Several acceleration curves require the splitting motion?

Similar Questions

• Apply the same motion tween in several layers

  My character has many layers as arm, leg, eyes and I applied several tween in each layers, now I want to apply the same motion tween in all these layers, is there a way to do it?

  • Download Dave Logan - Flash Extensions NewerAnimClip and install it.
  • Select all layers that contain pieces of your character.
  • Run the command
  • Make sure that what he has created is set to be a graphic symbol
  • Under a loop, set your symbol 'Play once'.
  • Apply the motion tween your new graphic symbol.

• Several curves on the graph XY

  Hello

  How to plot multiple curves on the graph XY.

  Here is a solution for the 2 curves, but if the number of curves is important (e.g. 10) this method becomes boring.

  A detail more - all curves share the same X.

  Thank you

  

  Perhaps this will clarify what we say.

  

• How are we supposed to work with the new motion tweens if there is no editor of motion more?

  How are we supposed to work with the new motion tweens if there is no editor of motion more? Without query editor, we can see what kind of key frames are defined and we cannot set acceleration anywhere. Adobe go us back and use the old motion tweens does want now?

  Hi all

  Flash Pro CC 2014 (v 14.0.0.110) is now available for download through the creative application of cloud.

  We have included a whole new motion editor and several other new features with this release of Flash Pro. The new query editor is completely redesigned, intuitive and easy to use while retaining the basic features and backward compatibility with Flash CS6

  To call the query editor, just double-click on your motion tweens on the timeline (or right click and select "Refine the Motion") and the motion Editor opens in the context of the scenario itself. Double click again to collapse once you have made your adjustments.

  Complete list of the new features of Flash Pro CC 2014 is available at these links:

  Overview: https://www.adobe.com/in/products/flash.html

  What's new: https://helpx.adobe.com/flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Videos: https://helpx.adobe.com/in/flash.html

  Thank you

  Mabrouk

• Web development Toolbox prevents me from using the letter upercase, special characters and all that requires the use of the SHIFT key. Help.

  whenever I press the SHIFT key, the web development Toolbox opens. I am unable to use the letter upercase, special characters and everything that requires the SHIFT key. It's really annoying me... i can't even use an exclamation mark111111

  The sounds you have a sticky key which is in the pressed state.

  Do you mean the box tools that should open via Ctrl + Shift + K or open more to the Toolbox that is displayed via Ctrl + F2?

  Try to press the keys involved several times, see the Web Developer menu for the shortcut keys.

  Have you tried to close and restart Firefox or restart the computer?

• I read the messages on the screen split prooblem I have. I read the posts and I do not have the separator module of fox. Is there another way I can eliminate the split screen?

  I have firefox installed on both computers. The office displays not the split screen, but the laptop don't. I checked the posts and I have not the separator module of fox but still get the split screen when I click on a second site.

  Firefox has no built-in opportunity to split the screen. There are several add-ons that can split the screen to solve this to know what originally, using the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  Another possibility is that you have a few set bookmarks to open in the sidebar. If this only happens for a few bookmarks, right-click on the bookmark, and then select Properties. Make sure that the "Load this bookmark in the sidebar" option is not selected.

• Hi, I have a sport IWatch found that domestic activity (usually running on treadmill) there is a huge different iWatch see the short distance (approximately 23%) then the treadmill Distance (I used several treadmills). Calibrate the iwatch outside.  any o

  Hello

  I have a sport IWatch found that domestic activity (usually running on treadmill) there is a huge different iWatch see the short distance (approximately 23%) then the treadmill Distance (I used several treadmills). Calibrate the iwatch outside.

  no possibility to calibrate domestic? or solution of New York.

  Thank you

  Avner

  Hi Avner

  Currently, there is no way to calibrate Apple Watch on a treadmill.

  Calibration teaches your watch how your arm movements relate to your length of stride at different speeds when walking you and/or running. It does this by comparing the accelerometer data with GPS (location services) data from your iPhone. To optimize the performance of the application of the workout, when using the treadmill, allow your arms swinging naturally.

  It can help restore your calibration data and start over:

  On your iPhone, in the application of the watch, go to: My Watch (tab) > privacy > Motion & Fitness > tap reset Calibration data.

  To calibrate again, follow the instructions in the article to support below, including:

  • Records open-air market training and/or run in the open air with the application of the workout on your watch.
  • This for 20 minutes at each speed to during which normally walk you or run.
  • While doing so, take your iPhone with you, with location on Services.
  • Allow your arms swinging naturally during training.

  Estimates of activity also dependent on your personal information. To verify that it was entered correctly and update over time:

  -On your iPhone, in the application of Eve, go to: Watch My > health > edit (top-right).

