Several calls to transport.isConnected () (SMTP) on IIS causes 421. Known issue?

Similar Questions

• I received several calls from a person claiming to be from microsoft

  I received several calls from a person alleging to be from microsoft saying: they received the information from my computer on which it runs slowly and to turn on my computer so that they can do the steps to put it right, I did not what I was skeptical, but he was insistent that I turn on my computer (Incidentally it was already running) I refused this and he said I should do what he says.  I put the phone down, but it rang again and insistent, he rang the Bell and then twice that I ignored it.  However, he then rang again later andmy husband responded, he said himwe do not need its services because it was thought not good, as I already told you this gentleman I was under the impression that it was not kosher, insisted that it was.  So what is happening here.   I'm not what anyone on the screen. Also when he got my phone rings me and someone from microsoft would be ringing me, as I have him suggest that I wouldn't do anything on my computer but it would write with information on.thank you for your help

  * original title - WHO IS ALL THIS ABOUT? questionable phone call! *

  Hello

  Its a SCAM!

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have received several calls from a company called the Technical Department of "eprotectionz" offering to get rid of the virus, is this a hoax?

  Hi there, hope someone can help me on this issue.

  I received several calls from a company called 'eprotectionz' technical department which proposes to rid your computer of an "infection" (no virus) apparently slowing down Windows. In a first time, I finished the callwhen they began to ask questions about my computer.  They are appatently a global company - I am based in Australia and on checking their site, they operate out of the Australia and other countries. Their phone number here in Aust is 02-8091-0114. This company is legitimate.  I become more suspicious when they ask to enter my computer remotely while I followed the instructions to remove the so-called infection.  I don't trust everybody these days and trust no one! What do you think?? Thanks in advance,

  Australia. Take a look at this, mate.

  http://www.troyhunt.com/2012/08/virus-scams-social-engineering-victims.html

  E protection in action http://www.troyhunt.com/2012/04/type-www-ok-w-w-w-d-o-t-antagonising.html

• Response of the SMTP Protocol: 5305.7.0 must issue a STARTTLS command first.

  Insufficient information provided in the error message generated by the error of MSN O.E. advises: Message could not be sent because the server rejected the sender's e-mail address.

  ISP is Sympatico.

  Response of the SMTP Protocol: 5305.7.0 must issue a STARTTLS command first.

  Q: what is the Protocol, and to «Who» the STARTTLS command is sent?

  Your server wants to TLS encryption and you have not enabled in the properties of the account.

  The client sends the STARTTLS command to the server.  See this: http://en.wikipedia.org/wiki/Transport_Layer_Security

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• How to avoid the stalemate between count with all and several calls from an EP getBackingMapEntry...

  We have a processor input, which initiates a transaction lite by calling getBackingMapEntry on several similar entries.  The same cache distributed these similar entries of accommodation also simultaneously services count with all call and we often a blocking scenario comes from the fact that the count with all call trying to access/key in the same cache block - but in a different sequence - date entry processor accessed (for example, the European Parliament access to similar input 1 then similar input 2 while the count with all attempts to block the same but entries in sequence 2) then the entry 1).  The obvious solution is to change the sequence entry processor accesses these entries to match the sequence used by the count with all operation, but we do not know what sequence consistency applies to operations NamedCache.getAll.  Anyone know?  We believe that we excluded (e.g., consistency does not consider wrt the count with all access sequence) the following:

  • The sequence in an ordered collection of keys such as a list that is passed as an argument to count with all operation
  • The hash code of the key value
  • Any use of Comparable on the keys

  We use 3.7.1 consistency where it varies between 3.7.1 and 12 c.

  Thanks in advance.

  We've thought of it (always happens shortly after the publication on a support site).  If anyone is curious, it seems that the binary class implements Comparable and that consistency sorts instance converted by binary key and access the Scriptures based on this order sorted.  If the entry processor converts the keys to binary instances, sorts and accessed in sorted order, there is no potential blocking (of our observations, at least).  It would be nice if Oracle should document this that people better understand how to write safe concurrent code.

• Connection of several call library function node

  

  First of all, I apologize if some of these issues are pretty basic. For my work, I have been teaching myself LabVIEW (using one of the books) for the last two months, in addition to a course of semesters of C++ software development. I have flowed through a few examples from the book and have searched these forums + google search, but I found the contradictory and confusing information on how to manage the C string data.

  I have attached a photo of the block diagram, the real VI and a manual describing the .dll file I'll call you. My real application is more complicated than what I've built here (I installed a trial version free at home, since I can't bring my lab computers files due to their having no do not have access to the internet...) There install everything for us, but it's a side story!), but deals with execution other than that, as I have the VI wrapped around an imposing event that runs based on which side a user presses the button, messages pop up additional user, etc..

