setting variable property

Similar Questions

• Set variable TS of OpInterface

  I am customizing my operator Interface. Runtime (when), I have the need to read & write variables (total station).

  I have developed a VI in order to get and set variables using the "TS-Get/Set property value. The problem is that I can't get the correct context "sequences" to my VI. I tried to get the 'context of the sequence' in the insertion sequence of action in the sequence to save the 'context of the sequence' in a global LV, but it does not work.

  Is this the right approach? Are there different API which allow me to access the TS variables at run time?

  Thank you very much for your support.

  Thanks, you're right. I forgot to mention in my post that I also tried this solution. But I faced the same problem. How do the TS. Engine? Of the "ApplicationManager.GetEngine", that's what I was looking for.

  Thank you very much for your support.

• How to set the property iepe in labview signalexpress

  Hi, I have Labview 8.5 here connected to a USB-9234. We try to use the accelerometer that should be configured as IEPE, I tried like a post on this forum: http://forums.ni.com/ni/board/message?board.id=100&message.id=1976&query.id=143505#M1976

  but I can't find it in the Labview signalexpress or when I watched as the address in this post.

  Here's my search addess: C:\Program NIUninstaller Instruments\LabVIEW 8.5\vi.lib\DAQmx,is than at the time?

  Hi Lester14,

  To configure your as IEPE accelerometer, you'll want to do go in LabVIEW, rather than trying to navigate to it in C:\Program Files (you will need a property node that cannot be easily navigated to - the other post on the forum where this has been mentioned talks about using DAQmxBase that uses screws to set this property rather than a property node).  I think that all the information you need is in This KB.  Let me know if you need help!

• Can I set the property to any system of my application

  Hello, good afternoon.

  I have an application called has, can I set the property to any system to my app has? so that whenever I want to start or stop my application has from other applications, I need to check this property value sytem and inspiring that I need start or stop my application has.

  Note: if there is no option, suppose I put a 'Start' at my request other applications when trying to stop this application hasthe property system, I need to change this property value of the system up to request A leave of "start" to "stop". "" ""

  Please let me know clearly weather it is possible or not, if possible how can I do this?

  You can use RuntimeStrore and the status of the Application and define the Golbal events and other application B using the Golbal headphones you can stop the Application A.

• Trying to open my samsung cell phone program Kies 'cannot set owner property to a window that has not been demonstrated previuosly.

  Have used the Kies program to access samsung mobile and my PC today, I get this message when you try to connect to sync

  "Cannot set owner property to a window that has not been demonstrated previuosly"

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to uninstall and reinstall Kies program you and check if that helps.

  Hope this information is useful.

• Set-Variable help

  Set-Variable-name-value "NY" loc

  to connect-viserver NYvcenter001.xxx.xxx.com

  I tried

  to connect-viserver ($loc) vcenter001.xxx.xxx.com & all combinations possible... Please suggest

  Have you also tried like

  SE connect-VIServer ' $($loc) vcenter001.xxx.xxx.com.

• How to set the property to the parameter out

  Hi all
  I want to set a property to the parameter out in the application process.
  If the parameter has value, then I need the column with the value on a page.
  If the parameter out is not having a value, then I need to hide the columns on a page.
  
  I write the below code for this, but I did not get value and also the column appeared in the Page.
  
  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processRequest (pageContext, webBean);
  Am = (XxcustdtlsmainAMImpl) pageContext.getApplicationModule (webBean) XxcustdtlsmainAMImpl;
  
  If (PageContext.GetParameter ("PpcustID")! = null)
  {
  String vpID = pageContext.getParameter ("PpcustID");
  System.out.println ("cust in PR trxn id:" + vpID);
  am.passTocustlinetrxn (vpID);
  }
  If (pageContext.getParameter ("PCustomID")! = null)
  {
  If (PageContext.GetParameter ("PbtchID")! = null)
  {
  If (PageContext.GetParameter ("POrdNum")! = null)
  {
  If (PageContext.GetParameter ("PInvceNum")! = null)
  {
  String vcustoID = pageContext.getParameter ("PCustomID");
  String vOrdNums = pageContext.getParameter ("POrdNum");
  String vInvNum = pageContext.getParameter ("PInvceNum");
  System.out.println ("cust in drill PR id:" + vcustoID);
  am.srchCusttrxnlineupdatedtls (vcustoID);
  OAMessageStyledTextBean mInvBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("InvoiceNum");
  OAMessageStyledTextBean mTextBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("OrderNumber");
  
  if(mTextBean!=null)
  {
  mTextBean.setText (vOrdNums);
  } else
  {
  mTextBean.setRendered (Boolean.FALSE);
  }
  
  if(mInvBean!=null)
  {
  mInvBean.setText (vInvNum);
  } else {}
  mInvBean.setRendered (Boolean.FALSE);
  }
  }
  }
  }
  }
  }
  
  Thank you

  Hello

  Pls make the changes in public relations as given:

