several applications of internet Explorer in the Task Manager

Similar Questions

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I farm Metro application other than by using the Task Manager?

  How can I farm Metro application other than by using the Task Manager? If there is no way, please add a close button, Microsoft.

  Hello

  ·          What version of the operating system is running on your computer?

  Alternatively, press ALT + F4 to close the application.

• What is 'Quickactionbox' appliction? He is constantly provide in the list of applications that are running in the Task Manager on several occasions.

  

  Here you can see the problem. What is this thing?

  Hi Benjamin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem some application named QuickActionBox is running and showing in the Task Manager.

  If you think that this application is not known to you and you think that's not important, then you can uninstall it in the list of programs. But before you uninstall this application, I recommend to create a system restore point and try to uninstall the application so that if this application is important, then you can come back to this point again.

  To create restore point, you can see the article mentioned below.

  A restore point is a representation of a stored state of your computer's system files. You can use a restore point to restore system files from your computer to an earlier point in time. Restore points are created automatically by the restore of the system each week and when System Restore detects the beginning of a change to your computer, for example when you install a program or a driver.

  Create a restore point

  You can uninstall a program from your computer if you no longer use, or if you want to free up space on your hard drive. You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

  Uninstall or change a program

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• XP operating system with several iterations of mshta.exe in the Task Manager

  Last week, I saw several iterations of mshta.exe in my task manager. I don't know what it generates, or why the request is not closed properly

  Hi GFar74,

  MSHTA (Microsoft HTML Hypertext Markup Language > Host Application is a process that is running.) The HTA (HTML application) file, usually MSHTA charge once. HTA application must be running and then ends when the application ends.

  This problem may occur if a Windows system file is missing or damaged.

  Method 1: Run the SFC (System File checker) Scan. To do this, follow the steps below

  With the installation of Windows XP in the drive disc

  un) Click Start, click principally made programs, click Accessories, and click command prompt of

  (b) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the problem persists, this could be an activity of the virus

  Method 2: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start Explorer from the Task Manager shell, if another program is already specified as shell.

  Hey people.
  The company that I work uses Windows XP to run some software owners. Our software is configured to run as nt\currentversion\winlogon\ HKLM\microsoft\windows shell shell. I tried setting the shell two our product and random software like messenger or just the C drive, and every time when you use "run" of the Task Manager to open the explorer.exe shell, my documents will be opened instead of other things.
  It will open my documents instead of the shell until I have two close open windows, excluded the Task Manager and set the entrance to Shell back to "Explorer.exe".
  This problem persists between the platforms, and I've tried everything I can think of.
  Any help will be great.

  Hello

  Your Windows 7 is better suited for the public IT Pro on TechNet since your computer is on a domain network. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Why, when I have an IE open, I 2-3 instances of Internet Explorer in the taskbar?

  Thought it was weird, I wonder if I have a Trojan or something...

  Hi neilanderthal,
   
  -Are you referring to the entries in Internet Explorer in the Task Manager or the task bar?
   
  If you are referring to the Task Manager, a process is for the program and one for the responsible tab.
   
  This has to do with the added tab recovery feature that prevents the entire application to plant based on a single page allowing you to continue to use the other tabs. It is a normal behavior.

• Close Internet Explorer creates two elements of rundll32.exe * 32 on the list of the task manager that trigger the physical memory to 90-100%

  Close Internet Explorer creates two elements of rundll32.exe * 32 on the list of the task manager that trigger the physical memory to 90-100%

  You have IE set to 'delete browsing history leaving? "  Rundll32 (with a command line incorporating something in the sense of a call to a function ClearMyTracksByProcess in inetcpl.cpl) is generated to perform this action.

• Explorer Windows has stopped working. Same for the Task Manager.

  I have Windows Vista and have had this computer for several years.

  I tried to work on something yesterday and I found that all my Office 2007 programs would be would break immediately at the opening, while they were working fine a week ago (the last time we used them).  I ran the diagnostic program came not upward with anything and then installed a bunch of windows updates I received automatically.  When the computer restarts now, I get a window in the corner that says 'Custom settings', then a window appears and says that Windows Explorer has stopped working.  I can ctrl/alt/del and open Manager tasks, but when I try to do no matter what to whom, it also stops working.  I not to download anything so I really don't think it is a virus.

  I can't open programs or menus, even if I think I can get a screen of command.  I ran all the tests in the installation disc and did not get any where or the other.

  If anyone can help, I would really appreciate it.

  Thank you

  Mike

  I can show you a workaround until Microsoft fixes their problem.

  As soon as you enter the office hit

  1-CTRL/ALT/DEL to get into the Task Manager
  2. click on the tab Applications (top left corner)
  3. click the new button on the task (lower right corner)
  4. in the Open box, type explore and click the Enter key
  5 do step 3 and 4 once more as quickly as possible

  This should stop the process of recycling the error message

  After stops in the process recycling, you can leave the Task Manager and minimize the Explorer window.  Also, you should be able to leave the Task Manager and windows Explorer now.  If this is not the case, just keep the Explorer minimized window.

  You should now be able to use your computer as usual.

  Let me know how it works for you.  If it works well, spread the word.

