Launch system demons: ⓘ

  com.Apple.Security.syspolicy.plist [failure]

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.85920

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: Version: 19.0.0.226 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 19.0.0.226 - SDK 10.6 obsolete! Update

  Default browser: Version: 537 - SDK 10.9

  o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]

  googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]

  JavaAppletPlugin: Version: 25 check the version of Java 8 update

  3rd party preference panes: ⓘ

  Flash Player [Support]

  Java [Support]

  TeXDistPrefPane [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  6% update_dyld_shared_cache

  4% WindowServer

  3% kernel_task

  mdworker (3) 2%

  1% launchd (4)

  Top of page process of memory: ⓘ

  508 MB com.apple.WebKit.WebContent (4)

  502 MB kernel_task

  Safari of 283 MB

  Finder 197 MB

  152 MB softwareupdated

  Virtual memory information: ⓘ

  988 MB of free RAM

  3.03 GB used RAM (750 MB cache)

  Used Swap 0 B

  Diagnostic information: ⓘ

  26 January 2016, 21:59:30 self-test - spent

  Hello mrdivorce,

  It looks like of course as evidence of a hard drive failing for me. Hard drives 2.5 "in the MacBook Pro tend to fail after 2-3 years. Judging by the date on your MacBook, I think that your time is up. Maybe try to find a different repair store. Looking for Service Center authorized Apple (https://locate.apple.com/).

  I suggest upgrading to an SSD and increasing your RAM too. Then you have the hardware to run the last OS X 10.11.

• Need help have reported my stolen Ultrabook

  Original title: Ultrabook stolen

  I am a student who is studying to become a certified Microsoft.

  February 6, 2014, my computer was stolen during the lunch break. Is there a way of

  report to Microsoft, and he would report it. It has already been reported to

  the police. The school is not useful because it was most likely another student.

  PLEASE, I BEG YOU! Help me A.S.A.P. thank you responding.

  Hello

  Microsoft keeps no information to help you find the computer. Check with the

  manufacturer of the system for the serial number and report it to the police. Keep an eye on Craig
  List, ebay and other sales sites.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Classic activation error messages blackBerry - set up HELP

  Hi all

  I hope you guys can help as I ned it BIG TIME!

  I have to put up all of my work phones (30 + BB classic) and I struggle with the kick tutorial (even if I did it for 5 phones already) and if this does not prevent me then I get the activation error message advising me that I can not add a becuas of email account that is not completed the implementation of process or unit training tutorial (all tutorials are complete and have ticks next to them).

  Please help I need to get these all met as soon as possible. Its so stupid that Blackberry have this stupid process that does not allow a simple set up. Never came across something like this before where you cannot configure a phone without all this hassle account.

  Can anyone help?

  I googled this problem and could not find anything and then a colleague has tried and found this link which helped

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do;JSESSIONID=4995A7294DB493B8E06A24A8805C72D6?...

  still doesn't explain the stupid rules on tutorials with complete it.

  Can someone change Blackberry this pathetic rule?

• API to set the help text

  Hi all

  I'm on Apex 4.2.5. I want to give a superuser can change the help text in an application. Is there an api procedure which gives the floor so that a user (super) can change the help texts of the fields of the application? I can then write a page with a report of all elements with labels with help texts (query select page_id page_name, region, apex_application_page_items label where application_id = 110 and lower (item_label_template) like '% with assistance %') and call the api when the help text is changed.

  Otherwise, I'll put in a clean table help texts. But how to manage that when a user clicks on a link with the help text, who recorded the text appear?

  Kind regards

  Tom

  tomvdduin wrote:

  I'm on Apex 4.2.5. I want to give a superuser can change the help text in an application. Is there an api procedure which gives the floor so that a user (super) can change the help texts of the fields of the application?

  No, but there is a feature request for it.

  Otherwise, I'll put in a clean table help texts. But how to manage that when a user clicks on a link with the help text, who recorded the text appear?

  You will have to create your own AJAX dynamic action that replaces the built-in bindings click on the help links.

