settings 'ini'
settings 'ini' how close the program that is currently running?
Hello
Setting.ini is a generic name that is used by thousands of programs to maintain the configuration.
Unless you explain in detail what you're talking about, there is no way even to guess a plausible answer.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
How can I fix sfc cannot repair the military record [I: 24 {12}] 'settings.ini '.
Original title: System repair
Hello
You can safely ignore the error messages in the CBS.log file. The SFC.exe command falsely reports the Settings.ini file information in the CBS.log file.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after you add gadgets to the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file
http://support.Microsoft.com/kb/947595Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Why my computer always say that when I turn it on: "settings.ini is being used by another process. Another close program, click Retry, or click Cancel out side bar.
Hi VeronicaSanchez,-Remember to make changes to your computer after that this problem started to happen?We will put the computer in a clean boot state to identify the application at the root of this problem.Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
My sidebar is not displayed in my administrator account. A pop-up Windows says 'settings.ini is being used by another process. Close other programs, and then click Retry. "However, no other program does run I know. I'm not able to access using Windows, the window is empty and shows that the site is under construction. Internet access seems to be hampered. This problem is not on my user account on the same computer, and I saw Windows Help on my user account. Also I tried to do a system restore and it was unsuccessful both times.
The profile of the user of this account may be damaged. You must create two new accounts administrator and use one to copy the data from your current account to the new account on the other.
http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile
I managed to fix this time by running the Fixit http://support.microsoft.com/kb/886549
Some of the registry keys that repairs this Fixit seemed to have been corrupted by a facility in need of elevation on behalf of administrator halfway through user account. It is interesting to try everything first to see if that fixes it. I always keep a few spare administrator accounts available now.
-
Original title: opening of the pop ups
I have Vista Home version. When I connect, I get the pop - ups following:
1.) _Windows sidebar Settings.ini. is used by another system.
Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.
3.) down the application did not start.
Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working". Sometimes I get started, and sometimes I can just 'X' out and I'm always on.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?I suggest you try the procedure below.
Step 1: Try to perform the clean boot in order to solve startup error messages.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
http://support.Microsoft.com/kb/936213Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Settings.ini. How can you check it?
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Also, when I connect to my Windows 7 PC and try to open the gadgets I get error indicating:
Settings.ini is being used by another process. Close other programs, and then click Retry, or click Cancel to exit.
My start > search function does not work either. However, the two functions, and gadgets and start > search, work under different user accounts.
Someone saw on how to solve this problem?
I don't know if it's related, but Thunderbird 3 has stopped working as well. UGH!
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I'm not able to install all of the gadgets since upgading House from Vista to Windows 7 Home Premium. A message titled "Desktop Gadgets" is displayed with the following message is displayed:
"Settings.ini is being used by another process. Close other programs, and then click Retry, or click Cancel to exit. »I don't know what the other program might be and have failed to find. Be without gadgets is not the end of the world, but they are of course very practical. I did the update even on my laptop and gadgets work perfectly.
Any help would be appreciated.
Solved!
If all else fails:
Go to-C:\Users\User Windows\AppData\Local\Microsoft\Windows Sidebar
Then delete the entire folder
Then go up one level from Dir and delete the sidebar directory
Solved.
-
Settings.ini error message
It seems that a lot of people have this problem. Seems to me that MS should go at the bottom of it and launches a fix. It's amazing to me that this problem persists on without a solution. Does anyone know if someone did something to solve the problem... I have read many solutions possible and none have worked.
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Make older programs in this version of Windows
http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspxWindows Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/details.aspxHOW to: Appropriating a file or folder in Windows XP (or Vista)
http://support.Microsoft.com/kb/308421/en-usError message: "access is denied" when you try to open NTFS file system folders
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; Q823306 #appliesto -
Settings.ini is being used by another process, how to find what causes the problem
I can't use my sidebar or windows update, that other programs work not only on the desktop administrator. have you tried restoring system and boot
Joan
Are you saying the problem occurs in a user profile and not another?
What happened when you tried the system restore? How long have you had the problem? You have a restore point from before the problem started?
It is always sensible in this situation to achieve a malware check
Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
http://www.Malwarebytes.org/Download and run SuperAntiSpyware (Free Edition)
http://www.SUPERAntiSpyware.com/download.htmlSome malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/ -
Cannot access the internet
To open a new account, you must be an administrator. Is your current account, an account administrator or you still have an active Admin account? Go to start / Control Panel / user accounts / manage other user accounts to check what's there. It that account you closed was the only administrator account, (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055. If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation. Create two accounts administrator with good passwords (secure and that you will remember).
Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account). Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered. Once this is done, connect using one of the new administrator accounts and you will once more control of your system (but you should always use a standard account for your work on a daily basis for security reasons).
I hope this helps.
Good luck!
P.S. You will still need to try some of the procedures described above to solve the problem of the internet and perhaps other issues. It depends on what happens when you start using your new account and if that solves the problem.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Sidebar does not work. have the .ini file, but when I try to open it States, "sidebar is going to end." Any help
Hello
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------------------------------------------------
Then proceed as follows:
How to restore the sidebar of Windows?
http://support.Microsoft.com/kb/963010If necessary to do it manually:
Logon as Admin - Start - type in the area of research-> COMMAND - find top - RIGHT CLIC on it-
RUN AS ADMINReplace C:\Program Files\Windows Sidebar by copying and pasting this command->
CD C:\Program Files\Windows Sidebar
Press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)Guest should be--> C:\Program Files\Windows Sidebar >
Then copy / paste each of them following their tour each come into
regsvr32-u sbdrop.dll
regsvr32-u wlsrvc.dll
regsvr32 atl.dll
regsvr32 sbdrop.dll
regsvr32 wlsrvc.dll
Sidebar should now work
Type in the search-> Sidebar box - find top - make a RIGHT CLIC top - RUN AS ADMIN
========================================================
Close the sidebar for that.
Something else for the settings.ini - run AutoRuns and look at the entries SideBar - Gadget
are there pointing to no longer like those temp files or uninstalled or
gadgets run do not? Those who will reflect the "yellow icons" on the left side and the
folder/files do not exist. If so right click on them and delete - Reboot.Autoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry and
locations where applications can configure Auto-start of the file settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello
A quick, I couldn't resolve literature or previous discussions.
I'm packing a .NET Application that uses the WebBrowser control that takes to turn its internet configurations from local IE settings.
I want to make sure that the packaged application uses the internal settings that I have configured.
Also, is there a way I can block certain ports to the use of the internal application. »
Thank you
-Dror
Regardless of the settings you provide inside the virtual environment will be used instead of the parameters the. This is true both for the registry keys and settings .ini (or other configuration files). If you want the package to use the settings on the local computer you must ensure that you do not go beyond providing conflicting parameters in the virtual environment and leave the package on the local computer (make sure you not entirely the party register of isolation or a folder).
ThinApp does not disable the TCP or UDP ports if that's what you are referring. If the application has a sort of GPO or similar settings to disable ports that will of course work if you ThinApp application.
-
I tried to install Thunderbird thunderbird - 24.4.0.tar.bz2 on Red Hat Linux Version. It's a direct download from the site Web of Thunderbird. The file thunderbird - 24.4.0.tar.bz2 seems to be missing the file be executed by Thunderbird.
first step:
chmod 777 thunderbird - 24.4.0.tar.bz2
second step:
tar - xjvf thunderbird - 24.4.0.tar.bz2
extracted files:
Thunderbird.
Thunderbird/Platform.ini
Thunderbird/searchplugins /.
Thunderbird/searchplugins/amazondotcom. XML
Thunderbird/searchplugins/AOL-Web-Search.Xml
Thunderbird/searchplugins/yahoo. XML
Thunderbird/searchplugins/Twitter.Xml
thunderbird/searchplugins/eBay.xml
Thunderbird/searchplugins/Bing.Xml
Thunderbird/searchplugins/wikipedia. XML
Thunderbird/components /.
Thunderbird/composants/libmozgnome.so
Thunderbird/Components/Components.manifest
Thunderbird/composants/libdbusservice.so
Thunderbird/defaults /.
values by default/Thunderbird/pref /.
Thunderbird/defaults/pref/Channel-prefs.js
by default, Thunderbird/messenger /.
thunderbird/defaults/messenger/mailViews.dat
Thunderbird/updater
Thunderbird/deleted-files
Thunderbird /libmozsqlite3.so
Thunderbird/OMNI.ja
Thunderbird/dictionaries /.
thunderbird/dictionaries/en-US.dic
thunderbird/dictionaries/en-US.aff
Thunderbird /libnss3.so
Thunderbird /libssl3.so
Thunderbird/icons /.
Thunderbird/Icons/Updater.png
Thunderbird /libprldap60.so
Thunderbird /run - mozilla.sh
Thunderbird/Throbber - small.gif
Thunderbird/mozilla-xremote-client
Thunderbird/libnssdbm3.chk
Thunderbird /libldif60.so
Thunderbird/plugin-container
Thunderbird /libfreebl3.so
Thunderbird /libnssutil3.so
Thunderbird/chrome /.
chrome/icons/Thunderbird /.
