Setting lines bleed and crop marks

Similar Questions

• How to print crop marks, but keep the cut as A4 paper

  I was asked to create a brochure, although I normally do web development. So I installed InDesign a week, with no prior experience. I did created the brochure, created a PDF high resolution (using export) and sent to printing, assuming that it would be sufficient. It didn't: they must "impression of brands" (says my client), I'll assume that is crop marks.

  So I thought that everything I could on works bleeding and slightly modified my design to accommodate that (I got a few horizons towards the edges). But the question I have now is that I don't know how to create a PDF file with the right dimensions: A4 for the resulting page and crop around her landmarks.

  My Document configuration is set to A4 size (not counting the bleed). It is in the mm, so 210 x 297 mm. The purge is set to 3 mm on all sides. Slug is set to 0.

  So I'm going to file > print (in PDF), under Configuration to scale to 100% and marks and purge check "of crop marks. But the problem is that my design already covers the entire area of the A4, so the crop markers to add 'outside' of it. It does not, because "Paper size" corresponds to A4, as well as crop marks are not printed, they fall outside the print area (if my design is focused; it is top-left, I lose the right and down). Now, I can force it to print crop marks using "Scale to fit" - but then of course my page which is no longer not A4; evolving just everything down so that the crop are in the edges of a regular A4 format. But at least I see pretty brands he creates then.

  I know that I need to print on A4 oversize, but I can't figure out how to get that. I could fix it manually by adding a number of mm to the width and height, but I read everywhere that InDesign is supposed to do it automatically. So I think there is an option somewhere that I can't find.

  So my question is: where is the option to automatically increase my 'paper size' when printing to PDF, based on my configuration Document as well as the area for bleeds and crop marks?

  (this seems a simple question that I am surprised, that I can't seem to Google an answer to this...)

  Joris debonnet wrote:

  So I'm going to file > print (in PDF)

  This is your mistake. Use file > export... and choose Adobe PDF (Print) from the drop-down list type or file > Adobe PDF presets and choose the correct preset in the list based on that to your printer. Under the control of marks and bleeds box to use the settings of purge of paper and boxes for the brands you want - for sure, guides of crop possibly as well information page, and bars of color or brand registration request printer.

• Crop marks, when applied, do not measure upwards

  Illustrator CS6

  I have a dieline that measure 8.0 "x 10.0". When I apply the crop on the dieline benchmarks and measure the horizontal width of the brand culture from one side to the brand culture on the other side, it gives me a 8,0042 "width. Does anyone know why it does this? If I measure the vertical crop marks it gives me 10,0042 ". It is not a huge amount, but when you're dealing with dieline packaging and your dieline said 8.0 "and crop marks are 8,0042" apart it affects the location of the other brands such that bleed, seals, pleats, panels of glue, etc. Thanks for any help!

  When you removed the race you should have seen your crop marks (which is a direct effect), move, unless you already developed appearance.

  Click on the image below to see 100%. The two squares are 2 inches (because I use limits of Preview disabled in preferences), except the first square on a black line, and crop marks are at the outer edge of the race.

  

• iMovie image not showing image, only crop marks

  Hello!

  When I try and insert an image in the image of my film, crop marks (corners) are to rise on the top of the window of the film, but the image is not there. I tried to save the image in several formats (jpeg, tiff, png, pdf) does not. I can see the image above the project and can double click on it for salvation in the yellow light and bring up the Inspector, but cannot do appear in the film. It's as if it was sent to the rear and crop marks are just show me where about htis image behind the film.

  Any help would be appreciated a lot because it's for my son's school project :-)

  I'm on El Capitan 10.11.2

  

  There are many problems reported with stills in iMovie versions 9 and 8 in case of performance under El Capitan.  I haven't heard of this particular case where nature seems OK in the case but not a picture in the photo, but it can be linked.  (The selected thumbnail looks like a video rather than a still and video clips should work OK).