  If (pageContext.getParameter ("PCustomID")! = null)
  {
  If (PageContext.GetParameter ("PbtchID")! = null)
  {
  If (PageContext.GetParameter ("POrdNum")! = null)
  {
  If (PageContext.GetParameter ("PInvceNum")! = null)
  {
  String vcustoID = pageContext.getParameter ("PCustomID");
  String vOrdNums = pageContext.getParameter ("POrdNum");
  String vInvNum = pageContext.getParameter ("PInvceNum");

  am.srchCusttrxnlineupdatedtls (vcustoID);

  OAViewObject vo = (OAViewObject) am.findViewObject ("XxcustdrilldownVO1");
  Line row = vo.first ();
  System.out.println ("Hello I'm in spell112");
  row.setAttribute ("HideOrdNum", Boolean.TRUE);
  row.setAttribute ("HideInvNum", Boolean.TRUE);

  OAMessageStyledTextBean mInvBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("InvoiceNum");
  OAMessageStyledTextBean mTextBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("OrderNumber");

  if(mTextBean!=null)
  {
  System.out.println ("I'm in passivation");
  mTextBean.setValue (pageContext, vOrdNums);
  }
  if(mInvBean!=null)
  {
  mInvBean.setValue (pageContext, vInvNum);
  }

  Concerning
  Meher Irk

• Calling functions / set variables in loaded SWF

  You know how you can create a Movieclip object, add a function or a variable, and then call this function or change this variable to the SWF file that includes? I want to be able to do it, only with SWFs that are loaded at run time.
  
  My "main" SWF is just something the type of menu. The user clicks a button in my HAND. SWF and the HAND. SWF and then load the SWF associated with this button, using the AS 3.0 method Loader () - URLRequest () - addChild () that everyone always asks questions on prescribed.
  
  It works very well. But now I have a few custom and other objects (ie., not only the channels) in my HAND. SWF I want power sharing with the loaded SWF files. preferably, I'd use a function of the type of accessor (ie., LoadedSWF.GiveMeTheCoolObject (MyCoolObject)); Although at this point, I'm willing to hack the object itself (ie., LoadedSWF.CoolObject.CoolField = MyCoolObject.CoolField ;) if that's what it takes.
  
  I tried to call the functions and setting the fields, but the AS 3.0 compiler doesn't care for this kind of nonsense on its objects defined by the generically. Also note that, at runtime, a call to LoadedSWF.hasOwnObject ("GiveMeTheCoolObject") returns true.
  
  So my colleagues big brain, what is the magic?
  
  In advance, thank you for the help!
  Scott

  Kglad,

  Quote:
  Posted by: kglad
  the error message, seems, your function expects a member of the class MyCoolObject, correct?
  and MyCoolObject is not an instance of this class. so, you have to fix that. That is to say, create a member of this class, and use this class as a parameter of the function member.

  Heh, that's what the error message says all right. But the object IS actually an object of class MyCoolObject. I looked at this thing for hours and MyCoolObject IS an instance of this class. I tried different combinations of casting (including the cast on an object and passing that) but had no luck whatsoever.

  So I googled this particular runtime error message ("Error #1034: has no Type constraint: cannot convert '" ") and found a ton of links to other people with a similar problem. As a general rule, the problem was just as you say, someone passes a button as a string, that kinda thing. But a guy had a problem with an object that it has derived from the event class. Once the hours spent trying to make it work, he has tried to override clone() of the base class method and got it to work:

  http://www.assertTrue.com/articles/2006/10/14/custom-events-in-ActionScript-3-0

  As for my project, I took a long, hard look at the overall architecture of my project and decided it would be better if all the 'real work' is held in the HAND. SWF file. This approach would solve some other problems, and it makes sense in a mindset of "separating the display of data.

  If (and this is the interesting part) I changed the API for the LOADED. SWF to accept the pairs of strings (ie., LoadedSWF.AddToDisplay (String Name, String Data)) rather than accept MyCoolObj. Ran and Viola, now we work without any throw exceptions in. After this moment of glory, I created a couple of other APIs that comes from base classes (a type int, the other a type function) agreed and was happily on my way.

  On this basis, I understand while passing another base class objects (IE, the derived class) to load MovieClips via custom function API is... perhaps not so simple you'd expect. In the grand scheme of things well, not a big deal: as far as I'm concerned AS3 rocks.

  Kglad, thanks again for all the help: your comments on how this was the big push that I needed to get through the last barrier of this project.

  For those who read this topic for the ' how to call functions or set variables in a loaded SWF file?

  The short answer is cast to the SWF file that is loaded as a MovieClip content object and then call the function or change the variable:

  Load the SWF file (you saw this code a million times)
  var LoadedSWFObj:Loader = new Loader();
  var MyURL:URLRequest = new URLRequest("LoadThisSWF.SWF");
  LoadedSWFObj.load (MyURL);

  It is within your Event.COMPLETE Manager:

  Cast as a MovieClip object and work with it.
  var LoadedSWF:MovieClip = LoadedSWFObj.content as MovieClip;

  or another way to perform a cast:
  var LoadedSWF:MovieClip = MovieClip (LoadedSWFObj.content);

  Call yer function:
  LoadedSWF.CallMe ();

• Table 2D-strings in the "get/set item property.