  In the end, I'll implement a program which allows a user presses a single button that sends a bunch of instructions to an instrument, where requested orders have been compiled by the society of the instrument in a couple of .dll files. The instrument itself be held the certain function specifications, so there is not much need to worry to get somewhere, out string parameters to be stored, and there is no reception data of the instrument: it simply distributes liquid charges based on what parameters I pass to it. Given the same internet connection problems, I have to wait a few weeks for my IT team installed a decompiler of .dll file on the computer that has installed LabVIEW so that I hope that I can directly import the header file in the Import Wizard. I worked out of their manual without even being able to look in the .dll file (which may be more documentation), and they do not have the more detailed documentation on their data types (even if maybe these data types are public knowledge, and I'm just missing something). I went ahead and copied + pasted some of their function prototypes + example code pages 16 and 17 of the provided pdf (it looks like to me a C calling convention):

  'Functions of the DLL to talk to the PiezoElectronics.

  Public Function declare bfx_piezo_OpenPort Lib "bfx_piezocontrol.dll" (ByVal portname As String) As Integer

  Public Function declare bfx_piezo_ClosePort Lib "bfx_piezocontrol.dll" () As Integer

  Public Function declare bfx_piezo_ConfigurePiezo Lib "bfx_piezocontrol.dll" (ByVal ability As Double, ByVal VoltagePerStroke As Double) As Integer

  Public Function declare bfx_piezo_SetupPiezo Lib "bfx_piezocontrol.dll" (ByVal StrokeLength As Double, ByVal DownStrokeVelocity As Double, ByVal HoldTime As Integer, ByVal UpStrokeVelocity As Double, ByRef LoadTime As Double, ByRef LoadCurrent As Double, ByRef UnloadTime As Double, ByRef UnloadCurrent As Double) As Integer

  ' Search for electronics

  RC = bfx_autodetect_SearchPiezo (False, PiezoElectronicsPort, PiezoElectronicsDev)

  If rc = 0 then MsgBox("No electronics could be detected", MsgBoxStyle.Critical)"error message LogLabel.Text ="no electronics could be detected.

  On the other

  Action.Enabled = True '

  Device found-> activate the button LogLabel.Text = "Piezoelectronics" found on the Port & PiezoElectronicsPort

  RC = bfx_piezo_OpenPort (PiezoElectronicsDev) ' establish communication

  If rc = 0 Then LogLabel.Text = "open e".

  End If

  End Sub

  Private Sub Action_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Action.Click

  Dim rc As Integer ' to store the return code of the dll

  Dim LoadTime, LoadCurrent, UnloadTime, UnloadCurrent As Double ' to store the values returned by the dll

  RC = bfx_piezo_ConfigurePiezo (PiezoCapacity, PiezoVoltagePerStroke) ' Tell the dll of the distributor of physics

  If rc = 0 Then LogLabel.Text = "Configured distributor" "configure the parameters of dosage

  RC = bfx_piezo_SetupPiezo (stroke, beat down, HoldTime, ascending, UnloadTime, UnloadCurrent, LoadCurrent and LoadTime) rc += bfx_piezo_Repeat (repetitions, RepeatDelay)

  If rc = 0 Then LogLabel.Text = "Setup dosage settings."

  Only four interested features me search piezo, open port, configure piezo and piezo installation, as seen on my block diagram. My questions concern only the setup functions / openport piezo and how I built the library call nodes function, since these would also address how to set up the other two. When running VI, I get the error code is 1517, with installation function highlighted, leading me to believe that I have this feature badly adjusted upward (and Potentially openport, explained in the next paragraph).

  Function to open the port has two string parameters that are passed by reference, and configure the function takes one of the following strings as a call by value. Can I just wire them together as I did, or is it necessary to do something in the sense of adding a sub - VI GetValueAtPointer to dereference firstly, the pointer to the string and then spend the actual string on the second node?

  To specify the data types in the function library call nodes, I have all channels like C strings, double as double, return numeric values as integers signed 32 (each function returns a digital long I think that for debugging purposes), Boolean as an integer 16 bit signed (after that I forced my Boolean constant in an integer) and one of my numbers in Setup as an integer no signed, as I was told in an e-mail from the manufacturer of the instrument. Should we indicate the call launched by numbers as constants value, or not, since they are not explicitly defined as constants in the code provided? Since they have been specified not as long, I am right to assume signed 16-bit integer for the passage by the digits of the value? Is the Boolean value a 8-bit or 16-bit and signed? If the function has a numeric parameter as a value call, I guess by the wiring in a digital constant, that this value is transferred to the function?