Thunderbird/chrome/icons/default /.
Thunderbird/chrome/Icons/default/default24.png
Thunderbird/chrome/Icons/default/default22.png
Thunderbird/chrome/Icons/default/default16.png
Thunderbird/chrome/Icons/default/default48.png
Thunderbird/chrome/Icons/default/default32.png
Thunderbird/chrome/Icons/default/default256.png
Thunderbird/chrome.manifest
Thunderbird/thunderbird-bin
Thunderbird /libldap60.so
Thunderbird/libfreebl3.chk
Thunderbird/dependentlibs. List
Thunderbird Extensions.
Thunderbird/extensions / {972ce4c6-7e08-4474-a285-3208198ce6fd}.
Thunderbird/Extensions/{972ce4c6-7e08-4474-A285-3208198ce6fd}/preview.PNG
Thunderbird/extensions / {972ce4c6-7e08-4474-A285-3208198ce6fd} / install. RDF
Thunderbird/Extensions/{972ce4c6-7e08-4474-A285-3208198ce6fd}/icon.PNG
Thunderbird /libnspr4.so
Thunderbird/blocklist. XML
Thunderbird /libnssckbi.so
Thunderbird /libplds4.so
Thunderbird/libsoftokn3.chk
Thunderbird/application.ini
Thunderbird/thunderbird
Thunderbird/Updater.ini
Thunderbird /libsoftokn3.so
Update-Thunderbird/settings.ini
Thunderbird /libxul.so
Thunderbird/isp.
ISP/Thunderbird/movemail. RDF
thunderbird/isp/Bogofilter.sfd
thunderbird/isp/SpamAssassin.sfd
thunderbird/isp/DSPAM.sfd
thunderbird/isp/POPFile.sfd
thunderbird/isp/SpamPal.sfd
Thunderbird/ISP/RSS. RDF
Thunderbird /libmozalloc.so
Thunderbird/crashreporter.ini
Thunderbird /libplc4.so
Thunderbird/precomplete
Thunderbird /libsmime3.so
Thunderbird /libnssdbm3.so
Thunderbird/crashreporterThunderbird CD
don't. / file thunderbird will run
It turns out that the download of the Mozilla - Thunderbird site is strictly for 32 bit. Someone was kind enough to give me the 64-bit x86_64 version. Thank you
Solved
-
How to get the file setup.exe to the next level?
Greetings!
I am building an application for distribution of my project.
When I finished, I have the following file system to copy on a CD:
-Folder of install main application
-Application.exe (and alias and ini)
-file data
-File volume
-bin folder
-license file
-folder supportfiles
-nidist.id
-setup.exe
-setup.ini.
I would get the setup.exe file to be on top (in the installation folder main application), so that a user can immediately find this file to start the installation.
Is there a way to achieve this?
I tried to do shortcuts, but the path of the shortcut is absolute, so it does not work on the CD.
Thanks for any help!
DCanQAlias wrote:
[...]-Folder of install main application
-Application.exe (and alias and ini)
-file data
-File volume
-bin folder
-license file
-folder supportfiles
-nidist.id
-setup.exe
-setup.ini.
[...]
This configuration file is typical, if you create the Setup program in the same directory as the executable (which would by default).
But please note that the Volume file is the full installer. So if you want to distribute the application, please use the Volume folder (and its contents) only!
The bin folder contains the files * .cab - who are the installation for the MSI (Microsoft Installer) files. These files contain the files you want to distribute, if your application, application settings (ini and aliases), as well as the data folder.
So you see if you copy the Installer Application folder any hand, introduce redundancies have occurred in these files...
hope this helps,
Norbert
Maybe you are looking for
-
Satellite C55 - I can not connect
Hey, I was wondering if anyone knows a solution, given that this problem is very annoying. I wake and boot up my laptop (Satellite C55) however it just never loads when I enter my password, it comes from the home and icon rotation forever, then event
-
Latest information of workflow
All, As you know is always moving from workflow. We work closely with all third party service providers to support our codecs wherever possible. Here's the last support from this moment
-
Support for Perkin Elmer 16PC FT - IR
LabVIEW support a spectrophotometer Perkin Elmer of FT - IR 16PC? I do not have the original software and need something to communicate with the instrument and make the %T and %R basic plots.
-
There is no screen display once I installed an AGP graphics card
I have an AMD semprom computer, 2 GHz, 512 MB of RAM. I installed a new (5500 GFX) AGP video card to replace my onboard video. But then, when I started my computer it didn't display, the monitor will slow as. I followed the instructions given to m
-
They seem to want to let me have online access to my PC to 'fix '. This unsolicited approach is likely to be authentic?