What are the ways to vCenter 5.1 5.0?

Similar Questions

• What are the requirements for vCenter Server 5?

  What are the requirements for vCenter Server 5?  Specifically, I'm looking at the vCenter Server Appliance but it is set to 8 GB of RAM.  I hope to run it on a lab at home that has only 8 GB etc. total RAM.

  The system requirements are here - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-installation-setup-guide.pdf

• What are the ways to access a remote database in a database completely different-schema - stored procedure?

  My source data in the remote database schema (say C3.case). And I am trying to insert data of this CASE table in my database table (for example SIMS.case) I use the stored procedure to load the data.

  I was going through the documentation and I thought that the creation of MV is not possible in this case is the source table in the remote database schema. Is this correct?

  or create a link DB is the only option available to access the remote database schema table.

  Thank you.

  Hello

  2929538 wrote:

  My apologies for the bad conventions help. I meant remote schema.

  the required data and the destination table, the two are in oracle, but in totally different schemas.

  Yes, you said a table is in a scheme called C3, and the other is in a schema called SIMS.  Are these schemas in the same database or in different databases?

  If they are in the same database, then you do not have a database link.  Or the other schema can reference tables in the other qualifying names correctly, for example

  SELECT *.

  OF C3. case_studies

  ...

  assuming that the right privileges have been granted.

  If the schemas are in different databases, a database link is the best way to access data in a database in a different database.

  Without a database link, you will probably use some kind of use outside the database to write the data to a database, the file if necessary, transport and read in other databases.  DataPump files of images or CSV files, as Paulzip said in answer to #1, could be used for this.

• I deleted my documents accidentally, what are the ways to recover

  I deleted my documents of the system folder. But it was not available in the recyclebin. How do I get it back please help me to recover my documents folder

  I deleted my documents of the system folder. But it was not available in the recyclebin. How do I get it back please help me to recover my documents folder

  "Deleting" a file does not delete actually it brand just space be used. There are third-party programs that can sometimes recover deleted files. The problem is that the space used by the file is likely to be replaced very quickly, and this makes the unrecoverable file.

  So your chances of successfully recover this file are decent, if you try it again immediately after deleting it and quickly down. If you have used the computer since then (for example to read this answer and write that question), your chances may be very weak now.

  But if the file is large enough, it's still worth a try. Stop using the computer in question immediately, if you haven't done so already. Download an undelete program (in here is one: http://www3.telus.net/mikebike/RESTORATION.html but there are many other choice; do a search) on a friend's computer and bring it to you on a diskette, CD, or drive to the thumb.

  If that fails, your only recourse is to bring or send the drive to a professional file recovery company. This kind of service is very expensive and may or may not work in your case.

• What are the different way of seeing the visitor record or profile captures information using eloqua?

  What are the different way of seeing the visitor record or profile captures information using eloqua?

  Hey Sanny,.

  There are three ways to view the visitor record or profile captures information using eloqua:

  • Contact & prospect downloads
  • submission of form data
  • cookie script & follow-up

  Thank you

• What are the native agents available in the ESXI if I plugged with vCenter!

  Hello

  Please let me know what are the available agents in ESXI, if it is connected to vCenter?

  HA - FDM

  Management - VPX

  Hi Hari,

  'management' of services agents on ESXi are under /etc/init.d that they are installed with the host software:

  pass, ntpd, sfcbd, slpd, wsman, vobd

  The agents that comes exclusively from vCenter Server are:

  vCenter agent:

  "vpxa" - the software that collects, communicates and executes the actions received from vCenter Server. The Server vCenter agent is installed the first time that any host is added to the inventory of vCenter Server

  Checking status: State of /etc/init.d/vpxa

  HA agent:

  "vmware-fdm" (FDM/Fault Domain Manager)

  The older pre 5.0 welcomes its AAM agent

  Kind regards

  P.

• What are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes game against external hard drive, Solid State etc. to store my songs iTunes, playlists, ratings etc?

  First question: what are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes Match against Solid State external hard drive etc to store my songs iTunes, playlists, ratings etc?

  Please let me know what are the alternatives for storage of my songs, playlists, song etc. other than iTunes game ratings ($ 24.99 / year)?  Is there a way to store all my songs with my song ratings, playlists, etc. with a CD song quality? Most of my (currently 130 GB) songs on my computer are CD quality that I prefer to keep as well as my notes of each song (i.e. 5 * vs. 4 * etc.), playlists, groups (music, classical, popular, country etc.).  What are the advantages and disadvantages to store my iTunes songs while CD quality with my personal notes, reading lists, groupings in the cloud?  ICloud of Apple Drive ($ 2.99 per month or $36 / year for 200 GB) would be the best way to automatically update and maintain my rankings iTunes personal including the future editions of the song etc or using Amazon, IBM, Microsoft etc cloud or an external hard drive SSD would work as well and maybe cheaper?  I currently have my iTunes on a PC of 2007 with vista (I use a 1 8T Western Digital external upward by car for my personal info all over HP, songs, photos etc. which is currently close to 170 GB) but also have an Apple i-phone 6 & I Air cushion.  Although I did not need to have all of my music with all their sides, etc. available on all of my devices at all times as iTunes game, I still would have easy access to information on both my PC and my iPhone or iPad?  Thank you.

