Setup does not open

Similar Questions

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• The iTunes Setup program does not open windows 10

  I recently bought a new computer that comes with windows 10 home installed on it. When you try to install the version of Itunes available on the itunes site, the program does not open, but instead appears with the message

  The same goes for the other files installed that have been suggested for windows 10 errors and I can't seem to find a solution. I even tried to contact Microsoft technical support team however they were no help either.

  Help me please!

  I have also the same problem and same message. I have a new Lenovo laptop with windows 10. I sent support from Lenovo. I hope they can help.

  

• Firefox does not open on my computer

  For some time last night and today (11/18) Firefox does not open when I click on the quick link to my office. I tried to add another profile by clicking on start/run/firefox.exe, but it does not work yet. What would be the next step?

  Error messages appear when you try to open Firefox?
  
  In the Task Manager, is the firefox.exe process running?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  The report please come back shortly.

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Properties assistant DAQ does not open

  We use version 8.0.1 LV with daqmx version 8.7.1. Win Xp with a PCI-6025E, SCB-100 card is attached. I can measure the thermistor in the SCB-100 in the measurement and automation for the hardware seems to work OK. The problem is to use Daqmx in LV I am following the tutorial at http://zone.ni.com/devzone/cda/tut/p/id/2744 . When I drop the Daq Assistant on the block on that diagram it does not open the property page for me to configure an analog input, double-click don't work, simple click and selecting Properties does nothing. In the measurement and automation, I can create a task and he launch the daq - mx box and setup of measurement with the PCI-6025E. Probably a setting issue somewhere, any ideas?

  See this discussion and this one.

  Hope this helps

• GTA san andreas does not open with windows 7! How to silve this if you please help me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: gta san andreas does not open with windows 7! How to silve this if you please help me

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Review the information from the Windows 7 Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Grand%20theft%20auto

  He says that version 2 is not compatible.

  If Aero is the problem, disable it before installing the game and then turn back on.
  I would say as you right-click on Setup and select "Run as Administrator".

  I hope this helps.

  Marilyn

• recovery system does not open

  When I click on the recovery of the system, it does not open.  I am running windows xp professional 2002.  I tried to update, but it freezes when trying to install the program active x.  I tried to run it, rundll32.exe advpack.dll, LaunchINFSection % Windir%\Inf\sr.inf too, but I don't have the disk to install xp service Pack 3.  I think it was a downloaded update so no disc.  If at this point, there is no way for me to do a restore of the system if necessary and no way to get the updates even if they are set to auto.  I also scanned for a virus that found nothing.

  Hear you the system restore will not launch at all or it does not start, and you see just a blank white screen where the calendar should it be?

  It is not difficult to reinstall the system restore (not reinstalled XP - only the part of SR), but to see how this other idea it works.   Reinstall SR will destroy all your old Restore Points and leave you with an another fee.

  It is easy to reinstall the system restore.  Here's how:

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.

  If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to c:\windows\inf, and right click on the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall SR because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where it is, let waiting for installation and click Start, search, then search for the requested file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  If you still can't find the files, let us know what is the file you need and someone can download on his SkyDrive and you can download it.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  If asked:

  xrstrui.exe

  Point installation c:\windows\system32\restore

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  Now is the right time to test your system restore process, from one end to the other.

  The day that you think you have need of system restore is not the day, namely that it does not.

  Reboot your system and without anything running (no browser, Outlook, etc. - just the basics), manually create a new Restore Point, restart your system and see if you are able to restore your system to the Restore Point, you just do.

• Photosmart e-all-in-one B110a: HP Solution Center does not open

  This problem began in late December 2015.  HP Solution Center worked fine until then.

  Now the printer works well, but the HP Solution Center does not open, so can not scan to computer or check ink levels.  Tried to uninstall the KB3132372 update [as suggested in this forum] and then everything works.

  However, the update (KB3132372) maintains the re-setup and hit the Centre of HP solutions again.

  Is there something wrong with the KB update that disrupts the HP driver?

  Is that what I can do through a permanent solution? (other than uninstalling KB3132372 immediately prior to scanning)

  Thank you.  Problem solved.  I admit I was a little uncomfortable uninstall security updates - but everything is OK now.

