Sidebar will not come on, the States 'settings.ini."being used by something else, what? How do you turn it off?
Settings.ini. How can you check it?
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Internet Explorer will not come to the top. My router says I 54mpbs Exellent, but I can't go on the internet. Diagnose the problem button appears. When I run it, it says that my router is not working. I have wifi and my friend has the router and its connection is good. I also have a propellant that works great too.
Can you get far enough in IE to access the Tools Menu? If so try clicking Tools | Internet Options | Advanced and clicking the reset button.
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook -
I updated adobe and now windows vista will not come to the top!
I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all. I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.
Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X. Then try to restart normally.
-
Interface 1130ag WLAN AP will not come to the top?
Hi all
For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?
I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)
Can anyone suggest anything?
Thank you very much
Nathan.
UK.
Have you defined a SSID? If you have not the radio will not come to the top.
-
Since I set up Windows Vista, I can not close Windows Navigator. How do you turn it off?
Hi, BillMarrale,
Are you referring to the Windows Narrator?
Go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > untick the checkbox on Narrator byTurn > click Save...
-
Security Windows will not come to the top
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
It seems that your system has been infected:
Preform Malwarebyte s scanning:
http://www.Malwarebytes.org/ recommended
then the use of scan of preform
a-squared Emergency USB Stick files http://www.emsisoft.com/en/software/download/
After that, make sure that your system is free of viruses:
http://www.Avira.com/en/download/index.php
If you can not install anti virus Software, then try to scan online
http://housecall.trendmicro.com/UK/
and spyware:
http://www.systweak.com/AntiSpyware/
http://www.SurfRight.nl/en/downloads/ recommended
-
I have two monitors and Firefox will not come on the screen.
When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
Thanks for your help.
JerryYou get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?
If there is a tile (or a title of the window above the Firefox button in the task bar):
The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.
In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?
A possible cause for this is that the file that stores the positions and sizes of window is corrupt.
#1 method: If you can get a zoomed window:
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.
Leave this window open, switch back to Firefox and output, either:
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
#2 method: If you can not get a Firefox window for all:
Close Firefox by right clicking the icon in the taskbar > close all windows.
Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):
%APPDATA%\Mozilla\Firefox\Profiles
Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.
Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
-
Old laptop will not come to the top. To get the files and documents for the new laptop
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you
Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?
I do not know. The answer depends on what's wrong with the old.
Can I do this using a USB Flash drive?
# If you can not start the old laptop, you cannot transfer files from it
to the USB.If the problem with the old laptop isn't that hard drive has
has failed (and that's a big 'if'), you can pull the hard drive.
and get an external USB enclosure. Having done this, you can read
It is on the new laptop and copy files from it.Ken Blake (MS-MVP)
-
my door opens to a cd in. what's up?
Hello
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a paper clip that will release him and the reader to open.
Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclipI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Why can't I play the games on Yahoo Games? Game will not come to the top.
Whenever I try to play a game like dominoes or canasta on Yahoo games, I go so far as to choose a group to play then the connection never ends. I went through all the steps in the help of Yahoo, with no improvement. I uninstalled and reinstalled flash player and it did not help. I have connected to my system of work from my home machine, and I'm able to go right into. I can go in my former office on Vista with no problems. Both of my computers are Wi - Fi, but my office is at the same time.
Hi EdieKnight,
· What happen when you try to play the games?
· You receive an error message/code?
· What web browser do you use?
· You play games online?
I suggest you to update flash and java and check if it helps.
http://get.Adobe.com/flashplayer/
http://Java.com/en/download/index.jsp
For reference:
Troubleshooting for Yahoo! Games issues: ensuring that JavaScript is enabled and updated
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-07.html
Troubleshooting for problems of Yahoo! Games: Flash Player update
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-06.html
You also contact Yahoo support for more help and information.
http://help.Yahoo.com/l/us/Yahoo/helpcentral/
Reply back with more information.
-
Static L2L Tunnel - will not come to the top
Hi all
Currently have a very big problem with a site that I can't go there for the moment.
We have one HUB ASA5505 SEC + a few other ASA connected via VPN L2L. We have static L2L 1 active, 1 dynamic L2L Active, and I am currently trying to add a second static Tunnel L2L.
I checked that each WAN Interface can ping each other, and both devices have full internet connectivity. There is no double nat or being content filtering. I noticed that my Client remote access VPN Cisco will not properly connect through the ASA despite full internet connectivity, but when I connect directly to a modem, I was able to connect properly. So apparently the ISP isn't blocking IPSEC traffic as far as I KNOW.
Static2 uses currently a temporary license of TAC since our license is currently waiting for arrival, but a release of version see the watch all VPN/3des features are enabled.
