Connect the large number of parameters and variables between Verstand and model of Labview

Similar Questions

• Technical support please - mistake made by moving the large number of files and folders to archive HD, lost of metadata and develop settings, how to correct the error.

  Hoping to hear support or senior tech posters that I made a huge mistake by following the instructions of a person who thought they knew of Lightroom, but didn't.

  Mac Pro, OS 10.10.3. 5.7 Lightroom

  Question:

  Moving about 750Go of files and the associated image files from my drive to Studio work TB 3 to a new 2 TB drive Archive. The first set of records, I moved to in Lightroom, that went well but has been very slow to do that I could move only 12 files at one time or the locked system. After looking online I've been advised to copy all folders that I wanted to go in the Finder, simply drag / drop files from one drive to the other and then synchronize from Lightroom. Files moved OK, but as I guess I should have generated. The XMP files in the moved files no longer have metadata or the development parameters.

  I did not do any work Lightroom since that, so I have the old catalog in Time Machine (hopefully!-j' heard that there may be problem with Lightroom and Time Machine catalog). I also have copies of backup of the work unit until I moved the files.

  I have 2 large jobs, I need to change as soon as POSSIBLE, so need to quickly solve this problem or the LR catalog is going to change and I will not be able to go back.

  Ideally, I'd like to talk to Technical Support in order to go through the steps and explain what I did and make sure I don't lose any data. Is there a number to call? The phone tree says no support for LR phone now...

  Good to hear! In the future if you want to move your image to another drive files proceed as I pointed out here: Adobe Lightroom - find folders and files moved or missing

  It greatly reduces the possibility of this kind of problem happens, and when it you will know because the number of folder, number of files, or size on the disk will not match. Try again until they do not match before reconnecting them with the LR catalog. Computers are dumb... then work smarter.

• Duplicate files: I have a large number of directories and files dublicate in "C:\Documents and Settings".

  I have a large number of dublicate files and directories in 'C:\Documents and Settings\Jim\' and 'C:\Users\Jim\' after the upgrade of Windows Vistat Ultimate 64 bit to Windows 7 Professional 64 bit. Why?

  The documents are really in the second folder, Documents and Settings is
  a junction point.
   
  In Vista and Windows 7, "Documents and Settings" is not a folder.
  Vista/Win7 uses a different file structure than XP/don't. Those who don't know
  the names of folders you can be used for, such as "My Documents", "Documents &.
  Settings', etc. are not folders in Vista/Win7. They are the points of junction,
  and are used for legacy programs that have been written to use the XP file
  structure.
  They will redirect the programs to use the Vista/Win7 equivalents records.
  If you keep hidden protected operating system files, you will not see them.
   
  In Vista/Win7...
  The documents & settings-> \Users
  My Documents-> \Users\youraccount\Documents
  My music-> \Users\youraccount\Music
  Application-> \Users\youraccount\AppData data
  etc.
   
   
   
  --
  Dave N.
  MS - MVP (Mail)
  Windows 7 Ultimate
  http://download.live.com/wlmail
   
   
   
  "JFH36" wrote in message news: 47b4c064-b6eb-4551-b2a4-4b2e42a45f75...
  > I have a large number of directories and files dublicate in 'C:\Documents '.
  ' > and Settings\Jim\ ' and 'C:\Users\Jim\' after the upgrade to Windows
  > Vistat Ultimate 64 bit to Windows 7 Professional 64 bit. Why?
  >
   

  Windows 7 Ultimate 64

• How to add the large number of RoboHelp docs to SharePoint version control

  I'm on RH11 and some versions of SharePoint, which I'm not sure. I am able to add a document to both HR SharePoint Versioning (file > Version control), but I must have about 49 000 with version control in RoboHelp.  I was able to get the files in SharePoint, but now I have to get RoboHelp to be managing the large number of files.

  How can I get RoboHelp to give version control a large number of documents at a time?

  Are - you're talking about individual files or projects? I guess that the individual, since 49 000 project files can be a bit heavy.

  If you add a project to version control, RoboHelp will add all the files in SharePoint. This will take a little time (set HR to add it before you go out for lunch or before going home). At the end of the day, you can check in the entire project in a single click. Or you see something else?