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• The USRP CSD requires the LabVIEW Communications?

  I recently installed LabVIEW 2013 on my machine, as well as a whole bunch of toolboxes:

  LabVIEW English 2013
  VI Package Manager
  Module LabVIEW Control Design and Simulation 2013
  2013 LabVIEW Datalogging and Supervisory Control Module
  2013 LabVIEW MathScript RT Module
  NI LabVIEW 2013 LEGO (R) MINDSTORMS (R) NXT Module (in English)
  Module OR Vision Development 2013
  Module LabVIEW FPGA of 2013 (English)
  Xilinx toolchain 14.4
  Module time real LabVIEW 2013 (English)
  2013 LabVIEW Touch Panel module
  2013 LabVIEW Robotics module
  Software OR SignalExpress 2013
  LabVIEW Sound and Vibration Measurement Suite 2013
  Module LabVIEW Statechart of the 2013
  LabVIEW 2013 for myRIO Module
  Toolkit OR run real time Trace 2013
  2013 LabVIEW System Identification Toolkit
  LabVIEW Toolkit 2013 Digital Filter Design
  4.3.4 for LabVIEW Modulation Toolkit
  2013 LabVIEW VI Analyzer Toolkit
  2013 LabVIEW Database Connectivity Toolkit
  2013 LabVIEW Report Generation Toolkit for Microsoft Office
  LabVIEW Spectral Measurements Toolkit 2.6.4
  2013 LabVIEW Advanced signal processing Toolkit
  LabVIEW 2013 PID and Fuzzy Logic Toolkit
  Kit filter LabVIEW Adaptive, 2013
  Toolkit LabVIEW DataFinder of the 2013
  2013 LabVIEW Desktop Execution Trace Toolkit
  LabVIEW 2013 Multicore analysis and matrices hollow Toolkit
  LabVIEW 2013 power electric Suite
  Toolkit LabVIEW 2013 GPU analysis
  Biomedical Toolkit LabVIEW 2013
  Module LabVIEW 2013 OR SoftMotion
  NEITHER Motion Assistant 2013
  NEITHER Vision Builder for Automated Inspection 2012 SP1
  OR DIAdem Professional 2012 SP1 (English)
  LabWindows/CVI 2013 development system
  Module time real LabWindows/CVI 2013
  LabWindows/CVI Spectral Measurements Toolkit 2.6.4
  Spectral measures of LabWindows/CVI DURATION 2.6.4
  LabWindows/CVI SQL Toolkit 2.2
  Toolkit for processing Signal of LabWindows/CVI 7.0.2
  LabWindows/CVI PID Control Toolkit 2.1
  Execution of LabWindows/CVI Profiler 1.0
  Measurement Studio Enterprise Edition for Visual Studio 2012 2013
  General safety NI Patch 2nd quarter of 2013
  NEITHER TestStand 2013
  NEITHER ELVISmx 4.5
  NOR-DAQmx 9.7.5
  Xilinx 10.1 Compilation tools (requires the build tools additional Xilinx DVD)
  Device drivers or - February 2013

  I tried to follow this tutorial with the USRP 2932, coming soon, but I found out later that I have seem to have none of the LabVIEW Communications. No not those who prevent me from using the USRP radio? If not, then is there any restrictions on what I can do with the radio without communication?

  Hi BreadLB,

  The link to the tutorial you posted is based on LabVIEW Communications System Design Suite, a new software environment designed to accelerate the prototyping of the algorithm and stable air.  It is a completely separate and independent of LabVIEW environment.  See my post here for more details.  You can also download a free 30 day trial copy here.  Your hardware is supported with LabVIEW and LabVIEW Communications.

  The 2932 NOR is a network based USRP, and there a small on-board FPGA.  For this reason, the FPGA on that specific product is not a target of LabVIEW FPGA.  The NI 294 x / 5 x family has a large Kintex 7 FPGA and can be programmed using LabVIEW FPGA and LabVIEW Communications, as in the tutorial you posted.  The 2932 OR can be used with your host PC and LabVIEW for a variety of applications.  Unfortunately the tutorial that you have linked to your post requires the NI 294 x / 5 x hardware and Communications of LabVIEW.  If you have questions about a specific application for your 2932, please post more details and we would be happy to help you.

• Cannot install streets & trips 2011, error: Microsoft streets & trips 2011 requires the installation of Microsoft Visual C++ 2010 Redistributable

  Original title: streets & trips with GPS Locator 2011 install problem

  I try to install Microsoft streets & trips with GPS DVD positioner 2011 and it fails at the beginning of the installation.  My environment is a workbook of Elite HP 8560w running teacher of Win 7 and Microsoft Office 2010 Professional (8 GB memory, 500 GB disk space).

