[JS SUI] If you use a dual monitor, how to set the location to see the window?

Similar Questions

• How to hide the icon of Timbuktu pro, if you use a dual monitor?

  Original title: TIMBUKTU Pro

  Hello

  Is it possible to hide the icon of TIMBUKTU Pro, if you use a dual monitor?
  Either way, TIMBUKTU Pro is a program to monitor a machine without noticing that they are under surveillance.
  Thank you.
  Kind regards
  tan111

  Hello

  I "d suggest that you contact the manufacturer for the best help on the issue.

  http://www.Netopia.com/software/products/TB2/win/

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• I use yahoo mail. If I copy and paste a link in an email to a friend link is not under tension and the recipient must copy and paste the link into the address bar. I don't get this problem if you use internet explore. How can I solve this problem.

  This happens under xp and windows 7.

  On any webmail service you use, there should be an icon in the message composition window to insert a link. In this forum, hover your mouse over the symbol of the 'chain' at the top of the box "Post a reply" and a ToolTip will appear the message "Insert link...". ».

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• When you use word, outlook or any application on the Web, when type 'w: it triggers the function Tab.

  I have a user within our organization with a strange problem.

  When you use word, outlook or any application on the Web, often his typewritten letter T triggers tab.
  As it is to type the tab get triggered when it hits the letter 'T' on the keyboard.
  To eradicate this incident I tried
  1. the new roaming and local profile.
  2 keyboard has changed.
  3. reimagee the machine.
  4 assigned a new machine with a new keyboard and mouse.
  5. checked for ease of access and found that it turned off.
  6 are there any keyboard shortcuts in MS word either.
  Any help will be appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

   

  Hope this information helps.

• Is it possible to resize all work plans at the time the way that you used to be able to do in the configuration of document?

  I have a document with 20 work plans. When I resize a that only changes that are. I'm in CS5. Is it possible to resize all work plans at the time the way that you used to be able to do in the configuration of document? Thank you very much!

  Wade_Zimmerman wrote:

  It's a good script but t vrry does not resize some plans of work and not wouldn't

  @ Wade

  You can recode and a confirm in the loop to determine if you want to resize the work plan current in the iteration of the loop, if no installation then jump her, if yes then prompt for sizes and move forward. Then you can resize regardless of those that you wish as such, some and not others. You can even distinguish with each confirm and ask what work targeted plan by displaying its name. I tested this approach and it seems to work ok, but not super stylish, of course, because if you have tons of work plans, it would be a large number of guests/entry. You could lesson prompts by combining the width/height in a single guest. But then again, even at this time sound just as effective to resize each manually via the window of work plans, probably the same amount of work/time user input processing and the targeting of individual work plans. You could perhaps also create script window for multiple entry for plans of work desired, may be based on the selected and build your dialogue window accordingly, I suppose that, at this time, it would provide a more effective approach for this kind of thing that you seem to be describing.

  But that all said that we would be well beyond the original request that CarlosCanto already so generously filled. He might have some comments on your comments.

• HP Pavilion h9-1180 several monitor - how to set up?

  Hello

  I just opened my office and I'm setting up. I'm setting up multiple monitors, but that a single monitor is picked up. There are 1 socket DVI works, which covers the 2 which had on them and they do not seem to work. I downloaded the driver and Catalyst Control Center came, but does not seem to pick up the second monitor.

  What Miss me?

  Thank you!

  Ryan

  Here are the specifications of your monitor LCD HP s2031's. This monitor has DVI - D (digital) and inputs (analog) VGA. Here's the Cintiq21UX user manual. According to the user manual, the Cintiq21UX has a DVI - I cable seal and comes with a DVI - D adapter cable and a VGA adapter cable.

  Given that both monitors support DVI - D and VGA and the computer supports the DisplayPort, HDMI, DVI - D and VGA (via an adapter DVI / VGA), there are a number of ways to connect to the computer for the monitors. For better clarity of video output, you must connect a monitor (my suggestion is the Cintiq21UX) using the other monitor (HP S2031) using an HDMI-DVI and DVI adapter / cable or a DisplayPort-DVI adapter/cable.

• How to set the pixels for the softer - edge, in a design? I use PhspCS5 TRIAL grateful for help!

  First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better

  visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have

  greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines

  pixels, which appear on the 'place '.  I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)

  and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged).  So going

  back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"

  I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the

  same color II had chosen.  Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go

  on the 'design' say after a break for tea, etc.  ?????  (    :

  I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about.  I save pdf (1) and a jpeg.  Hope that this sounds

  like what we "do"... When we know much more than me.

  And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs.  Are there

  another of Adobe products, I would have to do this.  Free hand has not worked so well, so far.

  I'm in advance, so grateful to you - anyone you may, for your help.  I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71

  and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW

  Please post in the Photoshop forum.

  http://forums.Adobe.com/community/Photoshop

  Bob

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• What software to use to open a file .igx in the Windows environment

  What software to use to open a file .igx in the Windows environment

  Hi Docsri,

  The IGX file type is primarily associated with ' iGrafx FlowCharter / iGrafx Process' by iGrafx LLC. A graphical process simulation and modeling program.

  You can use the software provided by ' iGrafx IGX to open files in Windows.

  Frequently asked questions

  http://www.iGrafx.com/products/Flowcharter/14/FAQs.html

  Evaluation software downloads

  http://www.iGrafx.com/downloads/trial.html

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• whenever I try to certify a document using my E-token brazilin, it appers: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  I would be grateful if someone could help me. Every time I try to certify a document using my E-token brazilin, it appears: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  Problem of this sort occurs generally when the driver that supports your token is not fully compliant with all standards. Some signature applications are mild for some of the discrepancy and you can still use your signature token in these applications. Acrobat is more strict about this.

  Without actually having your token, it is difficult to continue the investigation.

• How to set the value of QUERY using PL/SQL process?

  Hello
  
  I use APEX 4.2...
  How to set the value of the REQUEST using process of PL/SQL which lies before the header - where the value of the REQUEST should appear on the URL?
  
  Kind regards
  Fateh

  You cannot set a value of demand in a PL/SQL block. You can run a PL/SQL block on a request which is the id of a button for example.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------