How to set the session value in setActionListener and get into object EO

Similar Questions

• How to set the session value to field item?

  Problem: The table insert source column is different from the column I get data for the update. I assign session by a process during extraction value but this value does not get assigned to the field. ?? Can someone give me a solution to this?
  Thank you

  Hello

  When the extraction process runs while recording for the form, it will use the values that exist in the folder, thus crushing any value you defined in the session.

  One thing you could try...

  1 create an element of application - through shared components - called, say, G_DEFAULT_VALUE
  2. on the page element that needs this value, type: G_DEFAULT_VALUE in the parameter of calculation calculation Post
  3 - instead of set point on page in your process/calculation, the value of the element of the application instead

  Then, regardless of the value on the record, the value of the application element is used instead. If this is not required in all cases, set the application to null element and use the following options for the calculation of calculation of post parameter:

  NVL (: G_DEFAULT_VALUE,: PAGEITEMNAME)

  Then, if the application element is null, the value of the page element (that is to say, the value of the record) will be used instead.

  Andy

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  I already have my chart updated in place with a button that will add new lines when pressed.

  Now, I want to clarify that the 1st row is 10 and all the other rows after this increase by 10. It will also allow users to enter any number they want, and the next line will increment of 10.

  Help please.

  Try changing the line button Add the following JavaScript code

  newRow var = Table1._Row1.addInstance)

  If (newRow.index > 0)

  {

  newRow.NumericField1.rawValue = newRow.resolveNode ('Row1 [-1].) NumericField1') .rawValue + 10;

  }

  You need to change this code to match your name on the form, but basically the method addInstance() returns the new row, the newRow.resolveNode ("Row1 [-1]... will get the value of the previous row and then add 10.

  Concerning

  Bruce

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• How to set the return value of the method to the /outputText inputText field

  Hello

  How to set output return value method of a /outputText adf inputText field

  Concerning

  sevanan

  Well put method's return value to a managed bean variable.

  Create a variable in the bean and set the return value to this variable.

  the inputText and outputTextValue to this managedBean.variable value

  That's all...

  and add partial trigger for inputText programmaticly

• How to set the default value of the component selectOneChoice in the table to the ADF

  Hi all

  I use jdev 11.1.1.6.0 version.

  I used an adf table in which an attribute is selectOnceChoice.

  To create the table and selectOneChoice I used the data control java bean.

  and drag and drop a table and after that I have drag and drop one of the attributes as selectonechoice and linked with the return of the method list as < key, value > pair.

  I want the default value to select only one option in each attribute rows.

  I checked with simillar issue on post next, but not yet resolved.

  My jspx code is

  
  <af:column id="c11"
                                           headerText="Invoice To" >
                                      <af:outputText value="#{row.invoiceTo}" id="ot19"/>
  <af:selectOneChoice value="#{bindings.invoiceTo.inputValue}"
                                                      label="#{bindings.invoiceTo.label}"
                                                      required="#{bindings.invoiceTo.hints.mandatory}"
                                                      shortDesc="#{bindings.invoiceTo.hints.tooltip}"
                                                      id="soc3"
                                                      autoSubmit="true"
                                                      valuePassThru="true">
                                    <f:selectItems value="#{bindings.invoiceTo.items}"
                                                   id="si4"/>
                                  </af:selectOneChoice>
  </af:column>
  
  
  

  where invoiceTo is the table attribute and the invoiceTo attribute is dragged and dropped as a SOC function list Source data mapped data value with the List attribute

  and the display attribute

  Data value = invoiceTo List = lovMasterKey attribute

  Display attribute = lovMasterValue

  that list is maintained at < lovMasterKey, lovMasterValue >

  According to the value of invoiceTo line, it should show as default value is selectOneChoice, but its showing no not as a default value.

  Please, help me how set the default value of selectOneChoice in the table according to each value line invoiceTo.

  Thank you all for the help on this issue.

  Problem has been resolved.

  Reason for this was used

  It is solved using code used for the list built for selectoneChoice more

    List lovMasterList = new ArrayList();
  
  SelectItem siItem = new SelectItem();                      
  
  siItem.setLabel(objAfCmnLovMasterListVO1.getLovMasterValue());
  
  siItem.setValue(objAfCmnLovMasterListVO1.getLovMasterKey());
  
    lovMasterList.add(siItem);
  

  Now, I used the code where the line below. InvoiceTo is the key and row.invoiceToItems are the list of articles for selectOneChoice.

  Thank you very much...