  In my opinion?

  I back up my data to an external drive for several reasons.  The first is my data - if I put on the cloud, someone else has control over it, they can see what I have and change the preferences to what they see of marketing.

  Almost as important as that - if I had to rely on the cloud whenever I wanted to update my playlists on my phone, I need a better internet connection I have now (working at sea).  To get the best out of the cloud, you need a solid link to home, work or mobile.

  As a spin-off - I hate the fact that Apple take away a feature in their software updates and then allow an app to be sold in their store to replace this feature - or worse still, some features that were available before the updates are now "cloud only."  And Yes - you have to pay for the cloud.  I like most of the people do not appreciate the 'accomplished fact. "

  From the back of the external hard drive ASI downside, is that to be safe, you need to store outside in a separate computer place.  If keep you them together, if one is lost, probably, they are both.  That is to say for me a full backup before you travel, then a new upward as soon as I go home.  Downside is how much data may be lost between the two back ups if I needed to restore.  For me, its worth the risk.  If I was away and say had bought a ton of new music and couldn't go home anytime soon, I can always head to the store and buy a new external drive, they are massively expensive.  Even if my computer has to go for repair and my remote is to halfway around the world - I want to buy a new one.

  Now, some will say that once you buy a new external, you spend more than you would on a cloud subscription.  It's true, but in the 6 years following the purchase of Mac that I've only had to buy a new external once - so with a little luck and planning - it works.

  I left took well - I am not a subscriber of cloud, nor do I want to be.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What are the channels of meter on SMU-6361 pinout diagram

  Hello

  I've defined three channels of counters to help assistant DAQ for the SMU-6361 (ctr0, ctr1, ctr2) jury. I don't see any explicit labels on the pinout for the SMU-6361 card diagram indicating where are these counters. Can someone tell me what are the pins / labels on the diagram pinout for these counters?

  Thank you very much

  Hi Larrage,

  The best way to find the default pins use the DAQmx help file. You can reach to the MAX by clicking Help > Help topics > NOR-DAQmx > NOR-DAQmx help. In the help file, you can search for 'Connect signals to Counter' and click the link for the series of cards you have (series X in this case).

  In your case, the default meter terminals for ctr0, ctr1, output and ctr2 would be 12 PFI, 13 and 14 of the PFI PFI, respectively. Counter (for edge counting) entries would be 8 PFI PFI 3, PFI 0 to counters of same. You can change the terminals of input/output for counters in your VI or MAX, but these are the default values for the card.

• What are the units of the DAQmx meter?

  Hello

  I created this VI and several others like it, a few months ago, but I forgot some of what I have at the time.  I believe that this VI should measure period, using the counter on the chassis of the acquisition of data.  Can someone tell me the units of the measurement period?  I think it's seconds, but I am trying to find a way to understand this!  The period values are generated by the DAQmx READ function in the WHILE loop.  What units that work out in the table?  What are the units of the elements of the array, essentially?  See the attached VI.

  In addition, how do you know?  I opened the DETAILED HELP for the DAQmx Read (minimum 1 D NSamp DBL) shows the VI but, I can't find anything on the units of data coming out of the Terminal marked data with the orange wire, which is actually an array of periods, and we take the average of the most recent measures period 15 or more.

  I had a suggestion months ago for a line OR manual containing a description of the measures of buffering EdgeCounting, but when I went to find it, the link had been changed by NEITHER, so I find that manual, but I think the answer is probably there because I remember this manual is very helpful when I've done it before.

  Thanks for the tips.

  HI dav2010,

  When you create a virtual channel, you must specify the units of the task of counter uses.  There are several options that are listed in help here:

  http://zone.NI.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxcreatechannel/#DAQmxCreateChannel%28CI...

  I'm not on a computer with LabVIEW now, but I think the default should be ticks, which is the number of ticks the time base of your device.  You can find this information in your hardware specifications.

  Kind regards

• If I create a WinPE 2.0 distribution (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license?

