set up local show for nonprofit cable station.

Similar Questions

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.

• Set a working folder for the database root $

  Customers need to set a working folder for the $ (root) of each project?
  
  We have created a database of RSC corresponding to every aid project and now have the following Windows folder and the database structure:
  
  (database) Path: $/ HelpProjectOne
  Local path: D:\Projects\HelpProjectOne
  
  (database) Path: $/ HelpProjectTwo
  Local path: D:\Projects\HelpProjectTwo
  
  (database) Path: $/ HelpProjectThree
  Local path: D:\Projects\HelpProjectThree
  
  My question is, when I open a database in the RSC Explorer, click on the ' $' at the top of the tree so that this option is selected, and then click file> Set working folder..., is it a good idea that the path field (database) is set to $ and the Local path field is empty?
  
  Or, I need to define the scope of Local path to D:\Projects or some other setting?
  
  

  In your configuration, you need to set the local path, for example, D:\Projects\.

  The contents of the folder to the datbase $- i.e. the folder HelpProjectOne - will be copied in the designated directory.

  -Dirk Bock

• set up a local test for coldfusion server 9

  I could use help with this thread in coldfusion forum...

  local test for coldfusion server configuration 9 w dreamweaver on mac

  http://forums.Adobe.com/thread/773350

  Thank you

  I am marking THIS as presumed replied, as you seem to have solved the problem in the other thread.

• I can map a network drive by using the appropriate credentials, but access is denied (by default local account for navigation)

  I have a laptop running XP SP3.  If I connect locally to the laptop and you try to map a network from a server drive on my network, it invites me for a username and password that I offer and the player must then be mapped.  The problem is that when I click on the new player, I get an access denied message.  It tries to connect to the share with my local account that has no access privileges.  Previously it tempt me a username and password, but apparently, I changed some security settings and it doesn't do this more.

  The same thing happens if I use the command net use.  I can map the drive by providing an appropriate user name and password, but I can't browse it in windows Explorer.  I really want to understand the context that controls if you get a prompt when you access a resource on the network.  I think that it is related to the setting of security strategy for network access: sharing and security for local accounts.  I played a bit with it, but in vain.

  I realize that I could probably add an account with the same username / password for my local account on the server and give access to my file shared.  I don't want to do that.  I have several users who share the laptop and access the local account access (I realize this is not ideal, but it is inevitable at the present time).  I don't want to have access to this network share.

  Can someone help me get my login prompt?  I searched on google for the last 2 days trying all kinds of suggested solutions, but I couldn't find one that works.

  Too bad... I was hoping that was the problem.  But at least it now asks you a name of user and password :-)

  Apart from that, you could look to make sure that NetBios over TCP (NetBT) is enabled on the client.  Deactivation of this force a direct hosting of SMB which sometimes has problems.

  "Hosting of SMB over TCP/IP direct".
  <>http://support.Microsoft.com/kb/204279 >

  Your latest comments seem to point to a followed initial connection or bad connect more or maybe you is not authenticated as expected.  A few quick tests, I did showed that if you connect using TCP/IP address instead of the computer name and specify everything, including the scope of user name online net "use", it reduces the network traffic needed to establish a connection.  As a test on a client, from a command prompt, try a syntax such as:

  NET use * \\192.168.1.10\share /user:192.168.1.10\username password

  Where "192.168.1.10" is the IP address of the server, 'share' is the name of the action that you want to connect to and "username" is the local user on the server to which you authenticate you.  If you use domain identification information, substutite for "192.168.1.10" domain name in the "/ user:" part.  If you log to a local account server from a name of user and password graphic prompt, try to including the name of the computer and the user name in the user name as in Nom_ordinateur\Nom_utilisateur area.  If it does not, unless there is really something wrong with the access permissions, I'm out of ideas.

  Good luck
  JW

• Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.

  I had a few actual creation difficulty one Hotmail account for my daughter.  I'm using Windows (newer) 8.  I have created an account for it, but can't make it work.  Everytime I try to sign into his Hotmail I get the following error:

  "Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.  Click "Access the parental control settings" to complete the process and access your account. »

     Needless to say I went to family safety settings on our PC and the Security Web site for the family repeatedly to change the settings that might seem to apply, but it has only settings web for her, no setting of Hotmail to update me at all.  Am I missing something, or is this a problem?

  I've seen one or two similar posts...

  Thank you

  David

  Hi BigDcdn,

  For us, in order to better afin de mieux aider help you with this issue, please send us screenshots of what follows:

  • List of child accounts on https://familysafety.microsoft.com
  • Settings for the computer of the child concerned on the site of the family safety (the page where it shows queries, e-mail notifications, etc.).
  • The list of the user accounts on your computer

  I have sent you a private message for instructions. After you download it, please let know us in this thread.

  Thank you.

  Okay, so I thought about it and it's ugly and not intuitive.

  The REAL CAUSE of the ROOT of this error is that you CANNOT add a new kid in the Family Safety (FSS) Web site.

  But as a solution, you can add a new kid on the Section of the Windows Phone website My family.

  FIRST STEP remove account the offending child of family on the site of the FSS under the management of the list of the members of the family section. Once this has been completed, follow the workaround below.

