Internet Internet, locked virus. Help please

Similar Questions

• Problems with the closure, by opening the Task Manager and Norton Internet Security. Help, please!

  Hello

  I have a HP Pavilion dv7 with Windows Vista Home Premium (64-bit). Until Monday, there is no problem whatsoever with my computer at all. I have not installed or uninstalled, whatever it be, changed settings, done anything differently with my computer. Suddenly it now "hangs" on the screen of closing down. I'll try to reboot or stop using the menu start, and it will stay on this screen indefinitely. Now, I have to manually turn off the computer. I spent on the Support page and studied the Performance issues, and all I get is I have Visual settings that interfere with closing... except my Visual settings have not changed in any way. In addition, I can not properly update my computer or do a system restore because the computer will shut down.

  In addition, the Task Manager will appear no more. I'll press ctrl alt del and nothing appears, just the green icon in the corner of the screen. If I try to right click, no response.

  I tried to do a full system scan in Norton Internet Security but she "leaves" scanning. It will scan correctly when I'm in safe mode, but it comes with no virus, trojan or other problem.

  So in essence, I tried everything I can think of to fix my computer nothing works. It was working perfectly before this week. I have no idea where to go. Any thoughts?

  Thanks in advance,

  G

  Hello

   

   

  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.

   

  Method 2.

  Step A.

  Start your computer in safe mode and check if it starts.

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.

  
  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

   

  Method 3.
  I recommend to run the restore of the system in safe mode and check if it works very well.
  Reference:
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

   

   

  I hope this helps.

   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Router/ISP/Internet problems! Help, please!

  Well, I tried to change my IP rogers for about a week because I got banned of something... I've heard of this thing called cloning MAC and wanted to try it. I've seen instructions on a Web site. He said that because I have my internet set up as "Modem Router to computer" I should go on my routers home page and change the settings from there. So after going on the site, I saw where it said "Clone MAC'. I got a MAC address, and then I took the card from my router and the Modem for 10 seconds and then plugged it in. There was something wrong! I couldn't use Firefox, Internet explorer and many more things internet related! I could always run liveupdate for my Norton 360, and I could always use Limewire. In addition, the average download speed was about 70 KB per second, when it is usually about 360 KB per second. Then, I connected the Modem directly to my computer without using the router and everything worked. A I mess up something with my router? Do you have my ISP Rogers, cut me? Please please help! I am running Windows Vista Home Premium 64-Bit. I have 4 GB of RAM. I have Internet Lite from Rogers.
  Thank you.

  Unplug your modem to your PC. Plug it back as before, modem to the Internet port on the router and then any port your pc LAN. Accessing the web interface and the mac clone, but he enter manually. When you click clone Mac. my PC it will copy the MAC address of your PC. Now the modem will think that your PC is connected directly to it. Now, see if it works as it should.

• Can not activate my LR6, says "no internet connection". Help, please.

  Hey everybody,

  I just bought a new copy of LR 6 (series license, download, no CC). Download went well. As with the installation process. When I finally started the program it tells me to connect to Adobe ID to register/activate the program. If I start the process it says the certificate is invalid and asks me if I want to move forward. Then I hit Yes. The wheel turns and after a few seconds/minutes, it tells me that I am not connected to the internet, even though I am and everything works fine.

  I tried the following:

  -checked my system time settings in Windows and BIOS

  -disable/remove Firewall (Comodo)

  -checked my host file

  -tried to connect in Windows safe mode

  -created a no account w user with administration rights

  -added the GlobalSign Root CA certificate to my certification authorities trusted root

  -many-/ relocations

  In addition, the Adobe Manager application gives me code error 12175 (download error) and even does not start correctly. Cancellation of what it is a PC brand new with a new Win 7 Setup. Everything else, including the internet connection works fine.

  I would be grateful for any tips, because I'd like to use the new LR 6. Otherwise, I might have to seek a refund.

  Looking forward to your help.

  Thanks already,

  E

  Please see the links below.

  • Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite.
  • Internet connection with creative cloud problem
  • Adobe Application Manager does not connect!

  Hope this will help you.

  Kind regards

  Hervé Khare

• T400 problem with slow speed internet wireless. Help, please

  Hello

  Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

  Problem:
  upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

  I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

  OS: Windows 7
  Network cards:
  Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
  Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

  I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

  Wireless configuration:
  Wireless g connected to the modem access point high speed
  So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

  Thanks for reading this. I hope that some kind soul can help.

  pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

• why I don't get internet access? Help, please!

  Why when I connect to my wifi, I'm permitted little or no internet access, but it still shows me trhat I'm connected?

  Hi Chris Naylor,.

  1 Windows operating system you are using?

  2. have you been able to connect to before without any problem?

  3. did you of recent changes on the system?

  Method 1:

  You can read the following article and try to run the troubleshooter and check.