• How to set the default value of selectOneChoice

  Hi all
  I have two selectOneChoice (soc1 and soc2) in two respective pages with the same datacontrol. Now, I need set the default value of soc2 according to the value selected in soc1.
  For example: -.
  If the user has selected a value in soc1 say 'Bag' in the list then it must affect the default in soc2 as 'Bag' when loading the second page. The time as selectOneChoice was created using the same data contol.
  
  How can I achieve this?
  Please suggest.

  You can try with this?

  Place curIndex pageflow scope and use

  This.SOC2.SetValue (Integer.ToString (curIndex));

  ~ Abhijit

• How to set the default value in the select list to cascaded

  Hello
  I use Denes Kubicek cascade example list of selection http://htmldb.oracle.com/pls/otn/f?p=31517:119
  
  And I want to give cascading the selection list with a default value. So, anyway, I use this application process:
  
  < pre >
  BEGIN
  OWA_UTIL.mime_header ("text/xml", FALSE);
  HTP.p ('Cache-Control: non-cache');
  HTP.p ('Pragma: non-cache');
  OWA_UTIL.http_header_close;
  HTP.prn ("< select >");
  HTP.prn ("< option value ="' | 1 |) "" > ' | '- all employees-' | ' < / option > ");"
  
  FOR c IN (SELECT ename, empno
  WCP
  WHERE mgr =: cascading_selectlist_item_2)
  LOOP
  HTP.prn ("< option value ="' | c.empno |) '">' || c.Ename | ("< / option >");
  END LOOP;
  
  HTP.prn ("< / select >");
  END;
  < / pre >
  
  How can I select for example empno default 1000?
  Thanks in advance.
  Jacob

  Jakob,

  In this case, your default value is

  HTP.prn (')' || "- All employees - | '');

  However, you can set the default value in the loop as you want. You just say that is your default - first, second, third...

  In the list select ajax there's no submit and no calculation of values then I assuem your default is the punch one you wan to display when a selection list has been changed?

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• How to set the minimum value of a graphic waveform window?

  I have a graphics property of waveform "minimum value", but the graph is not take the value that I gave him. He tends to zero, as well as the first two sliders that I put on the graph. The maximum value "will be" no problem, just like the second slider value. Everyone knows about this problem? Here's a screenshot...

  Is there a reason why my chart does not have what I have to say?

  Thank you

  Sometimes you may have problems if the new minimum is higher than the maximum of old.  Try to write at least again in another node in property after you set the maximum value

  Without seeing your VI and some parameters of the example, (old max and min) new max and min, it is otherwise difficult to say.

• ODI 11 g | How to set the default value in the Interface mapping?

  Hello
  I m interpreting data OID of Oracle DB load target FOR Hyperion Essbase.
  Its my requirement to set the default value for any size target source system it becomes same record for a specific column.
  I thought that it would be fixed in the Interface, but I was not able to do.
  
  Example:
  Target Essbae Dimension
  Size of account must have the value "FixAccount".
  Dimension of the year must have the value "FY13.
  Dimension of the view must have the value "ActiveView.
  
  looking for your
  
  Concerning
  Sher

  Yes

• How to set the threshold value for single tablespace in the 11g grid control

  Hello
  
  I want to set the threshold value for a single tablespace in the 11g grid control,
  Please give me a navigation path.

  Sandy wrote:
  Can you please give me the full navigation path?

  go to the target--> databases
  Select the database that you want to set this alert to
  Link select settings and policy settings

• How to set the initial value for a single radiobutton in a group of Radio buttons

  Hi all
  
  I have a radiogroup with 3 buttons. The names of the RadioGroup are driven out of a XXVO.
  
  3 Radion buttons:
  
  + 9
  * XX
  * XXX
  
  When loading the Page I want to make an XXX option button to be the default, please suggest how.
  
  Note: The radiobutton values come from VO
  
  Thank you

  Hello

  XXCONTACT_ADDR_BUTTON1 - is the value of the radio button to select the right...

  Very well.. :))

  Concerning
  Meher Irk

• How to set the default value of a column from the value of the 2 columns given

  Is it possible to set the default value for a column A, as the concatenated values of columns B and C of the create table statement itself without using the trigger.
  
  for example, in a line, if column B is 'James' and column C is "smith" then the column has must be "james Smith".
  in another line if column B is 'Bob' and column C is "Taylor" then column should be "Bob Taylor"
  
  Thank you
  YG

  Yes, it is possible. But what is your version of the database? Try to use "virtual column. Search for a virtual column in the following link.
  http://www.Oracle.com/technology/pub/articles/Oracle-database-11g-top-features/11g-schemamanagement.html
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_7002.htm