Settings of brightness on Tecra 8200

Similar Questions

• Tecra 8200: If I use the moniter decrease brightness battery power

  I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?

  Hello

  If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.

  There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.

  Please test.

• Control the brightness of the LCD on Tecra 8200

  My Tecra 8200 PT820E, at some point, has been formatted less Tosh. control software. Book of hand says go to the Panel control/power economy and alter the screen brightness it. Which does not exist on my machine.

  The problem is when on battery, brightness level falls to a level that is unreadable. Is there another way to increase the brightness level?

  Thank you.

  You can do this very easily using FN + F7 to raise the brightness level.
  And I think that it is supposed to be the Toshiba Power Saver to look for this option.

  This small utility can manage the behavior of the energy saving modes, and there is an option how display is obscured.

• Tecra 8200: flicker of brightness of the screen on the use of the battery

  I have a Tecra 8200 running Windows 2000 Pro. The problem is with the brightness of the screen flashes intermittently, all a few minutes when it's on battery. The Toshiba power saver utility seems to work OK. his answer seems to depend on remaining battery life, that is to say less than 50% there is no difference between 'normal' and 'long life' with regard to the brightness of the screen.
  Superior to 50% there is no difference between 'normal' and 'high power '. There is no problem at all when running on the current.

  Recently, I changed the battery; the original was a PA3062U-1 bar, but the news is a PA3062U-1BAT. Can that be a problem?

  Hello

  The new battery is the right specification for this model of computer Tecra laptop and on I think that the battery cannot be responsible for this.

  If you try what Tom suggested it please let us know about the results.

• How to change the resolution on my Tecra 8200?

  I have a Tecra 8200 laptop, but without any of the original entry with this portable CD system.
  I installed Windows XP and you want to change the display resolution of 1400 x something to 1024 x 768, but after that, I have these black stripes, like a frame around the image.
  How can I put this in place? I can't find a keyboard shortcut!

  Second question: I have the problem that the screen is very dark ductless battery charger. I know I should use the power management standby, but I should install Toshiba other programs before installing the Power-Saver tool?

  I hope that there is someone who can help me and understand my English!

  Thank you

  Hello

  I found some info that Tecra 8200 comes with two different screens:
  1024 x 768 pixel TFT color display and
  Color TFT 1400 x 1050 pixels display.

  I assume you have the other. If you are using a resolution more low you can't wait for the perfect illustration and please use the native resolution. Please use the correct driver and you can find it on the Toshiba support page.

  Robin's right. Before you install Power saver utility install common modules first. Saving settings using, you will be able to adjust the brightness of the display to the maximum level.

• Tecra 8200 screen goes black when I use the battery

  When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

  Appreciate the help!
  Peter

  Hello

  On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

  You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

  Welcome them

• WiFi on Tecra 8200 after installing XP SP2

  I am running XP service pack 2 on a Tecra 8200.
  The problem is that the wireless card cannot detect any wireless router.
  I use a belkin G wireless router and it works, checked with another pc with a wireless card.

  However the toshiba wireless client shows no wireless network, the router or another computer.

  I have the antenna turn on and how to configure a wireless connection.

  I tried the old drivers and tried a number of drivers out of this site and others.

  But I had still not everything yet, does anyone else have this problem or a solution to this problem

  Hello

  If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

  There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

  Good bye

• Tecra 8200 - no finding wireless networks?

  Hi all, a n

  Symptoms are as follows,

  (1) Tecra 8200 with a detected Toshiba Wireless Mini Pci Card
  (2) a belkin 54 g wireless router
  (3) a belkin 54 g wireless bridge
  (4) a portable detached with a map of pcmi belkin 54 g

  to try to find wireless networks it does not find

  If I put the card of pcmi belkin in lappy everything works fine

  OS: winxp sp2

  all drivers are in the form of windows found installed n such that it is impossible to find any XP wlan readers n utils on the support site

  I see not all ideas

  any aid must be good help

  Hello

  First that I want to mention that this device is not supported for Windows XP Home edition and it is reason why you can't find driver Wireless Windows XP Home edition for this device. Please check the BIOS settings. You will find an option called device configuration. Switch to the installer of the OS.

  Do you use client or windows for configuring wireless settings?