  You can still manipulate the files .apj of HR to very quickly add loads of files to a project. If you have files in SharePoint, you can update the FPJ files (use the following script: missing subject Fixer). Then remove the CPD and start the project.

• The # is not my # mysecurity code to us. You have the wrong number on file and I need to access my account. Can you please give a call me to the

  The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.

  Thank you

  George Sedlack

  Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.

• How to query the total number of columns and lines filled with data?

  How to get the number of rows and columns in Exel file data using Excel report?

  Since you have posted this question in the forum of LabWindows/CVI, I guess you want to know how to do with CVI.

  You need to know how to open and activate the Excel data file.

  Depending on the function returns the total number of columns and lines col_count row_count, respectively.

  -----------------------------------------------------------------------------------------------------------------------------------------

  int CountColumnsAndRows (void)
  {
  Error HRESULT = 0;
  CAObjHandle rangeCurrentRegionHandle = 0;
  CAObjHandle rangeColumnsHandle = 0;
  CAObjHandle rangeRowsHandle = 0;
    
  unsigned long col_count = 0, row_count = 0;
    
  Must use the 'A1' property and CruuentRegion count the total of columns and lines, including the drafts!
    
  error = CA_VariantSetCString (& MyCellRangeV, 'A1');
    
  error = Excel_WorksheetRange (ExcelWorksheetHandle, NULL, MyCellRangeV, CA_DEFAULT_VAL, & ExcelRangeHandle);
  If (error<0) goto="">
    
  error = Excel_GetProperty (ExcelRangeHandle, & ErrorInfo, Excel_RangeCurrentRegion, CAVT_OBJHANDLE, & rangeCurrentRegionHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeColumns, CAVT_OBJHANDLE, & rangeColumnsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeColumnsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & col_count);
  If (error<0) goto="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeRows, CAVT_OBJHANDLE, & rangeRowsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeRowsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & row_count);
  If (error<0) goto="">

  Error:

  CA_VariantClear (& MyCellRangeV);
  CA_VariantClear (& MyVariant);
  ClearObjHandle (& ExcelRangeHandle);
  ClearObjHandle (& rangeCurrentRegionHandle);
  ClearObjHandle (& rangeColumnsHandle);
  ClearObjHandle (& rangeRowsHandle);
    
   
  If (error<>
  ReportAppAutomationError (error);
    
  error return;
  }

• I have pse7 but have lost the disc number - have biotic and want to install in the new laptop-downloaded Adobe but serial no not accepted

  I have pse7 but have lost the disc number - have biotic and want to install in the new laptop-downloaded Adobe but serial no not accepted

  Please check: error: "serial number is not valid for this product". Creative Suite

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• Manage the large number of users

  Dear all:
  
  We get a pre Prod database which we may have to create around 1200 users who have account within the database. Here are my concerns:
  
  1. What is the best way for users to connect to the database? We used traditionally file Tnsnames.ora but it would be tedious to go with that with so many users. We have heard of Active Directory that could help users to connect to the database. Is a proven way to go and how to implement it?
  
  2. What are the parameters we need to change/change in our spfile/init to welcome a large number of users? We are and we will use dedicated connections. It seems to me that we have to change the setting to a number greater than > 1200 at #process. Memory management we define automatic as SGA and PGA managed by Oracle. We have already appointed a large part of memory(8GB) to Oracle to make the management of SGA/PGA both for us.
  
  3. what other issues we must fear for the database when so many users log in the database? Most of these users won't use any storage to create objects.
  
  
  Any help, advice, suggestion will be highly appreciated.
  
  Thank you.

  1. in fact, it is quite easy to write Windows scripts to distribute files tnsnames.ora, and it will be cheaper and easier to manage than the OID (Oracle Internet Directory), which is the LDAP solution to replace tnsnames.ora for searches.

  2. in the function if you use the shared server or dedicated connections. If you are using dedicated connections, then the process is the main. Allow any dead or inactive sessions, process etc., so less substantive 1500.

  3. This isn't a lot of users. Some databases out there takes care of hundreds of thousands of users. You must work on how many of these users will be active at the same time, and what will be the volume of transactions. For example a large report can use more resources than 1000 users, data entry.

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• Approach to analyze the large number of XML files in the relational table.