  I want to emphasize that I will not be plugging the GPS stick on a USB port until the installation process or the installed software requires it.  The installation begins with the display:

  "Microsoft streets & trips 2011 requires the installation of the Microsoft Visual C++ 2010 redistributable. To install the component now, click OK. If you want to stop the installation and exit the Setup program, click Cancel. »

  I clicked on OK to proceed with the installation. Another message was displayed:

  "Please wait while the Microsoft Visual C++ 2010 redistributable is installed."

  After a fairly short period of time, a final message was posted:

  "One of the prerequisite components failed to install. The installation program will now exist. »

  I check that my list of installed programs in programs and features, and Microsoft Visual C++ 2010 is already installed, listed as:

  Microsoft Visual C++ 2010 x 64 Redistributable - Version 10.0.40219
  Microsoft Visual C++ 2010 x 86 Redistributable - Version 10.0.40219

  I tried to start the installation several times but still, he fails and ends at the same point.

  What must I do to properly install Microsoft streets & trips with GPS Locator 2011?

  William Allen

  I thank all participants for their contributions on my problem captioned.

  As I mentioned in one of my previous answers for myself, for me, this issue is now closed.  Microsoft support has accepted my MS Streets & Trips w / GPS for a full refund.  At least, support staff, that I spoke acknowledged that ST2011 was known to be incompatible with W7P SP1 and they offered a full refund.

  A number of responses I received offered possible solutions that I had tried and has said on this subject in previous updates (for example, to run the installation of the data .msi on the installation CD).  Then I still had possession of the ST2011 software, I don't was not informed of Microsoft resetting tool mentioned by Mike L. Robbins, so I can't say if that than me by my installation problems.  Be it, everything is sent to Microsoft.

  I can only hope that if Microsoft releases streets & trips 2012 which does not inherit problems, I lived.  In my view, this thread can be closed now.  Thanks to you all.

  Certainly continue to reply to this topic, if others could benefit from your proposed solutions to ST2011 installed.

• Several deployments of a Standalone WLS motion

  Hey guys,.

  We use Jdev version 11.1.1.7 (11g Release 1).

  I'm working on a project with another colleague of mine.  The nature of the project requires us to do all our tests through a standalone WLS who has been implemented.

  We run in the test questions as we walk on the toes of the other when redeploy us to test our code.  We tried several versions running on the server, but we run into a few problems because of the structure of our applications.

  The configuration is the following:

  We have only one application of the ADF who manages the newspaper in and maintenance of account screens.

  This application makes calls remote taskflow to another application that contains several projects and taskflows in each project.

  Our application uses also SOA and BPM processes and human task runs as well as MDS.

  We were able to deploy multiple versions of all applications separately, but when the newspaper in the application makes a call to demand access to a taskflow, is not always call the correct deployed application.

  We gave to each instance of each application a unique name (for example, Login_1, Login_2, Forms_1, Forms_2, SOA_1, SOA_2).

  Is it possible to install?  Thanks for reading.

  Run multiple instances of WLS.

  We tried several versions running on the server, but we run into a few problems because of the structure of our applications.

  Not several versions but multiple instances are needed. Create a separate WLS domain for each user.

• JDeveloper 12 c: cannot display the split in dvt:projectGantt task

  Hello

  I'm working on graphic dvt:projectGantt with sub tasks and divide the tasks using Jdeveloper 12 c (12.1.2.0.0).

  Initially the sub tasks were not displayed. Using

  ADF 12 c bug & amp; #8211; Unable to display Gantt chart with subviews correctly in ADF 12 c | kBLOG

  I found the solution to display under tasks.

  But I couldn't split in the graphic tasks. I need to change any property for split tasks?

  Thank you in advance,

  Usha

  dvohra21,

  The link you mentioned above is just saying that how to create Gantt charts (project, use of resources and planning). In my case, split the tasks and the dependent tasks displayed in the graph. But when you add under tasks, the split and the dependent tasks were not displayed.

  I solved this problem by using view separate query object based on the subtasks. Before this fix, I used object unique view to display the tasks and subtasks in project Gantt chart.

  I am facing another issue. I printed the lap time on the conduct of split operation in project gantt chart. Split a task into two using split of the toolbar image, it prints the mean date of this task. But on clicking right button of the mouse and select split option, it prints the date that I did a right click on the task. But I do not get the precise date several times.

  Please give some ideas to solve this problem.

  Thank you in advance,

  Usha

• Several Documents (invoice) by the generation of reports

  Hello and help
  
  I have a question during the development with bi publisher.
  
  I want to generate a report with several bills, as from the notification should be once a month.
  I have a list with bills to print and I will mark some invoices for printing or together.
  