  Again, I apoligize if these questions are too simplistic (and many of them), due to my limited experience programming and possibly scarce documentation of the company during the inspection. I look forward comments about the VI as well, if I had nothing at all just illegal/bad practice.

  Thank you for your time!

  First of all, I'm really not familiar with C/C++ dll, but I remember something the DLL must contain the standard C functions to properly accessible from LabVIEW. I don't know if this is the case here, but lets see more will enlighten this part.

  Second, whenever I have the chance to directly use the simple series commands, I go like this, and I create my own live LabVIEW. As I see in the attached pdf doc, it is possible to order the material through the series without using the DLL (on page 18). If these features meet your needs, I would really screw via VISA program, your life will be much easier...

  Edit: http://www.ni.com/tutorial/3702/en/

• How to call a jar file using the IIS virtual directory

  I have my application with limited functionality and I am trying to deploy a jar files in my library files, IIS is my web server. I want to create a virtual directory and I should be able to invoke the new jar of the virtual directory. Any thoughts?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Several call to the method of painting

  Ask for help on one of the most common problems in the development of BB UiApp. My method of painting is called more that I can think of logicall. Ask for help to understand why its happening

  Looks like my request

  CFL extends ListField implements {ListFieldCallback}

  }

     public int moveFocus(int amount, int status, int time){        invalidate();     return super.moveFocus(amount, status, time);    }    //Invoked when this field receives the focus.    public void onFocus(int direction){        _HASFOCUS = true;        super.onFocus(direction);    }    //Invoked when a field loses the focus.    public void onUnfocus(){        _HASFOCUS = false;        super.onUnfocus();        invalidate();    }    //Handles trackball movement on all directions    public boolean navigationMovement(int dx, int dy, int status, int time){               if (dy == 0 && dx <= -1){                /*do something*/           this.invalidate();        }else if (dy == 0 && dx >= 1){                /*do something*/           this.invalidate();        }        super.navigationMovement(dx, dy, status, time);        return false;    }    public void drawFocus(){
  
      }public void paint(){  /*paint the list row and the highlight manually*/} public void drawListRow(ListField listField, Graphics graphics, int index, int y, int width) {        // TODO Auto-generated method stub    } //Not yet implemented public Object get(ListField listField, int index) {       // TODO Auto-generated method stub        return null;  } //Returns the preferred width for the control public int getPreferredWidth(ListField listField) {       // TODO Auto-generated method stub        return this.getWidth();   } //What is this one? Looks like search public int indexOfList(ListField listField, String prefix, int start) {       // TODO Auto-generated method stub        return 0; }
  

  I created the ParentScreen stretching from the main screen with a verticalfieldmanager and custom list field inserted into it with 2 other controls.

  Now when I run the app and I move the focus to the top or to the bottom of the painting, the method is called 4 times. I expect the paint method to get called time or max 2 times. , but the paint method is called 4times.

  Here is the stack trace. I am trying to understand why this is happening from the stack trace, but can not understand. Can someone explain to me. Here is the stacktrace for all 4 calls to the methods of painting. Can someone explain?

  Stack trace for 1st call to paint method-----------------------------------------CFL:paintCFL(Field):paintSelfParentScreen:doRemoveFocusParentScreen:doFocusMoveParentScreen:navigationMovementParentScreen:dispatchNavigationEventUiEnginerImpl:processMessage
  
  Stack trace for 2nd call to paint method-----------------------------------------CFL:paintCFL(Field):drawHighlightRegionCFL(Field):drawFocusCFL(LisField):drawFocusParentScreen(Screen):doAddFocusParentScreen(Screen):doFocusMoveParentScreen(Screen):navigationMovementParentScreen(Screen):dispatchNavigationEventUiEnginerImpl:processMessage
  
  Stack trace for 3rd call to paint method-----------------------------------------CFL:paintCFL(Field):paintSelfVerticalFieldManager(Manager):paintChildVerticalFieldManager:subpaintVerticalFieldManager(Manager):paintVerticalFieldManager(Field):paintSelfVerticalFieldManager(Manager):paintSelfVerticalFieldManager(Manager):paintChild
  
  Stack trace for 4th call to paint method-----------------------------------------CFL:paintCFL(Field):drawHighlightRegionCFL(Field):drawFocusCFL(ListField):drawFocusCFL(Field)paintSelfVerticalFieldManager(manager):paintChild
  

  As far as I know, invalidate will get infrastructure to call paint twice, once to paint blurred and new areas to paint the update.  Why don't you try disconnected from the moveFocus() to see what changes this causes?