• helps the report snapshot in full size conversion

  Hi people,

  Just start with PowerCLI and restored a scipt to send me a list of snapshots (I realize there are a lot of scripts that preset). the script works as expected, but the variable SizeMB includes 19 and 20 decimals, which makes it a little difficult to read.

  line of script in question:

  $Report = get - vm | Get-snapshot | Select vm powerstate, name, sizemb | ConvertTo-Html-head $a | Out-string

  example of output:

  VM	PowerState	Name	SizeMB
  Test cluster	PoweredOff	Before installing the drivers	432.1879596710205078125
  MAX - DEV	Receptor

  06/03/2013

  5201.38588237762451171875

  full script below. can anyone suggest an easy way to round or truncate the size of snapshot to a whole number?

  Thank you

  Alex

  Add-pssnapin VMware.VimAutomation.Core
  SE connect-VIServer foo.bar.com
  $vCenterSettings = get-view-Id "OptionManager-VpxSettings.
  $MailSender = ($vCenterSettings.Setting |) Where-Object {$_.} Key - eq "mail.sender"}). Value
  $MailSmtpServer = ($vCenterSettings.Setting |) Where-Object {$_.} Key - eq "mail.smtp.server"}). Value
  $a = '< style >.
  $a = $a + "BODY {font family: Verdana, Arial, Helvetica, without serif;} '. do-size: 11; "{do-color: #000000}.
  $a = $a + "TABLE {border-width: 1px;}. border-style: solid; border-color: black; border-collapse: collapse ;} »
  $a = $a + "TH {border-width: 1px;}. padding: 0px; border-style: solid; border-color: black; "{background-color: #04B45F}.
  $a = $a + "TD {border-width: 1px;}. padding: 0px; border-style: solid; border-color: black; "{background-color: #BCF5A9}.
  $a = $a + ' < / style >.
  $Report = get - vm | Get-snapshot | Select vm powerstate, name, sizemb | ConvertTo-Html-head $a | Out-string
  ' Send-MailMessage-to $MailSender-to ' [email protected] "-subject" SoE vCenter report snapshot "-$Report - BodyAsHtml - smtpServer $MailSmtpServer of body "
  Output

  Try to change this line

  $Report = get - vm | Get-snapshot | Select vm powerstate, name, sizemb | ConvertTo-Html-head $a | Out-string

  in this

  $Report = get - vm | Get-snapshot | Select vm,powerstate,name,@{N="sizemb; E = {[math]: tour ($_.)} (SizeMb, 2)}} |

  ConvertTo-Html-head $a | Out-string

  With a calculated property, you can make calculations or changes on the property that you want to display

• Expiry of time setting when adding entry in the cache

  An application that runs as a client of GemFire wishes to control the expiration of receipts of access to employment.  At the time where they add an entry in the cache, they know when they want input special to expire based on business rules.

  We are not see how this can be done.  Normal expiry time-based methods will not help.  Looks like a form any custom expiration should be used.  The client application will need to store somewhere their time-out value you want in the cache entry, if custom expiration code could read?  And if that's the case, that would be terribly inefficient?  I can't seem to find details on works of expiry.

  Any ideas would be appreciated.  What we are looking for, is something similar to what we have with webmail MQ/JMS Messaging.  With these types of systems, you can specify the expiration period when you create the message.

  As in the example, if you assign expiration entry-time of inactivity, then your custom class to end is called whenever you create, update or navigate to the key (a timer associated entry update). If a entry-time-to-live value, the class of expiration is called whenever you create or update the key.

  Once the timer goes off, expiration, defined for that entry, action is invoked.

  Note: when the expiration cusotm definition, as in the example, you must always provide timeout and action attributes even if they don't get used - it is simply to satisfy the XML validation process.

  -Jens

• Need help with report

  I am trying to create a report that displays the name, Powerstate and ToolsVersion.  I tried the following, but I have a blank record for PowerState:

  Get - VM | Get-View | Select-Object Name, @{N = "PowerState"; E={$_. PowerState}}, @{N = "ToolsVersion"; {E = {$_.config.tools.toolsVersion}}
  Any help would be appreciated

  Try it like this

  Get - VM |
  Select-Object Name, @{N = "PowerState"; E={$_. PowerState}}, @{N = "ToolsVersion"; E={$_. Extensiondata.config.tools.toolsVersion}}

  Or even easier, like this

  Get - VM |
  Select-Object Name, PowerState, @{N = "ToolsVersion"; E={$_. Extensiondata.config.tools.toolsVersion}}

• Need help for reporting the total capacity of the DS in service?

  I got this LucD script some time ago and I would like to know if it is possible to modify this script to display the capacity total datastore provisioned in multiple VCenter in different sites in view data warehouse | Summary tab. GroupBox ability ?

