setting up dual monitor for UltraVNC

Similar Questions

• setting up dual monitor for Windows Server 2008r2

  Hello

  as you can see from the photo, I go to control panel-> appearance and personalization-> display-> screen resolution, and my computer does not recognize that there is a second screen, and as you can see from the picture, I can't make adjustment. Is there anything else I need to do?

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Setting up dual monitor

  I have a brand new out of the box H8 1360 T and I'l want to set up two monitors. So far, although there are several DVI ports on the machine, I was able to get a single monitor to work (off the coast of the graphics card as the difference for internal ports).

  Suggestions?

  I was unable to find a LG Flatron W2252DQ but a LG Flatron W2252TQ happens instead. According to the specifications of the W2252TQ monitor, it takes in charge the VGA and DVI - D inputs. Please confirm the model number and look at the back of the monitor for the input connections. Post back with more details.

  It seems that the HP vs19c only supports a VGA connection.

  If the information above is correct, you can use the adapter DVI / VGA port on rear #4 connect the HP vs19c monitor and buying a DVI - D cable to connect the computer to the monitor LG Flatron W2252TQ on port rear #3.

  Please send Bravo

• HP Elitebook 840 G1: Newbie Question: how to set up two monitors for HP Elitebook and Ultraslim Dock

  I have therefore two monitors EliteDisplay E231 that I would use to set up a dual display screen. They have all two cables to VGA connection, but unfortunately the ultraslim dock has only a VGA port on the back. I tried to plug in the dock and the other to the computer itself, but that has not worked.

  How can I go on the establishment of a dual monitor set up? Is this possible?

  Hello

  You need only. The link above, it's in the box:

   

• Setting up dual monitor does not no - one another display not detected

  I connected a second monitor (Acer V173) for my (AMD Radeon HD 7770) graphics card. Update the video card driver. I connect to my graphics via a Display Port/DVI to VGA connector card (the monitor has no DVI). And it is not working properly. Is there a way can I fix?

  DisplayPort sends a digital signal. He can't drive an analog (VGA) monitor.

  Only DVI - I includes an analog signal. DVI - d digital only.

• Dual monitor for 580?

  I have a Dell Inspiron 580 s.  I see that there is no other ports to plug in a monitor or an adapter.

  Is there a way I can plug a second monitor?  I use the computer for work and a second monitor would be a great help.  I've read a few things on USB monitors, but I didn't know if it works in my case.

  Hi NWABCS,

  Please let us know which video card is installed on the system. You can use a VGA or DVI splitter to connect two monitors.

  For your reference, check out these pictures:

  VGA

  

  DVI

  

  If you have additional questions, feel free to contact us.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• (Redirected) How to set up two monitors for Desktop 3647

  Hi all

  I have a (small) desktop Dell Inspiron 3647. I tried the two screens of installation of this system and I need some help here.

  1. What graphics card is supported on this, and where can I get (India)?
  2. System is to have port HDMI can I use for the second monitor, if work, it is mirrored view or expanded view?
  3. Or y at - it another option?

  Request for assistance on this.

  Thanks in advance!

  Agnes Kumar

  Best of this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• dual monitor for a slimline 7620n

  can someone help with how to get a second monitor working on this slimline?

  Hello

  The bad news is that in the HP 7620nmotherboard has a video card integrated with a single external video output port. It is possible to use two monitors with a PCI video card, but food in the 7620n is only 108 watts which is not enough.  The 7620n is no longer supported by HP, because it is more than 5 years.  You should consider a replacement PC.

• Dual monitor for Compaq Presario?

  I have a compaq Presario SR5710Y w / vista operating system. I tried to install two screens on it. I used the edge video card as well as the connection of a new video card and the display properties displays only a single screen. What should I do? Help, please!  Michael

  It should support the double video. Here is a sample video, part of a series http://h30428.www3.hp.com/?rf=sitemap & fr_story = b24b05699c57c5e2d1dd902763d308b232920b9c & jumpid = reg_R1002_USEN

  See you soon,.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• I have a Setup dual monitor.  When I paste develop settings from one image to the other, Lightroom going on the active window.

  Strange problem.  5.5 Lightroom.  Windows 8.1. Setting up dual monitor.

  I am processing a lot important photos.  I have #1 monitor set as my main to develop the window with #2 monitor configured only to display a larger version of the image, I work with. If I copy the parameters of development out of a picture and try to paste them on another image, Lightroom will increase from the #1 to the monitor #2 monitor in the main window to develop and does not display anything on the monitor #1.

  If I then try to paste develop settings on another image on the monitor #2, LR then displays a larger version of the image, I have been working with the #1 monitor.

  To work like I want to, I have to constantly drag my develop the window back to the #1 monitor whenever I try to paste the settings on a new image of development. How can I make this stop?

  I have similar (but different) problems dual monitor. Just posted this on my thread unanswered. It may be useful:

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• HP EliteDesk 800 DM G1: Setup dual monitor HP EliteDesk G1 DM 800

  Type a basic question, but I can't find definitive answers so I have but I would ask here.

  I'm setting up a people that I'm working with two monitors for the HP EliteDesk 800 DM of G1, which she works.

  I provided a VGA/VGA splitter. I used to connect the two monitors on the port VGA HP VGA split.

  Both monitors show the office but in the control panel display, it detects that a monitor. The views are just duplcated. I have tried everything I can think of getting detect it to work, but it will not just see the second monitor.

  I've updated the driver without change.

  My questions are:

  I'm assuming that the problem was that I used a vga/VGA splitter.

  Should what cable I use to set up two monitors for this PC?

  Thank you!

  Hello

  VGA Splitter splits just the actual display, you'll be just able to reproduce with a dispatcher.

  You can not extend.s

  You can use the display cable and cable vga for two monitors

• How to add an external monitor for Pavilion dv6000z

  I have an extra monitor and I have pluged it in. computer had a fit

  Hello

  Connect the external monitor to the laptop using a VGA or HDMI cable, and then press Fn + F4.

  It should toggle the display on the screen.

  If you press Fn + F4 once, then, it goes to the external screen

  If you press twice: she will display on both

  You can also adjust the settings by going to display settings. Here are some links to the steps:

  Setting up dual monitor is easy in Windows 7

  Setting up dual monitor

• [JS SUI] If you use a dual monitor, how to set the location to see the window?

  If you use a dual monitor, (SUI) window is displayed on the main screen.

  I want to display the window (SUI) based on the location of InDesign.

  How to get location of InDesign?

  Thank you.

  app.activeWindow.bounds will give you the coordinates of the window further in Indesign. $.screens will give you information on the displays. You can use these two properties to deduce the position of indesign.

• How to use an external video monitor for just the image being set?

  I would use my external HD monitor as a single image display in Photoshop that I adjust

  the image, similar to what I do in Final Cut Pro to display full screen of the external video monitor. 

  Anyone have to do this?  rather than simply dragging the full interface of the PS to the external monitor,

  and stretching on to fill the screen on the larger screen?

  Duh!  Now I feel real stupid.  The solution was very simple for me, using my MacBook Pro, Intel processor

  OS 10.8.5, with outputs of Mac screen, through to DVI converter, feed my Dell HD 1920 X 1200 monitor.

  There is no instructions for it, but I just click and drag in the "document" tab in the public Service

  Center the window interface and drag it on my external monitor.  And the controls, settings, et al.,.

  work therefore monitor on the image in the external hard drive.  And Mac do rotations display preferences

  for this monitor for my vertical images.  Your Dah!

  Thanks for all your comments, folks!