Setting automatic slideshow of the screen width

Similar Questions

• How to disable the automatic locking of the screen of the computer with windows XP

  How to disable the automatic locking of the screen of the computer with windows XP? so many people responded on windows 7, but NOT a SINGLE spoke of XP.  I have this problem.  screen goes into sleep mode and I have to wake up even if NO PASSWORD is selected.  I changed the POWER SETTINGS. Nothing helps.  NEED HELP. Thank you

  Well since it is already assigned, and a mod has not moved this somehow already in the XP section:

  On your desktop, right-click right properties, under the screen saver are of course "on Resume, display logon screen" is NOT checked. You can also disable screen saver.

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• automatic display of the screen

  Y at - it a command that allows a film director automatically adjust the screen size of viewers?

  You can set the rect of the scene and its drawRect, the rect of the first entry in the desktopRectList, but not all types of sprite satisfactory scale:

  on prepareMovie
    dRect = _system.desktopRectList[1]
    aw = _player.activeWindow
    aw.rect = dRect
    aw.drawRect = dRect
  end
  

• How to detect the automatic rotation of the screen on the storm?

  Hello

  I'm trying to resize BitmapField change direction of the screen. But I don't know how to detect it.

  Can you help me?

  What class should I use to this problem?

  Thank you.

  Override sublayout on your screen in order to detect changes in orientation.

  public void sublayout(int width, int height)
  {
     // Your code here
     super.sublayout(width,height);
  }
  

• PC starts, I set password and then the screen turns off and goes no further

  Hi, I start my g6 pavilion 2240, I get as far as putting my password then the screen turns white and I get not further

  don't know what to do now, I'm a surfer of money, so please tell me answers I can understand. Thank you very much

  Hello

  Try to use the system restore Windows to return the machine to an earlier point in time when it worked correctly - a complete guide on how to make of this (including a video preview) can be found on the link under the subheading: restore your computer when Windows 8 cannot start normally (it's to halfway down the page).

  http://support.HP.com/us-en/document/c03327545

  Kind regards

  DP - K

• How to set a header on the screen what scrolling doesnot and rest set up?

  I created a custom field for the title. When I add it to the screen, that there are no fixed to the upper part.

  If I add this field to setTitle(), it gets fixed but there is a white spot on the horizontal line under the header on the top field?

  How can I solve this problem?

  tried u setbanner?

• How automatic adjustment of the screen resolution?

  Howdy,

  CS5 ACE 2.0

  Sorry if this is discussed elsewhere. I couldn't find an adequate response. Feel free to point me in his direction.

  I wish that my flash file on "auto size" itself to any resolution of the screen. Is it done through the .fla/AS or edit HTML? As a gift, SharePoint is pulling up the html file.

  Thanks for any help!

  It depends on what you want to achieve.  Why don't you try all scaleModes with a few things on stage and see what you like the most.

• slideshow of the entire width of the images and text with switch small points

  Hi!, I'm going crazy trying to do something I think should be really easy and simple:

  a full-width or full-screen composition or a slideshow of images and text with little switch points instead of thumbnails.

  I guess everyone nows what I'm talking about... because all of a sudden he's everywhere!

  
  Something like this QooQee model: http://www.qooqee.com/templates/sense/sense-qooqee-slideshow.html

  I tried the compositions, but they cannot be expanded full-width...

  then I tried to slide shows, but they do not have triggers... they have thumbnails...
  I tried to fill points picture slideshow thumbnails too (I know that is not the best way to do this, but...). He did not, the filling will not appear unless I low opacity... Why is this?

  I also noticed that the example of sense QooQee is something complicated... text is displayed as 'on-off', but images do their entry by a transition melted... are you looking for they combining 2 widgets for this?

  Any help is appreciated! : )

  Hello

  What you're trying to achieve is possible in the Muse by using the Fullscreen Slideshow option.

  I created a video showing how it can be done. Please download it using this link:- http://adobe.ly/1mp5X84

  Please let me know if this worked for you.

  Kind regards

  Rohit Nair

• Setting display to adjust the screen from black.

  Where settle this on Vista Home Premium? Impossible to find.

  Hello

  Control Panel - Power Options - Choose top left when turn off display

  Also check the power Plans - change plan settings - check those and advanced settings
  Reset to default values if necessary and then set as you wish.

  Control Panel - personalization - screensaver

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• How to set a field to the screen where I want

  Ma have a nice one for all

  Here I have a prob is that I keywordFilterField.getKeywordField () and keywordFilterField in my screen when I scroll "keywordFilterField.getKeywordField ()" also go to accrding to the list, but here I want to Scrool only to list items to please help me in this regard.

  I got the answer I added this field to title

• How do I get the screen width and size of the screen of the Blackberry storm?

  Hi guys,.

  I use the following code for the image capture.

  Bitmap bitmap = new Bitmap (Display.getWidth (), Display.getHeight ());

  try {}

  Display.screenshot (aBitmap);

  }

  In 4.3.0 (8120 device), when we use Display.getWidth () and Display.getHeight () it gives 240 x 320 respectively which has the correct size of the device.

  But in 4.7.0 Blackberry storm, when we use it gives data(240x320) even where the size of the device screen real is 360 x 480.

  So when we capture the image in the storm he's only half of the image. And also when hard code us the image like it from 360 x 480 size is thrown exception.

  Please suggest is there a way to capture full screen.

  Thank you

  Thanks for sharing the result. You can mark the thread as solved.

• Satellite L - after that set BIOS to update the screen is black

  Hello

  I made an update of the BIOS on my Windows 7 64 bit, then the OS get frozen. After I restarted the laptop, ago just black and nothing appears on the laptop.

  What can I do?

  > What can I do?
  Time for boyfriend to ASP.

  It seems your BIOS did not complete successfully and the ROM module where the BIOS is stored has been damaged or has been flashed properly.

• How to set the orientation of the screen

  Hello

  I don't have the time to support portrait and landscape for my application now... :-(

  I used the trick, like y = 601 to hide things. (I know the visible property, but for the same reason, do not use it)

  But I realized that if the playbook turns to the portrait and auto-size of the unit itself, my trick won't work no more... (and it will be very funny... Unfortunately, Simulator did not support orientation for testing)

  So, for the configuration of the xml file, there's a parameter as:

  fake

  in order to avoid the automatic orientation.

  But, I can't find a configuration setting to 'force' and the screen always Frizz in landscape mode (1024 x 600).

  What are the settings to force the application always on 1024 x 600?

  Thank you.

  You can do this in the root Sprite parameter, by

  [

  [ SWF (height ="1024", width ="600", frameRate ="30", backgroundColor ="#000000")]

   

  Most of the people are locking in landscape mode, until the Simulator supports or they get their PB.

• Screen width of Simulator crunched when running the app

  Hello

  When I start first the simulator of the screen seems functional and covers the entire width, but when I run an application the screen width reduces to about 600 pixels.

  

  When I then close the application area of the entire screen appears to have adopted this new width and the only solution is to restart the Simulator.

  

  I specify the width and height in my apps:

  [SWF(width="1024", height="600", backgroundColor="#cccccc", frameRate="30")]
  

  No idea why this is happening?

  I use Flash CS5 and invited him to develop Playbook apps. I have the SDK installed and works.

  Any help would be appreciated!

  Was a simple solution in the end.

  Changed 1 line in the XML file:

  portrait
  
  to
  
  landscape
  

  Don't know why I didn't see that earlier...