F4280 all-in-one print is not in Windows 7
Hello
I have the F4280 all-in - one HP printer. This printer works with Vista or XP machine, but not any portable computer with Windows 7.
I had downloaded and installed software & driver for HP several times. Nothing works. I ran the HP software doctor with no problems found. I sense it's firmware related, but I can't find where to put up-to-date FM.
OS: Windows 7 64-bit
Printer: F4280
Error: No error anywhere. Printer power light flashes, no printer.
Hi HZ48,
Have you tried a new USB cable?
How long is the USB cable you are using?
You have a USB hub inbetween the printer and the computer?
How Win 7 laptops have this problem?
Tags: HP Printers
Similar Questions
-
changed router photosmart b110 e-all-in-one printer does not work
changed router photosmart b110 e-all-in-one printer does not work
Hi aged60,
I'm sorry to hear that you have linking problems with your Photosmart B110 printer.
I've included a link to HP Wireless Printing Center Troubleshooting web page. In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated. If you follow the instructions you should be able to communicate with your printer.
HP wireless printing Center - Troubleshooting
http://www.HP.com/global/us/en/wireless/troubleshooting.html
-
HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help
HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works. I looked for help & tried repeatedly, & am willing to renounce HP.
Hello
Thank you for using the HP Forums.
You can try this alternative solution to Scan:
HP extended Scan
FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
Let us know if it works.
-
Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found.
Anyone where I can download this driver?
There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.
They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.
-
Scan does not not on my HP Deskjet F4280 all-in-One. The power button flashes when you press scan. Everything else works. I tried to unplug it from the wall socket and reconnect it. Not solve the problem. What else can I try? Or, is it a piece of junk now and needs replacement? My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.
Hi woodcarver60,
Follow the steps outlined in the documents below to scan from the software.
HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921
HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857
HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146
Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers
HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019
Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers
HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647
HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350
All-in-one printers
Win 8: c03511921 http://support.hp.com/us-en/document/c03511921
Win 7: c03476857 http://support.hp.com/us-en/document/c03476857
Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146
Win XP: c03517150 http://support.hp.com/us-en/document/c03517150
Multifunction LaserJet printers
Win 8: c03755019 http://support.hp.com/us-en/document/c03755019
Win 7: c03584750 http://support.hp.com/us-en/document/c03584750
Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647
Win XP: c03584350 http://support.hp.com/us-en/document/c03584350
-
Photosmart 4700 all in one print but not scan
My photosmart c4740 (all-in-one) printer will print but not scan
Hi Donpaladino,
1. What is the installed operating system on your computer?
2. what happens when you try to scan documents?
3. you receive an error message?
I suggest you to follow the steps and check if it helps.
Follow the steps in the link and check if that helps.
HP Multifunction printers - I can't scan in Windows using the HP software
If the problem persists, you can also check out the links and check if it helps.
Scan and send (e-mail, send to folder, digital transmission, etc.)
-
HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless
Hello
English is my second laungage. hope you understand...
I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.
I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.
I print the Configuration Page from HP network.
Live wireless
Status on
What else can be done using wireless printer.
Kind regards
MI-Ko
Hello
If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)
Please turn off direct wireless (it's often a button on the front panel) and try to connect again.
I have included a link below for you rprinter support page that contains the user guides that should help also.
http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882
-
HP C5280 All in one printer does not print all of the beginning of the page or end of page
HP C5280 All in one
Does not print all of the beginning of the page or end of page
Hi david skelton.
I would like that you start by checking that you have the latest drivers for your printer:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&
I hope this helps!
-
To re - install my web download drivers for my Deskjet F4280 all-in-One Printer
I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
HP Software IDF.I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).
I discovered a web page of troubleshooting on the hp.com Web site, under the following title:
""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"
on the following web page: "http://support.hp.com/us-en/document/c03030583".
My processor information:
"AMD Athlon II X 2 240 processor / 2.80 Ghz '.I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.
I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.
If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:
{Deleted private information}
Thank you, Christopher Canfield.
The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.
Have you tried to use the Wizard for Windows HP printer installation?
I recommend to try it. It can solve the problem you are experiencing.
If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.
Uninstall the HP printer software.
Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.
Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.
-
OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7
THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.
I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.
Hey 123 problems,.
You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:
http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
4380 all-in-one printer does not detect the print cartridge
My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.
I'm sorry you have a problem with your ink not detected.
The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.
For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.
-
HP 6110 All in One printer will not scan to PC applications.
I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite. When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC. However, printing from the PC to the printer works very well and the USB cables are correctly.
Any ideas?
Thank you
... WSF
... WSFWSF,
Can scan you from your pc to the 6110, using the hp scanning software?
-
Application of scan works
Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245
-
My HP Deskjet F380 All in One printer will not communicate with Vista system
My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working. I swear to you that I have nothing else so he can stop working. I have lost the disc that came with the printer. When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play). Any help would be greatly appreciated thanks!
Hello
I suggest try to download the latest drivers from the link below and check if this can help:
It will be useful.
-
HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit
After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.
The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.
The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.
There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.
Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.
I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.
I also tried installing HP Printer Wizard. The result is similar.
Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.
Thank you
Dear Rainbow 7000.
Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.
The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?
After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.
This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.
It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.
Thanks for your help, and I hope this will help other users.
Have a happy new year.
-------------------------------------------------------------------------
Screenshot of the name of the installer:
Maybe you are looking for
-
My switch phone on silent all night until 11:00 and I can't receive calls. I am looking in the section setting but not find any solution. Second problem when receiving SMS is a voice reading the message, I tried to cancel but nothing about it. In the
-
How to stop a manual printing always print on both sides
My new HP Photosmart ePrint printer still prints both sides when alone is necessary. I put it in place for manual printing to save paper. If I don't have only one line on the page it will make me print on both sides. My older printer has been able
-
I have Windows 7 on a laptop MSI and whenever I type I suddenly notice that my cursor has jumped and my typing appear elsewhere in the document. It is extremely annoying! I tried several things to turn it off and found that nothing works. Help, pl
-
Export to first Elements?
I see that you can export in Premiere Pro, but it is possible to add the ability to export to Premiere Elements, which seems to be more in line with the product Clip?
-
You can always buy cs5.5 or cs6 master collection
You can always buy cs5.5 or cs6 master collection