  We are studying the possibility of XML DB to treat a large number of files from same day.
  The goal is to parse the XML file and store it in several relational tables. Once in the relational table don't care us about the XML file.
  The file cannot be stored on the file server and must be stored in a table before analysing because of security concerns. A third-party system will send the file and it will store in the XML database.
  The file size can be between 1 MB to 50MB and high performance is very that much is expected of other wise men, that the solution will be discarded.
  Although we have no of XSD, the XML file is well structured. We are 11g Release 2.
  
  Based on the reading, that's what my approach.
  1. CREATE THE DONNEES_XML TABLE
  (xml_col XMLTYPE)
  XMLTYPE xml_col STORE AS BINARY XML NAVIGATION;
  
  2. third will store the data in the donnees_xml table.
  3. create XMLINDEX on the unique XML element
  4 create XMLTYPE views
  CREATE OR REPLACE FORCE VIEW (V_XML_DATA)
  SType,
  Mtype,
  MNAME,
  ROT
  )
  AS
  SELECT x."Stype"
  x."Mtype."
  x."Mname"
  x."ROT".
  OF data_table t,.
  XMLTABLE)
  ' / SectionMain'
  PASSAGE t.data
  COLUMNS Stype VARCHAR2 (30) PATH "Stype"
  Mtype VARCHAR2 (3) path "Mtype."
  MNAME VARCHAR2 (30) PATH "MNAME"
  ROT VARCHAR2 (30) PATH "OID") x;
  
  5. loading mass analysis of data in the staging table based on the column in the index.
  
  Please comment on the process that precedes any suggestions that can improve the performance.
  
  Thank you
  AnuragT

  PASSAGE t.xml_col<--WHAT will="" passing="" here="" since="" no="">

  If you are using an XMLType Table, instead of an XMLType column reference, you are referring to the contents of XMLType while using the NICKNAME "OBJECT_VALUE" column

  If--> t.object_value

• How to combine the large number of tables of pair key / value in a single table?

  I have a pair key / value tables of 250 + with the following features
  
  (1) keys are unique within a table but may or may not be unique in the set of tables
  (2) each table has about 2 million lines
  
  What is the best way to create a single table with all unique key-values of all these paintings? The following two queries work up to about 150 + tables
  

  with
    t1 as ( select 1 as key, 'a1' as val from dual union all
            select 2 as key, 'a1' as val from dual union all
            select 3 as key, 'a2' as val from dual )
  , t2 as ( select 2 as key, 'b1' as val from dual union all
            select 3 as key, 'b2' as val from dual union all
            select 4 as key, 'b3' as val from dual )
  , t3 as ( select 1 as key, 'c1' as val from dual union all
            select 3 as key, 'c1' as val from dual union all
            select 5 as key, 'c2' as val from dual )
  select coalesce(t1.key, t2.key, t3.key) as key
  ,      max(t1.val) as val1
  ,      max(t2.val) as val2
  ,      max(t3.val) as val3
  from t1
  full join t2 on ( t1.key = t2.key )
  full join t3 on ( t2.key = t3.key )
  group by coalesce(t1.key, t2.key, t3.key)
  /
  
  with
    master as ( select rownum as key from dual connect by level <= 5 )
  , t1 as ( select 1 as key, 'a1' as val from dual union all
            select 2 as key, 'a1' as val from dual union all
            select 3 as key, 'a2' as val from dual )
  , t2 as ( select 2 as key, 'b1' as val from dual union all
            select 3 as key, 'b2' as val from dual union all
            select 4 as key, 'b3' as val from dual )
  , t3 as ( select 1 as key, 'c1' as val from dual union all
            select 3 as key, 'c1' as val from dual union all
            select 5 as key, 'c2' as val from dual )
  select m.key as key
  ,      t1.val as val1
  ,      t2.val as val2
  ,      t3.val as val3
  from master m
  left join t1 on ( t1.key = m.key )
  left join t2 on ( t2.key = m.key )
  left join t3 on ( t3.key = m.key )
  /

  A couple of questions, then a possible solution.

  Why the hell you have 250 + tables pair key / value?

  Why the hell you want to group them in a table containing one row per key?