  The WinPE Licensing implications

  Hello

  I have a number of customers with machines that are fully licensed with XP, XPe or Vista.
  Each of these clients have a device that we have created, piloted by drivers custom within the OS.  The operating system will sometimes funny (corruption, etc.) causing the device to not function.
  I decided to create a diagnostic utility to check whether the fault is in the operating system, driver or device.  Because the fault could be deep in the operating system, the only way I can see to do is through WinPE
  I searched the net, but can do not seem to arrive at an acceptable legitimate answer... So here's my question.
  If I create a WinPE 2.0 distribution, either for CD, USB or chain loaded from Linux (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license? Is it legal?
  Operating system licenses are not owned by us, but our customers if we do not have mass of licensing agreements or something like that.
  The plan is to create a unique distribution and add drivers to it that we encounter different machines.  I know it's frowned upon to speak Hirens on a MS site, but something similar to that (I won't use Hirens because I want that it is completely legitimate)
  I called him to the reading of the license with WAIK, but can do not seem to find anything about this.
  Thank you

  Hello

  This is not a question of normal consumption. I suggest you to contact our Legal Department for legal terms Express. http://www.Microsoft.com/about/legal/en/us/default.aspx

  I also suggest that you send your query in TechNet and check.

  http://social.technet.Microsoft.com/forums/en-us/operationsmanagergeneral/threads

• Linksys E3200 - what are the parameters that I need to change to get the full speed wireless?

  Hello, I never had a router before.

  I just bought Linksys E3200, because I need a wireless connection on my HTPC.

  I only put a password for my network. Don't touch or changed the factory settings.

  My main PC is connected to a router via a network cable,

  my HTPC is wiresly connected using the Linksys EA2500 wireless network card. I had a wireless connection.

  However, my internet speed on my main PC (cable) is COMPLETE and about 50 Mbit/s.

  Wireless on my HTPC is max 10 Mbpsspeed.

  My modem, router, main PC and HTPC are in the same room next to the other.

  What is the problem? What are the setting do you recommend to change?

  Thank you.

  Ensure that networks in the router (5 GHz and 2.4 GHz) have unique names on the other. This way you will know what network the HTPC is connected to. After making sure that the two networks have unique names, change the channel to the network of 2,4 GHz. try 1, 3, 6 or 9.

• What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives?

  What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives? -Dell Vostro 1710, my wife had to be returned to Dell, I installed its Vostro hard drive in my Dell Vostro 1710 SAME, but I don't get a menu starting double when I turn on my Vostro. (Both Vista Business operating systems are licensed separately).

  I would like to start his drive hard so that it looks like 'his' office on 'his' computer.

  Thanks for any advice.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/how-do-i-set-up-a-dual-boot-vista-and-xp-with-2/d1e95c26-0e48-4a8d-9e0f-526da19dce52?tm=1336794280998

  The easiest way is to use the DualBoot Pro.  He has the tools to write the necessary code automatically.  It is excellent for managing the tasks you want to do.

  However, you have a potential license problem.  Even if your Dell has the exact code in the BIOS to activate the copy of Windows on the hard drive of your wife, the computer is only allowed for an OEM copy.  If Dell is back after repairs then you should be OK once you have turned on the hard disk in his computer of your wife. You can delete the entry of additional start with DualBoot Pro menu,

• What are the benefits and drawbacks of shredding MFT space?

  Original title: MFT Shreading

  Can someone tell me the advantages and disadvantages of shredding space free MFT, I heard a lot of different accounts of the benefits to do so.

  Hello

  Grate way to remove a file or folder completely so that it cannot be recovered.

  The reason why we need to destroy unused disk space, is that when you delete a file from your hard drive, it does not get deleted from your drive hard data from the index to the file system entry is deleted. And the space that is occupied by these data is marked as free and made available for the storage of new data on it. But it is that deleted data still there exist on your hard drive physically.

  If you have deleted your data sensitive hard drive, which is secret, then it is advisable to opt for the destruction of unused disk space where the deleted data are hidden. By doing so, you can achieve the security and confidentiality of your data. What are the advantages, disadvantages could be that if you grate a folder and go back, you only may not be able to that it will be gone forever. He must be careful that crush us.

  For more information, please see the link below:

  Master file table

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa365230%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Get back to us if you have any additional questions.

• What is the way to find out which app is downloading data from the internet?

  Every time I connect to internet, I see that nearly 100 MB of data is is downloaded, without my consent. I did almost all the applications that I know to ask my permission before you download.

  Yet, some applications are downloading data without my consent.
  I would like to know what are the applications that do.

  What is the way to find out which app is downloading data from the internet?

  There is background applications that automatically transfer and receive data when the computer is connected to the internet. Try if there is active apps running.

  1. click Alt + Ctrl + Del to go to start Task Manager / Applications and end unnecessary tasks.

  2. go in Control Panel / programs / uninstall a program and uninstall unwanted programs.

  I hope this helps.