  I am porting the code of veristand 2009-2010 and I noticed that the get/set vi item property does not the same. Specifically, I can't write or read 2D strings sent as variants. When I put the 2D table in a cluster, it works fine. Does anyone have information on this?

  JY

  Hi JY,.

  This problem was reported to R & D OR as a Corrective Action Request (CAR) 287960 for further investigation. Thanks for the comments!

• How to set the property node maximum xscale for several scale XY Chart

  Hello

  I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.

  What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.

  So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?

  Thank you for your help, any suggestions are appreciated!

  Hello

  After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.

  This solved my problem.

  I hope someone else can save themselves a few hours with this thread!

  Thank you

• How to set a property for all of a type of control in a cluster, by programming?

  Good afternoon everyone,

  I have a couple of clusters on my front, each consisting of 7 rings, 7 LEDs, numbers 7 and 7 channels... all the controls.

  There is a left and right cluster of these... but just focus on the left one to play with... specifically left 1 LED (labeled 1) programmed.

  As part of my code, I have allowed the user to select, LED lights... and I turn off so he can't just be deselected.

  I have a button on the screen which I will reset all LEDS that have been created and a few other controls too eventually.

  I know that in this case, I can create 14 knots of property for each individual LED and it Enable value.

  I'm just guessing there is sort of a more elegant way to do again... similar to set the values of massive for clusters using the name, defining values and writing in the cloister.

  I can't seem to find a way to do it with the properties on the cluster control as easily as you can do with values...

  Any suggestions?

  Thank you

  Cayenne

  
  

• Set the property record updateble / no updateble dynamically

  Dear friends,
  
  When I run the query in the form of oracle data is retrieved and displayed but I want to set the record the record recoveries property (updateble / no updateble) based on a value of text element in the file.
  
  How do we establish who and in what trigger.
  
  
  Thanx
  
  Manish Manyal

  Hello

  I think it's better trigger a Times-News-Record-Instance as after query fires only once, at the time of the query.

  François

• How to set the property on a orginOfOrder order REST

  Just started to work with the REST api and building on some harniess/poc test.
  
  What I have so far is the following:
  
  Result RestResult = RestComponentHelper.getPropertyValue ("/ atg/store/order/purchase/CartFormHandler", "order", null, mSession);
  String responseData = result.readInputStream ();
  
  This property returns back
  {'order': "order [type: default;]"} ID: o54180002; Status: INCOMPLETE. Transitional: false; profileId:24549804; ]"}
  
  
  I want to do is be able to set originOfOrder on the order.

  What you were doing in your code, it's that you have called the method CartFormHandler.getOrder () customer thru REST.

  If you want to set a value any order, you must write you still own method and call from your code.

  Peace
  Shaik

• set variable to use connect user/pwd@db

  set schema_cla = "CLA_T3".
  set schema_cla_pwd = ' phonied, 59.
  set schema_db = "OESH623D".
  
  connect schema_cla/schema_cla_pwd@schema_db
  
  
  
  I set user/pwd@db to be used to connect claue
  It gives me error
  SQL > connect schema_cla/schema_cla_pwd@schema_db
  ERROR:
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  
  WARNING: You are more connected to ORACLE.

  Enter sqlplus it are variable.
  change your connection to

  connect &schema_cla/&schema_cla_pwd@&schema_db
  

• To set the property Insert allowed dynamically

  I'm putting the Insert allowed to true in the region of the child: submarkets from if flag stuck on the market: parent area is set to 'Y' IE blocked flag on the parent is checked.
  
  This is the authorized isert property used on the area of the child:
  

  #{jhsUserRoles['ADMIN, BR'] && bindings.BlockingRuleBlockingRuleStatus.inputValue =='In Process' && bindings.BlockingRuleMarketBlockedFlag.inputValue =='Y'}

  But it behaves conversely. When the blocked flag is unchecked (I can see the display attribute is set to 'n'), I could see the symbol more on region submarket. When blocked market flag is checked ((je peux voir l'attribut d'affichage correspondant a la valeur "Y"), so I couldn't see the symbol more on the market.) It is happening wheather I use BlockingRuleMarketBlockedFlag.inputValue == 'Y' or BlockingRuleMarketBlockedFlag.inputValue == 'n'. Can anyone suggest?
  
  Thank you, Pradeep

  Pradeep,

  You can create a dummy output on your page with this expression text to see how it evaluates?

  In addition, create a text out dummy for the parts of the expression: #{bindings. BlockingRuleBlockingRuleStatus.inputValue} and #{bindings. BlockingRuleMarketBlockedFlag.inputValue}.

  Note that you may need to use .attributeValue instead of .inputValue if you are using a link list with these attributes.

  Steven Davelaar,
  JHeadstart team.