Setting the resolution for S1931 LCD screens

Similar Questions

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• How to set the resolution on in my XP operating system installation.

  I have a computer that had a copy pirated XP, I bought a genuine copy of XP for the computer I built, however, I was unaware that I could use it only for a computer, and I tried to install it on the computer with the pirated XP operating system.  Then, I was unable to adapt to the resolution on the computer that has the OS piriated.  I then bought another windows XP OS, installed on the computer including the resolution and nine I couldn't settle, (who had the OS piriated), however, I still have the same problem of not being able to set the resolution from 600x400dpi. My attempt to use the first copy of XP on my second computer was planting a virus on it?  What should I do to solve the problem?

  After doing a clean install of the operating system, you must then install the drivers for all your hardware. In your case, install the video card drivers will allow you to change the resolution.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• Select the resolution for the export jpeg or png

  Hello
  How to set the resolution of an image when you export in jpeg or png?
  I imported a 300 x 150 cm in 150 dpi PNG image, I did a small crop, then when I want to always export to 150 dpi, but photoshop automatically changed my resolution to 72 dpi. When I go to export preferences, I can't see or edit the default 72 dpi value, I can see how to set the resolution of the new document, but only for export.

  On illustrator, I can choose the resolution when I save my image but for photoshop, I don't know...

  
  I hope I was clear enough, thank you very much for your help

  If you want to keep the ppi, you do a save as.

  Export (and save for Web) are designed for web images, where PPP is not relevant. For the display, only pixel issue dimensions.

  You can also open the image exported in Photoshop, go to Image > Image size, and then change the ppi in 150, with Resample unchecked.

• How to set the password for HARD drive?

  Hello

  Could someone help me please by setting the password for TOSHIBA STOR. E ART 3 (1 TB 2.5 ") HARD DRIVE?

  Hello

  I n t have this external HARD disk, but Toshiba pre-installed some additional software on this subject for the creation of HARD drive password?

• Satellite L505 - 14 d - Starcraft II - cannot set the resolution of 1366 x 768

  I recently bought this laptop, it has an ATI Mobility Radeon HD 5165 HyperMemory graphics card, however, when I installed the game Starcraft II, and tried to change my graphics settings, told me that my video (could say graph, or display card, I do not remember) card was not recognized, and that I might want to check this... I thought, well, that there is probably no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  This starts to become quite annoying, not a HUGE issue by any means, but still, I would like to get this issue resolved. ;)

  My apologies if you have problems to understand what I mean here, that English isn't my mother tongue. Do not hesitate to ask me if you need clarification on anything whatsoever.

  Hello

  > not thought, well, surely this is no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  Are you able to set the resolution of 1366 x 768 laptop s display settings?

  If Yes, then I guess that this has nothing to do with the laptop but with the game settings.
  Maybe the game is unable to use a higher resolution because of the pilot or the graphics card compatibility.

  I played a lot of games in the past on my laptop and to be honest game display settings have nothing to do with the general display resolution settings. My laptop resolution is 1400 x 1050, but the different games are available at 1024 x 768 due to the better performance

• How to set the resolution to a VI (NOR-IMAQdx)?

  Hello.

  I can set the resolution very well with the video Mode able & Automation Explorer, but I will in my VI as well.

  I found the property node named 'vidéo Mode' and the problem is that I don't really know, what I have to write in it? I want to reduce my resolution to

  160 x 120

  Thanks in advance

  When I run the VI list of video Modes, it shows me 0(160x120), 1(320x240)... If you run that first of all, it should show you. You could also count what position it is in the list of Max (start at 0). I'd stabbed to 0.

  Mike

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Hello Pidcock,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.

  I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!

• How can I get the opening for an enlarged screen screen

  Original title: opening screen

  How can I get the opening for an enlarged screen screen

  If you are talking about an Internet Explorer page, three options.
   
  
  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
    
   
  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
   
  
  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html 
   
  
   
   

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• How to set the color for background ChoiceBox point to ChoiceBox with css?

  How to set the color for background ChoiceBox point to ChoiceBox with css?

  I need to change the backgound color list items.

  I tried with the following code, but it's not help to:

  {.context-menu .choice-box

  -fx-background-color: Red;

  }

  .choice-box .menu-item {}

  -fx-background-color: red;

  }

  In Java 8, either of your selectors should work.

  In Java 7 (JavaFX 2.2), you need of the following workaround:

  #choice-box-menu-item {
       -fx-background-color: red ;
  }