• Windows 8 does not not log on screen, all black dekstop, explorer.exe, disc missing from the Task Manager

  Hey. I am a newbie in this forum. And I really like to make my PC more 'me' even though my parents and brother told me that my PC did not differ from how difficult. But, I still like my PC... ^ ^
  But my PC encountered a problem in my birthday (March 8, ehehe just FYI). Its a terrible birthday gift: (...) Oh, there. Its all started when I accidentally install a skin pack or win 7 in my PC 8 victory. There is nothing wrong with installing proggress except a notification which inform on win 7 Starter has not installed correctly. :( Well, I ignored, first. But after I have it reboot, my dekstop went all black but it still can open the Task Manager. And then I try the system restore. It did not work properly. The only thing made worse. Somehow, my "(le seul compte dans mon PC) DELETED account." In fact, the log on screen consist only of the ease of access and power button with backgorund optomistic. Where are the data of the user, I mean a place where we inserted the password? XC its make me super bad mood. And after some restoration system with various restore points, I restarted my PC in safe mode successfully. Yippie, its worked perfectly in safe mode. I created a new account in safe mode. I thought that my problem more but no. and the bad news is that there is only one user account (a new one) in the journal on the screen! It'll be better I have the new account very well work, but it didn't! The dekstop always all black with no taskbar and it's the same problem as the first.
  I am not really confusing. What should I do? Should I remove a skin pack safe mode? or reinstall win 8 in PC COUNTER? Or do something that you already know the guy?
  Help me. I am so irritated by this problem. In any case, I want to ask one last thing, you prefer something after me or just think it was a charitable organization? Well, I just want to know. And I'll do my best to show my appreciation once you help me. I am so TROUBLED even if today is my birthday! I want a big anniversary with neither party. But its seems no big birthday. Please, help me. His will probably be my MOST BEAUTIFUL GIFT to a person who I know in internet. If you need something detailed about my problem, ask me. I need your response. :") SURE ME MY CRAZY MOM, IF SHE KNEW IF I AM WRONG IN MY PC AGAIN.

  Oh, there. The explorer.exe does not start in normal mode, but it works fine in safe mode. Also, I discovered that the disc is missing from the Task Manager. :) Help?

  Wish you a very happy birthday, Damaris.

  Of course, I can understand the situation you're in right now, and it's a shame. I will be happy to answer your query and try my best to offer my help as a gift for your birthday.

  Let me ask you;

  1. What happened when you tried the system restore?
  2. What was the last time that the computer worked well?
  3. What security software is installed on the computer?
  4. Remember to no particular change in the computer before the show?

  The issue may be due to any dispute of third party software, virus or any system or missing files / corruption. Let's try the methods below and check the status.

  Method 1: Since you are able to start the computer in safe mode without any mistake, I you suggest to start the computer in safe mode and then perform the clean boot to avoid software conflicts.

  Step 1: Start the computer in safe mode (as you are able to start the computer in safe mode with the steps you tried).

  Step 2: Perform the clean boot

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3: Run the tool File Checker system in case where any system files are missing or corrupted.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Not close this command prompt window until the audit is 100% full. The results of the analysis will be posted when this process is completed.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  Hello

  1. are you able to use with other applications that connect to the Internet?

  2. when exactly you get this error message?

  3. should we come up with any specific Web site?

  4. what version of Internet Explore do you use?

  5. don't you make changes to the computer until the problem occurred?

  6. the problem occurs in safe mode with networking?

  I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  For your reference: Internet Explorer could not open the Search Page.  http://support.Microsoft.com/kb/219004

  Hope this information is useful.

• Dell inspiron n5010 laptop computer running XP, when I try to open my software programs including Internet Explorer, they hang and Manager tasks indicates "not responding".

  I have a dell inspiron n5010 laptop and when I try to open my software programs, including Internet Explorer / Outlook Express they partially open but not completely open and just hang out there. When I go to the Task Manager, I get a message 'not answer' for the program. I then started the pc using F12 and got the error OFOO C. 133 talked to Dell and they tell me that it is a Windows 7 problem. Can someone help me with this issue please!

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Inspiron-15-XP-laptop-getting-error-code-0f00133c/fd3d76ad-Ca4a-4830-9ef1-17ccb9a7d9f4

  Hello

  1. did you of recent changes on the computer?

  Method 1:

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  You can also try the steps of troubleshooting provided in the link below to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Windows Vista is running extremely slow and will not open the Task Manager or connect to the internet

  I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.

  Hello
  Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Problems with the closure, by opening the Task Manager and Norton Internet Security. Help, please!

  Hello

  I have a HP Pavilion dv7 with Windows Vista Home Premium (64-bit). Until Monday, there is no problem whatsoever with my computer at all. I have not installed or uninstalled, whatever it be, changed settings, done anything differently with my computer. Suddenly it now "hangs" on the screen of closing down. I'll try to reboot or stop using the menu start, and it will stay on this screen indefinitely. Now, I have to manually turn off the computer. I spent on the Support page and studied the Performance issues, and all I get is I have Visual settings that interfere with closing... except my Visual settings have not changed in any way. In addition, I can not properly update my computer or do a system restore because the computer will shut down.

  In addition, the Task Manager will appear no more. I'll press ctrl alt del and nothing appears, just the green icon in the corner of the screen. If I try to right click, no response.

  I tried to do a full system scan in Norton Internet Security but she "leaves" scanning. It will scan correctly when I'm in safe mode, but it comes with no virus, trojan or other problem.

  So in essence, I tried everything I can think of to fix my computer nothing works. It was working perfectly before this week. I have no idea where to go. Any thoughts?

  Thanks in advance,

  G

  Hello

   

   

  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.

   

  Method 2.

  Step A.

  Start your computer in safe mode and check if it starts.

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.

  
  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

   

  Method 3.
  I recommend to run the restore of the system in safe mode and check if it works very well.
  Reference:
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

   

   

  I hope this helps.

   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.