Here are the configs:
ASA5505-HUB hostname
domain xxxxxxx.local
activate the password xxxxxxxxxxx
names of
name 192.168.9.50 xxxxxxxxx
name 192.168.9.51 xxxxxxxxx xxxxxxxxxx description
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address xxxxxxxxxxxxx 255.255.255.248
!
interface Vlan3
nameif dmz
security-level 50
IP 10.10.9.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd xxxxxxxxxxxx
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxxxxxxx
domain xxxxxxxxxxxx.local
permit same-security-traffic intra-interface
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list 101 extended allow icmp a whole
access-list standard split allow 192.168.0.0 255.255.0.0
permit to_static1 to access extended list ip 192.168.0.0 255.255.0.0 192.168.14.0 255.255.255.0
permit to_static2 to access extended list ip 192.168.0.0 255.255.0.0 192.168.16.0 255.255.255.0< this="" is="" the="" problem="">
RTP list extended access udp any permitted any 10000 20000 Beach
RTP list extended access permitted tcp everything any 10000 20000 Beach
pager lines 24
monitor debug logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
mask IP local RA-pool 192.168.99.1 - 192.168.99.126 255.255.255.128
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 75.146.188.94 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
set of 20 SYSTEM_DEFAULT_CRYPTO_MAP crypto dynamic-map transform-set ESP-3DES-SHA
card crypto outside_map 10 correspondence address to_static1
card crypto outside_map 10 peers set xxxxxxxxxx
outside_map crypto 10 card value transform-set ESP-3DES-SHA
card crypto outside_map 11 match address to_static2
card crypto outside_map 11 counterpart set xxxxxxxxxxxxx< problem="">
card crypto outside_map 11 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.9.101 - 192.168.9.199 inside
dhcpd dns 192.168.9.2 xxxxxxxxxxx interface inside
dhcpd xxxxxxxxx.local area inside interface
xxxxxxxx dhcpd option 66 ip inside interface
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
type of policy-card inspect sip default_sip
parameters
Journal of decline in the shares of Max-forwards-validation
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the rtsp
inspect the default_sip sip
!
global service-policy global_policy
Group xxxxx-RA internal policy
xxxxx-RA group policy attributes
Server DNS value 192.168.9.2 xxxxxxxxxxxxx
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split
xxxxxxxxx.local value by default-field
allow to NEM
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key *.
type tunnel-group xxxxx-RA remote access
Tunnel-Group global xxxxxx-RA-attributes
address-RA-pool
Group Policy - by default-xxxxx-RA
tunnel-group xxxxxx-ipsec-attributes
pre-shared-key *.
tunnel-group STATIC2_WANIP type ipsec-l2l< problem="">
IPSec-attributes tunnel-group STATIC2_WANIP
pre-shared-key *.
tunnel-group STATIC1_WANIP type ipsec-l2l
IPSec-attributes tunnel-group STATIC1_WANIP
pre-shared-key *.
context of prompt hostnameand...
ASA5505-STATIC2 host name
domain xxxxxxxx.local
activate the password XXXXXX
passwd xxxxxxxxxxx
names of
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
switchport access vlan 2
!
interface Ethernet0/4
switchport access vlan 2
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
switchport access vlan 2
!
interface Ethernet0/7
switchport trunk allowed vlan 1-2
switchport trunk vlan 1 native
switchport mode trunk
!
interface Vlan1
nameif dmz
security-level 50
IP 10.10.0.1 address 255.255.255.0
!
interface Vlan2
nameif inside
security-level 100
192.168.16.1 IP address 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
IP address xxxxxxxxxxx 255.255.254.0
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxx
domain xxxxxxxxxx.local
access extensive list ip 192.168.16.0 to_hq allow 255.255.255.0 192.168.0.0 255.
255.0.0
192.168.16.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.
255.0.0
pager lines 24
MTU 1500 dmz
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400Route outside 0.0.0.0 0.0.0.0 xxxxxxxxxxx
Global 1 interface (outside)
NAT (dmz) 1 0.0.0.0 0.0.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto cmap1 match 10 address to_hq
card crypto cmap1 10 peers set xxxxxxxxxxxxxx
cmap1 crypto 10 card value transform-set ESP-3DES-SHA
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 192.168.9.2 xxxxxxxxxxxx
!
dhcpd address dmz 10.10.0.100 - 10.10.0.199
dhcpd lease 10800 dmz interface
dhcpd enable dmz
!
dhcpd address 192.168.16.101 - 192.168.16.131 inside
lease interface 10800 dhcpd inside
dhcpd xxxxxxxxxx.local area inside interface
dhcpd ip interface 192.168.9.50 option 66 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group HUB_WANIP type ipsec-l2l
IPSec-attributes tunnel-group HUB_WANIP
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostnameAny help is appreciated
Hello
Seems to me that the ASA named STATIC2-ASA5505 lack some essential associated VPN configurations.
The encryption card is not attached to any interface
Configure this
cmap1 interface card crypto outside
The Crypto ISAKMP is not enabled on any interface
Configure this
crypto ISAKMP allow outside
Hope this helps
-Jouni
-
Specific color object will not come to the front.