  So, I have several clients who will get an invoive me.
  
  How to implement this "as a best practice" in bi publisher?
  
  How we prevent bi publisher generates the footer, when more than one page has been generated by the customer's Bill in the whole printing process?
  
  The display of page numbers in the model of footer in the whole printing process?
  
  How the xml data must be?
  My suggestion would be to generate a table that has all of the information generated by a pl/sql procedure in the database
  but it is necessary?
  
  Thanks for the suggestions!
  
  Concerning
  Frank

  Hi frank,.

  You can get different page for a different invoice numbers in a single report using .
  To avoid the footer if your Bill exceeds the first page, you can use . What ever you the code after this will be considered as a footer for this given the transaction on the last page. To the page number, you can use MS word page number. By using for-each@section, you can reset the page numbers for each invoice.
  About the logic of how the XML should be, it depends on your condition.

  I hope this helps you! I am also faced with a similar requirement :)

  Thank you!!

• Extract Pages... and the Split... do not do what I expect

  I have a document created in Illustrator (CS4), which has several work plans. I want that it split into several documents, Board of Directors an art - > a document with only this work. When I use the extract PAges... and the Split... orders to generate multiple documents, I get the multiple docs (same number of documents created as pages in the original document).

  The only thing is that every doc has all work plans and all works of art like the original doc. I couldn't understand all the works of art being there but all the plans of work also? What is going on?

  Appreciate the pointers on this.

  Writing a JSX to run in artificial intelligence, but hurt so far. Wire for solution started here: AS) export PDFs single page of work multi-plans

  No worries.  Just try to get a handle on the issue.  I think that we are talking in different worlds.  I wrote to the Acrobat and PDF software for 10 years, printing, processing documents, forms, etc. name you it.  I have never worked with Illustrator, never heard of work plans and never seen references that you use.

  see you soon,

• I have several new emails in the Inbox, but I'm unable to view or even see them?

  I have several new emails in the Inbox, but I'm unable to view or even see them?

  Hey CRB123,

  Thank you for being a part of the communities of Apple Support.

  If I understand your message, you see a badge that you have unread e-mails in your Inbox, but they are not appearing.  An easy way to separate the emails read from the unread macOS that Sierra is to click the button to filter in the list of messages, or sort by unread:
  

  • Activate the filters: Click the filter button at the top of the list of messages, click unread to display the list of available filters, and then select one or more filters. A check mark indicates a filter is active.

    

    If you use more than one email account in Mail, you can filter the Inbox into account - for example, only show emails from your iCloud account.

  • Disable an active filter: Click on the filter.

  • Disable all filters: Click the filter button .

    Mail remembers your filters and automatically applied the next time that you click the filter button to activate the filters.

  You can also sort the list of messages - just click on "sort by" at the top of the list of messages, then select an attribute, such as and a sort order. In a typical configuration, click on a column header.

  Mail for Mac: filter the list of messages in Mail

  If no unread messages, then I would like to confirm if you have emails unread looking webmail for your email account. If you see the unread messages in webmail, go back to the mail app, and then rebuild your Inbox:
  

  You may have to re-create a mailbox to update the list of the messages it contains. For example, if messages seem to be missing or garbled, or if you don't find any relevant messages when you search by using the entire Message search option.

  • Select a mailbox in the Mail sidebar, then choose BALL > rebuild.

  When you rebuild the mailbox for accountIMAP or Exchange messages and attachments stored on your computer are discarded and then downloaded again from the mail server to your Mac. Your mailbox is empty until the download is complete.

  Mail for Mac: rebuild the mailboxes

  Take care.

• After installation, bookmarks import/restore will require the password from the previous version

  I tried to set the master password yet appeared that submit or accept was grey and there was no focus confirmation. No PC to use for more than a week (out of the city for the funeral) was subsequently returned to find now need a master and had no idea that I had used the day I tried to settle this. I've saved my favorites and now wonder if I install a new version if those import requires the password that I don't know.

  I suggest that the master password must confirm that it has been set. I had 'cancelled' on this screen so assumed, no password has been in place. Hard lesson to find out if I have to reset and lose all the passwords.

  First of all, ALWAYS save your passwords safe, just for this reason.
  As for the master, this effects only password manager. The other
  managers should not be carried out.

  https://support.Mozilla.org/en-us/KB/use-master-password-protect-stored-logins
  Use a master password to protect stored passwords and logins
  The definition of a master password in Firefox is useful if your share your computer with others. We'll explain how it works.

  https://support.Mozilla.org/en-us/KB/reset-your-master-password-if-you-forgot-it
  Reset your master password, if you forgot
  You can reset your master password in Firefox, if you forgot, however, this will remove all of your saved usernames and passwords. Learn how do.