• Photo smart media does not open

  I used this software a lot. The last time I downloaded images and went to change, and it does not open. I tried other programs in the smart media and they all work very well. It's just the photo program. I use a PAvilion dm4-1165DX laptop any help would be greatly appreciated

  RTK

  Hello

  Download the installer for HP MediaSmart Photo at the link below and save it to your desktop.

  HP MediaSmart Photo

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" - this should first uninstall your current version of the software before installing the new version.  When this is complete, restart the laptop.

  Kind regards

  DP - K

• HP psc 1315v software does not open

  OS is xp 3, computer dell 510.  Could not update installed software then followed to uninstall information and do a reinstall.  When I tried the cd version 4.2.0 I used before (a few times) it does not open regardless of the method that I use. I have the software loaded HP 1310 series in order to have a working printer but I wish I had the complete package (ie the scanner etc.) from the cd.  I know that this cd works because I can put it in another xp system 3 and it will start to install on this system, it does nothing.  I have uninstalled and installed the software several times over the years and had no problems before.  I wonder if there is something HP on the system that may be stopping the cd to open up. I can open the cd, but when I click on setup it flashes for tw seconds, but does not open. Shut down my antivirus and windows firewall, although she does not open.  Would like to do a complete cleaning of the remains of HP and start again because I find a lot of elements HP when I do a search.  Had to wipe the OS several weeks ago and reinstall everything, including the printer and there is no problem until I tried to see if there were updates HP.

  DGAR

  Hello

  I see that you have a problem with the installation. It seems you have a problem with the filter upper and lower in your registry, if the CD works on another PC. Which basically means your CD/DVD drive can be properly reading the disc. I suggest do a L3 uninstall and then the registry cleaning software.

  1 cleaning disc on your computer - you can skip this step if you want to

  2 download and run the software and drivers below.

• Control Panel; Does not open programs and features.

  Help! Programs and features in Control Panel does not open. It's as if the file is no longer there.

  Hello

  I had the same problem, caused by an update of thugs. I had to do a repair installation to fix the problem. For this,.

  1. Start your Windows computer.
  2. Insert your Windows system DVD into the DVD drive.
  3. Once there either using Windows Explorer or AutoPlay navigate Windows system disc and double-click on the file called "Setup.exe".
  4. Let Windows boot phase review and collection, when that is complete, Windows continues to install Windows 7 on your existing installation of Windows 7. If there is a problem, Windows will give you the opportunity to continue or back out (I would recommend back out).
  5. Once installation is complete, you will need to then activation key, then go to Windows Update and precede to download and install all the WU you miss.

  That's all. It takes more time to make that a full install as Windows must work around your installed files. But it is the method that worked for me.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Windows does not work all installs does not open IE

  Suddenly Windows eight iE does not open site default Web or no desire any other work of the tab while that which hangs IE works only in mode of protection of personal information.  When I try to download Google Chrome or FireFox, in that none of them install regardless if I try to run it from the web page or save a standalone setup file eregardless to know if I run it as an administrator or not.  In addition, Norton will not download an installation of Norton Internet Security available in my subscription but insists on watching expired evaluation edition.

  Each installation attempt results window saying that Windows SmartScreen is not available right now.  Race in any case does nothing and close the window of IE.

  Finally, download Windows updates but will not be installed.  This is the case for a few weeks.

  Thank you!

  Have you tried a system restore to a date before these problems started and see if it helps?

  In addition, to start the computer in Mode safe mode with networking and then see if you can run scanning using the Power Eraser tool?

  Thank you!

  Vineeth

  Norton support

• Lightroom 6.0 does not open

  Hello, I bought Lightroom 6.0 in 2015 Dec (not membership of the creative cloud - just the application). I have used it very well, but do not have the last couple months. When I go to open the application, the wheel just keeps spinning with Lightroom front page showing version 6.0. Nothing happens and the application does not in fact. I thought to uninstall but don't know if I can re - stall it now. I know there have been a few updates to the 6.0 version, but because the application does not open, and I can't actually click on anything on the top tool bar of Lightroom, I don't know what to do. Help, please! Thank you.

  Hi desiraer,

  Please update your version of Lightroom for the last update and check if that helps.

  Download Mac Update: http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeLightroom-6.0/6.6.1/setup.dmg

  Windows: http://prodesigntools.com/swupdl/updates/oobe/aam20/win/AdobeLightroom-6.0/6.6.1/setup.zip

  Let us know if that helps.

  Kind regards

  Mohit