  He had problems even with stills in iMovie 10 under El Capitan, but they seem to be mostly resolved with the latest version of 10.1.1.

  Geoff.

• In the Pages, you can set crop marks printer?

  In the Pages, you can set crop marks printer?

  Printer crop marks are not implemented in any version of Pages using v5.6.1. Export to PDF and open it in the designer of the affinity. Once again export to PDF and apply the printing marks in the menu export. The following has been open in the designer of the affinity and exported in the form of a PDF/A-1 a with all the points you see here:

  

• How to export to PDF with crop marks * and * an image high resolution?

  HI - firstly, apologies - I have another query here and this is a related issue. Because I have been unable to solve this problem, which is with InDesign CS5, I downloaded the demo of InDesign CC, as I work at a date limit.

  OK, so I'm used to be able to export PDF files of high quality with crop marks in CS5. That's what I want to do with my file.

  In InDesign CC, it seems that if I simply 'export', I don't give me no option to add placemarks of crop, even if the file is configured to have a bleed.

  If I rather 'print' in Adobe PDF format, I * can * add crop marks. However, I then lose the option to export images in high resolution (300 dpi), and they come out pixelated.

  Maybe I'm missing something, but for now it seems to me that I have a choice of images of high quality but without crop marks or crop marks and bad quality images!

  Any help is appreciated!

  Thank you!

  PDF presets are the same in InDesign CC, they are in InDesign CS5.

  Choose file > export > Adobe PDF (Print)

  Simply choose a preset PDF which defines the resolution of the image in order to treat his high enough for your printing. There is also an option to print the Page guides and funds lost.

• Bleed and marks for a culture magazine. need help

  Can someone tell me how to place multiple benchmarks of cropping for a project page?

  For example on a left page I have set benchmarks of crop only on the left side of the page or all around him?

  * I use PS because I have no experience with ID.

  Thanking you in advance

  Preparation of the same page? Confirm the bleeds and trim on four sides. It gives the latitude of publication for the placement of left or right hand.

• Set a Date and hour - 5 week months does not show last line

  Hi all

  I work with Labview 9.0 (32-bit) on Windows 7 with a system of 125% font size. When I opened the set the time and Date dialog box, months with five lines of days cause the window to cut the last line in two. Is it possible to fix this? I tried messing around with picktime.vi in \resource\dialog\ [LabVIEW], but it won't change the dialog box (and I said that it is not supposed to?).

  I can't upgrade to a new version (my only recently developed business to upgrade to Labview 2009 and wants to keep for reasons of stability) and I can not change the system font size because 125% is the norm. Someone suggested to change the font sizes in the environment is smaller, but I am not either - I need to the font size.

  I intercepted the Browse on a control path before, this is very similar.  Trap the mouse down? events that lands in the time picker button and call your VI changed instead of control to handle.  The simple limits I think works for the Browse button in the location by default on the right side of the control (any where on the right side in fact).  If you move it to the left or lower or higher, you may need to adjust the calculation.  These blue properties are script in case you're wondering.

  

• How to clean lines with .pds files and unwanted marks analyzed.

  I created a large number of music based ratings with .pds files and unwanted marks. Adobe Acrobat 11 does not seem to allow me to do. Is there another suitable product that helps with that, like Adobe photoshop or another tool of "editing"?

  Open in Adobe, click on:

  View

  Tool sets

  Default tools

  Editing content

  Change the text and Images

  Select the page you want to edit

  Change to help (use the arrow to scroll down to change using Microsoft Paint)

  Once in paint select the Eraser and erase all black little brands or whatever it is you do.

  Save to the desktop in JPG format.

  Open again in Adobe if you want, you can optimize it (deskew etc.) by clicking on:

  View

  Tool sets

  Common tools

  Working with scanned Documents

  Optimize scanned PDF document

  You can add or remove pages in Adobe.

  I hope this helps.  Sounds complicated, but it isn't really.