  You could do a pivot of all the tables, not part. something like:

  with
    t1 as ( select 1 as key, 'a1' as val from dual union all
            select 2 as key, 'a1' as val from dual union all
            select 3 as key, 'a2' as val from dual )
  , t2 as ( select 2 as key, 'b1' as val from dual union all
            select 3 as key, 'b2' as val from dual union all
            select 4 as key, 'b3' as val from dual )
  , t3 as ( select 1 as key, 'c1' as val from dual union all
            select 3 as key, 'c1' as val from dual union all
            select 5 as key, 'c2' as val from dual )
  select key, max(t1val), max(t2val), max(t3val)
  FROM (select key, val t1val, null t2val, null t3val
        from t1
        union all
        select key, null, val, null
        from t2
        union all
        select key, null, null, val
        from t3)
  group by key
  

  If you can do it in a single query, Union all 250 + tables, you don't need to worry about chaining or migration. It may be necessary to do this in a few passes, depending on the resources available on your server. If so, I would be inclined to first create the table, with a larger than normal free percent, making the first game as a right inset and other pass or past as a merger.

  Another solution might be to use the approach above, but limit the range of keys with each pass. So pass we would have a like predicate when the key between 1 and 10 in every branch of the union, pass 2 would have key between 11 and 20, etc. In this way, everything would be straight inserts.

  That said, I'm going back to my second question above, why the hell you want or need to do that? What is the company you want to solve. There could be a much better way to meet the requirement.

  John

• How to recover the large number of columns for all items at once

  I have a table (T1) with a large number of columns (50). I am building a page on which I would like to consolidate these columns in some regions:
  
  Region: has
  Items i1 - i10
  
  Region: B
  I11 - i20 items
  
  Region: C
  I21 elements - i30
  …
  Etc.
  
  The majority of the articles on this page are extracted from the same table (T1). So far, the type of each source element has the value SQL query and each item has the motion of the source is defined as:
  
  SELECT column1 FROM t1 WHERE t1id =: global_item
  
  What is the best practical approach to retrieve values for all items on this page? Is there a way to retrieve all the columns point at the same time, something like:
  
  SELECT column1, Column2, Column3, column50 FROM t1 WHERE t1id is: global_item
  
  Instead of:
  
  I1 point source:
  SELECT column1 FROM t1 WHERE t1id =: global_item
  
  Point source i2:
  SELECT Column2 FROM t1 WHERE t1id =: global_item
  
  Point i3 source:
  Column3 SELECT FROM t1 WHERE t1id =: global_item
  …
  Item i50 source:
  SELECT column50 FROM t1 WHERE t1id =: global_item
  
  For each item on this page, when they are displayed?
  
  Thank you for your time.
  
  Daniel

  Set the source of static assignment type item and delete individual values of source of SQL query. Create a process before the header PL/SQL along the lines of

  begin
  
    select
              column1
            , column2
            , column3
              ...
            , column50
    into
              :i1
            , :i2
            , :i3
              ...
            , :i50
    from
              t1
    where
              t1id = :global_item;
  
  end;
  

  OR

  Create an automated process line go through the wizard for the table T1, then set the Source Type of the database column and the source values for each item in the name of the corresponding column in the T1.

• I unstalling a large number of programs and my computer still a little slow when it comes to video games

  The game I'm trying to play is now called Vindictus. Whenever I'm trying to play, it skips or freezes and race very slowly.   I was remove that program from my computer, but nothing seem to work. I have that 90 programs that I altogether and the rest I don't know if I need it or not. I don't want to remove some programs that I need for computer.

  I know you have vista but your system, dell, hp, compaq?  It is useful to know if you can find specifications on units.

  RAM is the amount of memory you have on your system.  I think that Windows Vista came with 1 GB of memory minimum.  Some have had more.  Right-click on desktop and select Properties.  Under system, you will see (RAM Ram):? GB

  If you open my computer, you will see computer do and the size of the disk + the amount of free space

  EX: Compaq (c :)) free from 150 GB to 99 GB

  The largest number is the size of your disk.  The lower is the amount available for you.

  Windows Vista need at least 2 GB of ram to run faster or better.

  Right-click on my computer and select Manage

  Click on Device Manager and you will see a list of hardware attached to your computer

  Click + next to his video and game controllers

  Right click and select Update driver.  Restart your game.  If this does not help, try

  Uninstalling the driver reinstall it on reboot.  Does that help?

  This article will help you free up space on your hard drive

  http://www.HelpWithWindows.com/windowsxp/HOWTO-16.html