Setting the Dimensions through the planning of Performance parameters and error

Similar Questions

• I bought the Plan of Photography - Photoshop and Lightroom. Is it possible to get Lightroom to Acrobat, or buy Acrobat separately as well?

  I bought the Plan of Photography - Photoshop and Lightroom. Is it possible to get Lightroom to Acrobat, or buy Acrobat separately as well?

  Any help would be appreciated!

  The special scheme is a plan, but you can buy an additional subscription to any other program pricing and creative cloud composition plans | Adobe Creative Cloud

• How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  I already have my chart updated in place with a button that will add new lines when pressed.

  Now, I want to clarify that the 1st row is 10 and all the other rows after this increase by 10. It will also allow users to enter any number they want, and the next line will increment of 10.

  Help please.

  Try changing the line button Add the following JavaScript code

  newRow var = Table1._Row1.addInstance)

  If (newRow.index > 0)

  {

  newRow.NumericField1.rawValue = newRow.resolveNode ('Row1 [-1].) NumericField1') .rawValue + 10;

  }

  You need to change this code to match your name on the form, but basically the method addInstance() returns the new row, the newRow.resolveNode ("Row1 [-1]... will get the value of the previous row and then add 10.

  Concerning

  Bruce

• One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  

  Hi, this means that this page is not to be exported when publish you your site. Check and make a right click Export... and change it if you need))

• 39L4363D - cannot set the record time of beginning and end of filling time

  Hello

  I have a problem with my 39L4363DG tv (software 7.1.90.34.01.1).

  I'm not able time of filling time of beginning and end of record setting as described in the [Manual | http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. The menu item "padding-start" and 'end padding time' are disabled?

  Can someone help me and give me advice on how to solve it?

  Hello

  The charging time can be set for the scheduled recording.

  There is also a priority planning
  If the regular time intervals are ensuites to each other and there is more than one minute between the time of the end of the annex i and the next scheduled start time, scheduled recording will be performed correctly.

  When + start time of filling + and + hour of end padding + are value, the start time and end time more is the time the extra minutes.

  If planning time overlap, priority will be given to the scheduled recording starts first.
  When the scheduled recording that began the first ends, recording will switch to the next regular program.
  At that time, according to how much programming time to overlap, the section from the beginning of the next regular program is not registered.

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• Setting the default paragraph unique space and NO space between paragraphs

  I tried to set the default value for MS Office 2007 VISTA to SPACE SIMPLE and checked the box where it says "don't add space between paragraphs of the same style".  I click on default and the window just to say that I'm changing things so that it's the setting by default, but IT NEVER SETS THE DEFAULT.  This is the engine we all in the Office of CRAZY!  Do you know how long it is to have to reset it each time we want to type in a Word document?  There must be a way to set this box to a single space default.  HOW DO WE PROCEED?  Help!  And please do not recommend I go to MS Outlook HELP forum.

  This article may help:

  Default line spacing and default paragraph in Word 2007 spacing are different from the default spacing in earlier versions of Word

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• How to set the session value in setActionListener and get into object EO

  Dear all
  
  How the value value sessin by component setActionListener and get it in entity .impl object?
  
  Kind regards

  You can't and you shouldn't.

  Guess what you are trying to archive:
  You need to implement a service method in the module of your application and call it with your setting. This method can call the VO calling the EO.

  If you provide more information and a use case we can give you better advice.

  Timo

• Connect the large number of parameters and variables between Verstand and model of Labview

  We have an installer of dyno with a chassis PXI-E running Veristand 2014 and 2014, inertia. In order to strengthen the capabilities and timing of the Veristand, I would use models of Labview to perform tasks is not possible by Veristand and inertia. An example of this is to determine the maximum amount of a large number of thermocouples. VeriStand has a comparison function, but it compares two values at once. This makes long and rigid emissions. LabVIEW, on the other hand, has a function which words one to get the maximum items in a table in one step. I need to use Labview to 'send' the thermocouples of 50 or more to the Labview model. In addition to the variables that must be communicated between Veristand and Labview, I also need to present Labview with the threshold and setting parameters. Forums and user manuaIs understand that you must use the connector pane in Labview Veristand System Explorer mapping to expose the inports and isolated villages. The problem is that the part of Labview connector is limited to 27 I/O. How to overcome this limitation?

  BTW. I'm relatively new to Labview and Versitand.

  Thank you.

  Richard

  You can work around this limitation by putting your orders and clusters indicators. Then set the cluster to be required or recommended to indicate whether contained controls are entered or parameters, just normal.

  

• How to use the entry that is provided in the form of report parameters and use it in a field to a report parameter.

  Hi, I'am, creating a new report, which is a combination of ' form_letter & tabular ' style.