  In the Windows wireless network connection problems

  Method 2:

  You can try to update the wireless adapter and see if it helps.

  Updated a hardware driver that is not working properly

  Method 3:

  Disable IPv6

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection.

  Method 4:

  You can also temporarily disable third-party security software and firewalls installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  For more information, you can consult the following article:

  Solve problems, find wireless networks

  Hope this information is useful.

• My Web page works fine in Dreamweaver/Firefox and Safari but not will not work correctly in Internet Explorer. Help please

  Hello

  I downloaded my page from Dreamweaver yesterday and it works fine in Firefox and Safari, but when I open it on Internet explore, background tables have moved and the image links above have a white boarder around.

  Web page link: http://www.GS-designproject.co.UK/home.html

  any help much appreciated.

  Thank you

  GAV

  The white edges around your images are created as they are integrated into the links. Add the following to your stylesheet:

  an img {}

  border: none;

  }

  The problem with the line of the table at the bottom reads:

  colspan = "760px" height = "40" valign "middle"="" >

  The colspan attribute takes the number of columns that you are stretching on, not a number of pixels. Judging by the rest of the table, to colspan = "7".

• Internet connection problem help please

  When I try to connect to the Internet it will not and when I click to troubleshoot the convenience store does not open. Also through cmd, I used fig icon and everything saying media disconnected

  You have McAfee?  The problem is only recently emerged?  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary.  There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as other listings of McAfee said since then, the application did not refer to his database of threats correctly. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• not able to log in to Administrator without reset disk other accounts have parental control then install is locked! Help, please.

  I have reset my administrator password and has forgotten. IM connect threw my account friends boy but his only standard user. I ordered parental his account so that his friends could not download or install something due to the virus since then. so now im unable because of a lot of things. I was denied access when attempting to Admiral hidin' VAC. How can I solve this problem and save the files that I have on the blocking on access administrator position?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Recurring virus / Help please

  Hi all
  I recently found 2 virus during virus scans on my computer. They are: Trojan.JS.Gord.a and bjocacuticabaq (Trojan.Agent.U) this one was in my registry. Also they keep again, so I continually have to sweep and remove them. I was wondering if anyone had any information about these viruses, what are their goals, and if someone he uses to hack me. Any information would be much appreciated. Thank you for your time.

  (To scan my computer I used Malwarebytes Anti Malware and Antivirus Rogers.)

  Hello

  No program can detect and remove all malware and these easy-to-detect comes often
  a much more difficult to deal with the payload. So to do a very thorough job of hunting down them and then run
  Cleaning section below only when you are sure that the system is indeed clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 build 7600, windows 7 is not genuine. black screen and no internet connection. Help!

  Help, please. the lower right corner of the screen says windows 7 build 7600. Windows 7 not genuine. I have a black screen and I have no internet connection. Help, please

  Have you tried to restart by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• Help, please! Slow internet on Vista computer 17/40Mbps speed...

  I have a newer computer with 4 GB of ram and a dual core cpu. I am running Vista and you have two computers that are connected to a router. The other two computers get high-speed internet, but the Vista computer gets half of what gives me my ISP. I have a connection of optical fiber with download 40Mbps. speed I 39Mbps on two XP systems but the Vista I get 17-20Mbps.

  I scanned for viruses and the computer is clean, I updated the drivers ethernet, the firmware on the router and I changed the connection cables. Nothing has helped to increase the speed or performance. Any ideas? Help, please!

  Thanks for the replies!

  I already tried all the foregoing, but yesterday, I found two culprits. 1 I have updated to SP2 for Vista and my speedtest went up to 25/40Mbps, but the main culprit was Norton 360... Even though I disabled the program (Firewall/AV) I looked again in the application and noticed that garbage online backup, they've added was technically on but set to "manual". After you completely disable the full online backup feature, I did another test of speed through my ISP and got 39.7Mbps!
  I am happy again! Thanks again for the help.

• I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  It is a bug in 9.3 and persists in the 9.3.1

  to get back to be

  1. turn off the power, remove the sim card, reverse and insert sim card when asked. Or

  2 disable cellular data, mode airplane and then turn off. Wait about 30 seconds and then turn it on turn off the airplane mode and then turn on the cellular data. He must find it.

  but this is only a work around.  If you turn off again, you will have the same problem and her you need to repeat the steps above.

  Good luck

• I want to install the ios 9.3 update in my iPad. I get the message: "audit failed because you are no longer connected to the Internet" actually, my wifi works and I'm online. Help, please.

  I wanted to install an update to iOS 9.3 on my iPad mini legacy. After that I entered the password for my motto. I receive the message: "check failed because you are no longer connected to the Internet. I then checked my wifi and works and I can go online. why I can't update? Help, please. Thank you

  This is a known error for which Apple seeks a solution. See Troubleshooting iOS 9.3 update problems.