I created a logo in Illustrator and saved as an AI. When placed in an inDesign document, one of the objects in the logo goes to the rear and refuses to come to the front. If I copy and paste the logo from Illustrator into Indesign is the same question. If I use a different color for the object in the logo and brings him to the then it works, but if I try to change the color to what I want in inDesign it automatically sends to the back and refuses to manifest. If I recreate the Logo in inDesign and use specific color, I need, it sends the object to the back. In addition, there, it's not transparent or blending modes applied to all the.
I'm puzzled!
Screenshots?
If the file is set to overprint?
-
Module development LightroomCC will not come to the top
LightroomCC load OK in the library module. However, when I click on an image and go to the module to develop the software stops working. I'm doing something wrong?
I also noticed that if I send a picture to Photoshop, it works. Also, if I send a picture to the Lightroom Slideshow, then click on develop it will go to the develop module, but only from slide show.
Wow, just got an email from Tanuj at Adobe. The solution is to go to the preferences, then Performance and uncheck the box ' processor graphics use.» And it worked. Thank you, Tanuj!
Peter
-
Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.
I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.
Hello
Maybe you didn t press F8 in the right way
You must press F8 immediately after the laptop has been powered!
Press several times to be sure 100%If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
The recovery disk is always important and useful if something goes wrong with the HARD drive!After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase
-
Vista will not open apps or to stop after being used for a short period (semi freezes)
When I start the computer, everything loads normally and works very well for a while, usually an hour or two. But after being in use or left alone, I'm more able to open applications, including Notepad, Microsoft Excel, Firefox or even windows Explorer Windows. In addition, the stop menu will not be displayed. I can open the start menu, but nothing else inside, so I have to do a cold reboot every time.
Excel is the only program that gave me any kind of error message, but it says there is not enough memory to run.
I am running vista Home premium 32-bit with 4 GB of RAM.
I also made sure to update all my drivers, most of my programs and even to reinstall service pack 2, but the problem persists.
You've done a repair system/upgrade and the problem persists? If this is the case, I sincerely doubt a clean install will do better (but he can and may be worth a try if it comes to that). I'm now tempted to think of material. We will check your hard drive and RAM:
To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html. If she failed the test, replace it. If she passes the test, then it's probably nothing wrong with it.
You can also test your RAM to http://www.memtest.org/. If it fails, test each piece individually to find those who are bad and replace. If it passes, the RAM is probably OK.
Is the computer that runs particularly hot - y at - it part of it which causes the pain from too much heat so that you have to pull your hand? The fan blows and he is blocked in any way (perhaps by a piece of paper or lint or something)? You may need to open the case to check for this (unless it's a laptop, then just check to see if the fan is working and you can feel air blowing from the vent.
After that, it of time for the computer repair technician to check the system hardware (NOT Geek Squad or one of these centers of department store, but a true professional) - but try following this section first to see if this is useful (and maybe try a pure install as a last resort). The problem (if it exists) can be any number of things that you can't check yourself without special equipment spare parts (the motherboard, processor, power supply,...). Check around to find someone reputable. Alternatively, you can return it for repair to the manufacturer (they have all the spare parts that may be required). Find out the costs and quality of options and guarantees with the repairs and then to make your best choice. Don't forget to backup your important data before send you it or bring it in - there is a pretty good chance that they will do something that will ask you to do a clean install even if it is probably not really necessary (but they are more interested in fixing the problem than the preservation of your data, programs and settings). If you have a version of Vista that is capable of a complelte image backup that would be the best choice – you could just restore when they return from the machine and you will be right back where you were.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
If they test OK, then let's see what you have running on your system at startup. Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download and install Autoruns (which is a FAR superior to Vista msconfig program) and see what to load at startup. I bet there are a lot of things, you really don't need but installed by the manufacturer when you installed programs (sometimes just so they will begin more quickly when / if requested). Some are inportant as Windows Defender and your software AV - but I bet that most of them aren't and they use valuable resources running in the background without valid reason. When I checked my own system I ended up remove about 90% of the items in the start menu - and the system showed an improvement notice in reactivity. Don't worry, you can always start almost all of the programs in the menu all programs (or you can add controls to the items or create new programs that you actually launched at startup with Autoruns.
The advice that Michael Murphy gave you already should have cleaned most of all what could be slowing down your system - and the repair/upgrade system took care of all the corruption in files on your system. I'm honestly not Kow nothing else to try (with the exception of the material option described above).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Why does sharing work at home?
I can't get the sharing of work at my job? I mean I have wifi here and everything, but it does simply not at all?
-
Page BrowZer is magnifying self how to fix?
When I'm surfing the web a few pages magnify themselves, I went to my computer to try to fix the settings but it does not help and I have to so manually set the temperature up to 100%, it is up 125% so I have some page in bulk. How can I fix it?
-
My account has been blocked, and I'm not recover is there someone I can phone?
I tried all suggestions online offered on how to recover a blocked account and nothing happens.
-
Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?
-
What is with Windows Live Mail
Live mail on Windows 7 Enterprise A week ago, Live mail began to take + 10 seconds to answer after hitting the answer to an e-mail.Before that, I had some problems with "empty messages", that I lived with. Tonight, it took more than 10 minutes to ans