• Questions Tecra 8200 (Extension power supply and driver display)

  I have a Tecra 8200 and works with Win XP. No I have a few problems:
  First of all, under Win 2000 and power only on batteries, you can select the speed of the CPU and the brightness of the LCD screen with a program called "Extension of power." Under Win XP doesn´t work "Extension of power."
  The next problem I regnosize ist the graphics card driver. Normally, if I press "Windows desktop on this monitor 'erweitern'" (sound of the German word, I Don t know what we call in English (my English is very bad ;))), superior this text I can click on a text called "Use this device as a primery monitor".) But I can´t click on it.
  I hope you can understand me and help with my questions.

  (If some people from Germany or German-speaking people here in this Forum are? You can send me an email ([email protected]) or message (ICQ number: 271944753)

  Hello

  On all laptop computers from Toshiba, Toshiba Power Saver is installed and this application is responsible for control the modules and CPU cooling.
  The brightness of the LCD screen, you can set with the additional application called FN keys.
  The FN + F6 or FN + F7 combination controls the brightness of the screen.
  The Extension of power unknown to me.

  I put t know what you want to do with the use of this device as the primary monitor, but I suppose you want to set the external monitor as the primary monitor. Am I wrong?
  As far as I know it of not possible to set the external monitor as the primary monitor.

  You can switch to the external display or you can use extended desktop on the second monitor but it of not possible to define as main screen.

• Cannot access TSetup on my Tecra 8200

  I replaced the first installation of Win98 to WinXP Pro on my Tecra 8200. Now I am unable to access the TSetup. I tried to reinstall the original win98 since the restore cd, but the CD will not run.

  I need to access the TSetup to activate the correct for S-video settings so that I can see my pictures stored on my TV.

  What can I do to access renewable TSetup?

  Hello, since a few days, I have a Tecra 8100.
  Try the following:
  Turn off the laptop
  Press ESC and switch it on

  After seeing the TOSHIBA sign, you can press ESC.

  Order to press F1

  The you if everything is fine in the BIOS without the Setup program that is also mentioned in my textbook, but is not on the computer.
  Best regards
  Hans-Walter
  DL9LBH

• Tecra 8200: Strange question if I try to install a DVD BURNER

  I have a Tecra 8200, Pentium III 750 mhz, 256 MB Ram, 60 GB hard drive.

  I buyed a new DVD player, especially a double layer RECORDER of DVD TOSHIBA SD-R6472 SLIMLINE 8 x DVD - RW for laptop in the CAR.

  I installed it on my totebook and this drive seems to be not recognized Windows XP (with service Pack 2).

  When I put on my laptop and start the boot Tecra 8200, the led of the DRIVE to continue but when starts to load windows xp this leads coming out and when the sistem of start of windows do not recognize ENGRAVER of DVD;

  Is there a method to recognize-DVD BURNER to windows, and I have to start looking for plug-and-play, after I have remove and replace the DVD burner.
  If I use this way to recognize the work of good DVD and Windows XP and everything works fine.

  The problem is that I do all this action to use this DVD burner.

  I try to install the other two-dvd burner but y at - it the same problem: windows don't recognize they must use my singolar procedure to use they; I try to update my bios to the latest version available and to update firmware of dvd writer but never.

  I ask a real help to those who can provide help for me.

  Thank you all!
  Grazie a tutti! :)

  CIAO

  Italy Dario

  Hello Dario

  Well, first of all, you must check the BIOS settings. As far as I know the configuration of the device must be set to the OS installer.
  Then it s advisable to reinstall the operating system. In this case, you must use the CD recovery or the original version of Microsoft Windows. All the necessary drivers, which you can download from the Toshiba site

  Good bye

• Where can I download drivers and manual for Tecra 8200

  Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)

  Take a look at this Toshiba European website:
  http://EU.computers.Toshiba-Europe.com

  You will find a support home page that contains links to the drivers and manuals.
  Then you must choose the * ARCHIVES * in download form!
  This unit is an oldie and so all the manuals and drivers have been moved to the archives.

  Good bye

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• Tecra 8200 Boot and install os!

  I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?

  Hey,.

  When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
  DVD PA3014E-1DVD player Kit
  PA3015U-1CDD 24 x CD-ROM Drive Kit II
  PA3068U - 1 CD 1 CD-R/RW Drive Kit
  PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive Kit

  These disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!

  It can also help to do a BIOS update unless the old one was not installed!

  Goodbye, TOK

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.