  I also created a report with 2 inputs parameter, which is 'to_date' & 'from_date '.

  The value that will be inserted in 'to_date' & 'from_date' in the parameter_form, should be displayed in the report.

  So to do this, I created a field for 'to_date' & added the code for him in the pl/sql Editor.

  the code is as below:

  function boolean return F_TO_DATEFormatTrigger is

  date of f_to_date;

  Start

  f_to_date: =: PF_P_TO_DATE;  VALUE ASSIGNMENT (f_to_date) OF ENTRY OF PARAMETER the REPORT (PF_P_TO_DATE) FIELD.

  return (f_to_date);

  end;

  BUT I GET THE ERROR MESSAGE "THE FOLLOWING LINK VARIABLE IS NOT SET TO REP-0730: PF_P_TO_DATE.»

  I tried to decode the error, but I think that the problem is different. (The code above only works if "PF_P_TO_DATE" was part of the statement of the query, which is one of the columns of database, but PF_P_TO_DATE is a parameter). So can someone please help me with how can I take the value of input parameter and display it on the field in the report?

  Thank you.

  Hello

  Basically, you need to print the date two file - entry mark on your report.

  1. you get just two entry.

  2. in the layout - on header of page - Insert filed-> select source Frm_Date field.

  3. Repeat step 2 for the Date of filing.

  Now you should get that don't you need.

  If this isn't the case, work let me know the details.

• See only the plans of sites facebook and yahoo-can't get to home pages

  When I go on Facebook and Yahoo, all that appears, is what seems to be their site is mapped. I can't get anywhere else, including the home pages.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? The report please come back shortly.

• At the same time perform write and read

  Hello

  I use
  DAQmx NOR-USB-6259

  I have problem with parallel
  run the analog signal (for example 1000 points of writing
  by 1 second) channel Dev1/ao0 physics and at the same time read
  1000 points per second physics channel Dev1/ai0 1
  How to do this?
  I tried to use DAQmxExportSignal, but it does work well, or simply, I
  don't know how to do
  correctly maybe I should use a different
  the function?

  Best regards

  AndrzejS

  Hi Andrzej,

  Yes, it's possible, but with your device not at the same time, just with a little delay (about 1 US).

  The track is almost the same thing, you need to add 2 more channels of analog inputs to your task and use playback of multiple samples. Just check the VB Clk Acq - Int example.

  I can't help with particular code, because I'm not familiar with VB, but daqmx functions are very similar, if this change is 3 click in LabVIEW, then it must also be very easy in VB. You manage tasks, if your task contains more channels HERE you will receive samples of all channels.

  I hope this helps and let me know if I misunderstood something.

  Gabor

• Microsoft Fix it Center - when I try to launch it I get the message 'set the installation Center has encountered an error. If please close and try to run set up later.

  I downloaded some windows updates to June 30. Since my pc guard crashing and freezing. System Restore does not work either - kept the PC freeze. System Restore works now, but only dates back to 4th of July - so clearly something was wrong.

  I'm trying to trouble it Cener as my last hope - but it won't let me run it according to my question.

  What can I do?

  Thank you

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link below to ask your question: http://social.microsoft.com/Forums/en-US/fixitcenter/threads

• to set the variable env for 10g and 11g under single user

  Hi all;

  Hello all;

  I installed 10g on a Linux software.

  I'm going to install 11g s/w on the same system.

  the user is oracle. I'm not scabies .bash_profile.

  Instead of .bash_profile, I intend to use the file.

  How can I run or maintain the env files for the same user.

  approx 10g file:

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  Export ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  Export EDITOR = vi

  file of approx 11g:

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  Export ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  Export EDITOR = vi

  Thanks in advance.

  Remove the semicolon after each line in the file ora11.env

  Copy paste below in ora11.env

  export ORACLE_BASE = / u01/app/oracle

  export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1

  export ORACLE_SID = test

  export PATH = / usr/sbin: / usr/local/bin: / bin

  export PATH = $ORACLE_HOME/bin: $PATH

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib

  Export CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib

  Export EDITOR = vi

  HTH

  Anand

• Workflow to set the field of AD description and computer rooms

  Hello

  I would like to create workflows a little whole AD and local description of the computer.

  If anyone has an idea...

  Thanks in advance

  Please review the scriptable task, entries and links the workflow attached that I created when initially answered your question...

  You can import the workflow attached and test / modify it as you wish.

  Entries of workflow:

  computerAD (AD:ComputerAD) - is the computer object in the plugin announcement that will have its amended description field

  newDescription (string) - the new value of the description of the selected computer object

  Script task:

  The entry script task has both entries of the workflow associated with it to access these values within the script.