  WORKAROUND

  1. Then from the sign of site Web of Windows Phone with your Microsoft Account (MSA) (parent).
  2. Hover over your name just below upper right of the search box and you will get a context box.
  3. In the context box, select My Family.
  4. In the Section My family, you will have two lists. PARENTS and CHILDREN, and especially an ADD A KID to the right of the list headers.
  5. Click on the link. Now, you will get a login screen of the MSA.
  6. Register your child or have them enter login and password. They will appear as a kid under the section of your Windows Phone my family. Even if they do not have a phone you can add.
  7. Ask them to connect in hotmail\outlook.com with their MSA will complete the configuration of security for the family.

  REAL SOLUTION

  There must be a link on the site of the FSS for KID A ADD (add a child would be more enjoyable unless of course you are a family of goats) identical to that of the Windows Phone my family section. Seems like a logical place to have this option?

  I hope this helps anyone else having this problem.

• Error Msg: Local Area Connection network cable unplugged

  I'm installing Wi - Fi at home and continue to operate in the above msg.  I have wireless but

  I can't connect to internet at the "another computer" - not the host computer.  New router and adapter, double checked connections
  and have all the lights good... can anyone help?

  Hello

  'Local Area Connection network cable Unplugged' is a message that applies only if you use an Ethernet cable to connect to the router.

  See the documentation for your wireless adapter to find out how to connect wireless. Or number of the brand and the model this adpater for additional help.

  Tricky

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

  Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day.  No matter what I do, I can't get the camera to get on my computer (or iPhone).

  Here's some of what I've done so far...

  -Camera configuration and find the IP address

  -Type the IP address of the camera in the browser and camera open (it uses Active X)

  -Change Port number of the camera (Guide suggested using 2000)

  -Now you can type the IP address and the port number in the browser and access camera

  -Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know.  "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

  -Access using the public IP address.  It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

  -IP service.  Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service.  After the signing, I was directed to create a host name.  I managed to do it.

  -L' direct access of the ACTIVE camera address No - IP.  I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address.  This does not at all.

  -J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies.  He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save.  Nothing ever came and finally the connection times out.

  I did all the change of option combinations in each stage as many times I could think.  All I could change in these steps, I tried all the options I could.  I can't make it work.

  I'm so frustrated.  I'm not a computer person.  I managed to do a lot of things by reading the instructions carefully.  I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company).  Nothing I've tried works.

  Any direction would be greatly appreciated.

  Thank you!

  Did you put the IP cameras as a destination / local IP?
  If this is not the case, do.

  Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

• How to set the text html for a label?

  Hi all

  I'm trying to set the text html for a label programmatically by using the following code

   tourDescriptionLabel->setText(""+tourDiscHtmlString+"");
  

  but unfortunately my display of the label

  Some text’s most known 
  

  I tried with this in webView has achieved the same result. I'm getting response json string. I've hardcoded, the response data such cases it shows how reqular.

  Thank you

  Dembélé George Jacob

  I got it

  Thank you for your support

  QString tourDiscHtmlString                        = tourSummary.value("tour_desc").toString();
      QTextDocument text;
      text.setHtml(tourDiscHtmlString);
      QString plain = text.toPlainText();
     tourDescriptionTextArea->setText(""+plain+"");
  

• is it possible to set a default enclosure for my laptop start?

  is it possible to set a default enclosure for my laptop start?  Sometimes it is very noisy in the morning, when I'm trying to shut up, because I was listening to music the previous night.  I want a program at startup, which mutes the sound of the speakers, or maybe one in the shutdown process that does not rely on my do not forget to do it!  Thank you.

  You can remove the sound that shows windows startup. In this way it does not sound while loading. Once on the desktop, you can change the volume from there.

  Control Panel > sound > tab 'sounds' uncheck play windows startup sound.

  That should do it.

• What happens if a password or authorization is required for a "interactive logon to the local security for domain policy or..?

  I use a pc at home on my wireless router which is password protected.  Under the local security policy, if enable password to access interactive domain requirement, what happens?  [Activate: interactive logon: requires authorization by domain controller...] I block someone tries to access my pc via a domain or I will block my access?  I use windows 8 and windows 7 HP, (different PC)

  Hi Laurie,

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you need information about the interactive logon to the local security for the domain policy. I will certainly give you with this information.

  Logon information must be provided to unlock a locked computer. For domain accounts, this security setting determines whether a domain controller must be contacted to unlock a computer. If this setting is disabled, a user can open the computer using cached credentials. If this setting is enabled, a domain controller must authenticate the domain account used to unlock the computer.

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Set a default value for an attribute in modules - OPM

  Hello
  
  I'm trying to set a default value for a numeric attribute 0. I tried a few things but did not work.
  I was trying to default custom function that defines the default value of "0".
  I'm new to OPA, and I know not java.
  This is the java program that I intend to deploy as jar.but unfortunately it does not work.
  
  import com.oracle.determinations.engine.CustomFunction;
  import com.oracle.determinations.engine.EntityInstance;
  import java.util.Random;
  
  SerializableAttribute public class DefaultFunction extends CustomFunction
  {
  public Object evaluate (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  return 0;
  }
  }
  public Object requireKnownParameters (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  Returns false;
  }
  }
  
  }
  Is there any reference material where it has all the functions or the sample programs.

  Have you seen the article using developer?
  http://docs.Oracle.com/HTML/E29403_01/content/tutorials%20and%20Samples/Eg_Create_CF_to_Default_a_Value.htm
  This shows you how to use a custom default attribute (number) function. Maybe it's not 100% what you're after, but it might help.
  See you soon
  Ben