• In v31.0, I can view is more 'raw' XML files with line breaks and ' < ' and ' / > ' characters. Is there a setting that will give me this option?

  Until a few days ago when I opened a file XML with Firefox, I see the content of the file appears with line breaks and ' < ' and ' / > ' and elements. Like this:

  fixed image in < typeOfResource > < / typeOfResource >

   <genre authority="marcgt">picture</genre>
   <genre authority="nmc">Print, Photographic</genre>
   <originInfo>
     <dateIssued encoding="marc">1884</dateIssued>
     <dateIssued encoding="marc">1884</dateIssued>
     <issuance>monographic</issuance>
   </originInfo>
   <language>
  

  Now, it will display like this:

   still image picture Print, Photographic 1884 1884 monographic eng electronic
  

  No tags or line breaks. I need to see the entire XML file. How can I configure FireFox to display this for me? One of my colleagues uses v31.0 and XML views with tags and the line breaks for him.

  For example, I was looking at files sitemap.xml (search Google for inurl:sitemap.xml). For those who have not declared a style sheet, you should always see the classic "source highlight: presentation

  Example: http://www.website.com/sitemap.xml

  Are the files that don't appear as similar planned by not declaring a style sheet?

  As a temporary workaround, you can view the source to see the original. Either:

  • CTRL + u
  • Right click > view Page Source

• simple question, hopefully: how to set crop marks?

  I want to just specify where is the purge. Thaaank you.

  If you send them the PSD then you can save those setting in the document without printing it.

  Set the purge and cropmarks then the fact instead of print. When you save the file, these settings will be saved with it.

• Crop marks does not print

  I only ran into this with a single customer. He sends me some individual epses, each of them a business card to print. When I open them in Illustrator, it looks like in there are crop marks and bleed, when I placed in InDesign, as I always do, to set up 8 on a purge page does not print and does not print crop marks.  I can expand the subject box and see the base notes lost and culture, but they always used to print. If I print directly from Illustrator just to test it, it prints the ooze but still no benchmarks of crop. It of all in CS3, but was the same thing when I got CS2.

  Erie,

  I want to say is: you are sure they are crop marks (as in filter > Create > crop marks, I think, I'm still with 10 where he is Trim marks) and not the acreage (object > acreage, formerly benchmarks of crop), old printing, the definition of the latter?

• Place a PDF with crop marks in InDesign

  Hello

  What is the standard procedure to place an external ad provided in a document that includes crop marks? I am placing ads in a brochure of the Conference and by removing crop marks that I seem to be removing the small pieces of the provided work?

  Thank you

  Ben

  Hi Ben,

  If the announcement will not bleed (probably the it won't) then you should be held shift when you click "open...". "and choosing" crop. " Select 'Trim' and you shouldn't get the crop marks.

  Kind regards

  Malcolm

• How can I add crop marks in Photoshop?

  Only use Photoshop for a few months and for an ad that I designed that they need "crop marks" added. How can I do this?

  Here's a simple video that explains how to do this.

  http://haizdesign.com/Photoshop/add-crop-marks-and-bleed-using-Photoshop/

• Windows Media Player is missing in Set Program Access and Computer Defaults

  I recently discovered that when I wanted to install a default media player, Windows Media Player was absent from "Default programs". When I ran a search on this problem, I had the suggestion that I enable access to Windows Media Player with "Set Program Access and Computer Defaults." However, when I tried this, I found that Windows Media Player was also absent from "Set Program Access and Computer Defaults"! Now, what I want to know is, how to restore Windows Media Player in the list of Set Program Access and Computer Defaults?

  Here's a hint: I do not have full access to Windows Media Player via the start menu.

  Brandon Taylor

  Brandon Taylor

  Hello, Brandon Taylor,.

  We will try to reset the Windows Media Player by using the following steps:

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  Now, go to default programs, Windows Media Player is displayed now?

  If please reply back and let us know if this can help, or if you still need help.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think