  $report = @()
  foreach($cluster in Get-Cluster){
      Get-Datastore -VMHost (Get-VMHost -Location $cluster | Select -First 1) | `
      Sort-Object -Property Name | ForEach-Object {
          $row = "" | Select-Object -Property Cluster, Datastore,CapacityGB,FreeSpaceGB
          $row.Cluster = $cluster.Name
          $row.Datastore = $_.Name
          $row.CapacityGB = [Math]::Round($_.CapacityMB/1KB,0)
          $row.FreeSpaceGB = [Math]::Round($_.FreeSpaceMB/1KB,0)
          $Report += $row
      }
  }
  $report | ft -AutoSize
  

  Any help would be greatly appreciated.
  

  Thank you.

  Of course, try this

  $report = @()
  foreach($cluster in Get-Cluster){
      Get-Datastore -VMHost (Get-VMHost -Location $cluster | Select -First 1) |     Sort-Object -Property Name | ForEach-Object {
          $row = "" | Select-Object -Property Cluster, Datastore,CapacityGB,FreeSpaceGB,ProvisionedGB
          $row.Cluster = $cluster.Name
          $row.Datastore = $_.Name
          $row.CapacityGB = [Math]::Round($_.CapacityMB/1KB,0)
          $row.FreeSpaceGB = [Math]::Round($_.FreeSpaceMB/1KB,0)
          $row.ProvisionedGB = [Math]::Round(($_.ExtensionData.Summary.Capacity - $_.Extensiondata.Summary.FreeSpace + $_.Extensiondata.Summary.Uncommitted)/1GB,0)
          $Report += $row    }
  }
  $report | ft -AutoSize
  

• Help with report script

  Hello

  Can be already answered this request. But I couldn't find it.

  I want to create the report for all the esx servers base based on the cluster information.

  I need in this format

  Get-vmhost | Select manufacturer, model name, version, Version, MemoryTotalMB, Numcpu, | export csv c:\Test.csv - notypeinformation

  Instead of MemoryTotalMB, I need in MemoryTotalGB

  So now my requirement is

  --------------------------------------------------------------------------

  Name of the cluster

  |

  Basic information of server ESX as mentioned earlier.

  ---------------------------------------------------------------------------

  Hope, our expert Powercli helps to create this report.

  Thanks in advance.

  Something like that

  $report = foreach($clus in Get-Cluster){
      Get-vmhost -Location $clus | `    select @{N="Cluster";E={$clus.Name}},
          Name, Build, Version,@{N="MemoryGB";E={$_.MemoryTotalMB/1KB}},Numcpu,Manufacturer,Model
  }
  $report | export-csv c:\Test.csv -notypeinformation
  

• Need help with reporting (vm, portgroup vlanid)

  Hello

  I need help.

  I want to create a report that shows the following:

  Report Portgroup (Networkname), VLANID, VM (Parent), Connectionstate

  
  PortGroup, VM and Connectionstate are indicated by:

  $pg1 = get - VM - DistributedSwitch dvSwitch1 | Get-NIC
  $pg1 |  Select Networkname, Parent, connectionstate

  The VLANID is indicated by:

  
  $VMs = get - VM - DistributedSwitch dvSwitch1
  $pg2 = $vms | Get-VirtualPortGroup

  $vlanid = $pg2 | Select name, @{N = 'Vlanid'; E = {$VLANID. ExtensionData.config.DefaultPortConfig.VLAN.VlanId}}

  The question is how to combine these lines and be able to add the vlanid State?

  I tried something like:

  Add-Member - InputObject $pg1 - name ('Vlanid' + $_)-MemberType NoteProperty-value $vlanid.extensiondata.Config.DefaultPortConfig.Vlan.VlanId

  Thanks for help.

  concerning

  Andreas

  Try it like this

  foreach($vm in Get-VM -DistributedSwitch dvSw1){
      $nic = Get-NetworkAdapter -VM $vm    $vm | Select Name,
          @{N="NetworkName";E={$nic.NetworkName}},
          @{N="ConnectionState";E={$nic.ConnectionState.Connected}},
          @{N="VlanId";E={(Get-VirtualPortGroup -VM $vm -Distributed).Extensiondata.Config.DefaultPortConfig.Vlan.VlanId}}
  }