  About drawFocus, you have not overridden the drawFocus at all routine, because his signature looks like this:

  protected void drawFocus (graphics graphics, boolean on)

  You have substituted him:

  Public Sub drawFocus()

• Several calls simultaneous webservice for the same operation

  I'm having a problem trying to call the web service even operation twice with different parameters. The call is executed twice (I'm passing data token in order to differentiate the event handler calls), but the parameters of the second call are replacing the first. Here is the code:
  
  .the wsCodeList ["GetTupleList"]. TupleName = "BUSTYPE";
  Subject: call var = wsCodeList ["GetTupleList"] .send ();
  Call.destination = "busType";
  
  .the wsCodeList ["GetTupleList"]. TupleName = "ENTTYPE";
  Call = wsCodeList ["GetTupleList"] .send ();
  Call.destination = "entityType";
  
  MXML:
  
  < mx:WebService id = "wsCodeList".
  "WSDL =" http://simulacrum.hallmarkins.net/ProgramQuoter/codeList.wso?wsdl "
  useProxy = "false" result = "onCodeListResult (event)" >
  < name mx:operation = "GetTupleList" resultFormat = "e4x" / >
  < / mx:WebService >
  
  Manager:
  
  private void onCodeListResult (oEvent): void
  {
  Subject: call var = oEvent.token;
  var xmlResult:XMLList = oEvent.result;
  trace (Call.destination);
  If (call.destination is "busType")
  {
  busType.dataProvider... xmlResult = mspace::description;
  }
  If (call.destination is "entityType")
  {
  entityType.dataProvider... xmlResult = mspace::description;
  }
  }
  I'm back only the expected result for the call to TupleName "ENTTYPE" twice. So it seems that the setting is getting crushed until the call goes out. What I am doing wrong?
  
  Thank you
  
  OLIVER

  First of all, use AsyncToken instead of the ordinary object. From there on.
  Tracy

• The call to URLLoader AIR in Quick Succession causes error 2032

  Hi all

  In the AIR, I publish several POST with URLLoader calls in quick succession to the same web service on the same server.

  About half of them fail with error #2032. In HTTPStatus Manager, I get the status = 0.

  I suspected persistent questions, so I added "content: close" header URLRequest and done that I called URLLoader.close (), as soon as I got a successful response to calls that succeeded, but no joy.

  I would like ideas.

  mlavie

  you call different scripts?

  If so, it shouldn't be a problem.  If you call the same script multiple times, you must wait before complete event publishes again another call from the script.

• No sound with phone calls, known issue?

  Has any body had this experience? Phone was working fine this morning. The person I call hear me very well, but I get nothing. Also receive nothing when I switch to speaker. The volume is completely upward. Other thin media works. When I connect my bluetooth headset, it works fine. I have tried everything; turned off the bluetooth, factory reset without restore, safe mode, etc. I get nothing.

  Unfortunately, it was my replacement phone, from their experience of the "split screen" issue

  With what you already have, I think it's time for you to call/chat with bike for a possible replacement. I hope this helps.

• Name of the caller is not showing blackBerry Smartphones don't not (single issue)

  Dear all,

  I wonder if anyone can help please. When I receive calls on my Blackberry Curve 8900 - the name of the appellant are not displayed on the screen (only the phone number). I saved all the names in my address book. I find it quite frustrating (I never know that name and had to memorize numbers).

  Thank you in advance for your help! Best regards, Irene

  Hello and welcome to the Forums of Support BlackBerry.com.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• Delays in DAQmxWriteRaw when you use several cards PXI-6733

  Application:
  I have an application that generates and writes the analog data at 300 kHz slightly underneath.  Data generation and output take place every 14 ms (we'll call it who a 'block',) through an event EveryNSamples leave a timing sheet.  In each block, 4000 samples of analog data are generated and output to 6 of the 8 channels of analog output of the PXI-6733.  The output buffer is set to twice the block 4000 writing samples and pre-filled with 4000 zeros, so the output is always a block behind the data generated.  If a single block exceeds 14ms to generate and write on the analog samples, the output buffer will be against the wall and exit stop (regeneration is disabled.)  I recently needed to add more than 10 output channels, so I installed a second PXI-6733 map in the chassis and set up a second analog output task to write the second map.

  Problem:
  As analog data are generated on demand in each block of 14 ms, the program cannot take more than 14ms to generate the data and write them on the cards, otherwise we will underflow analog output.  Thus, any unwanted delay must be avoided.  Data generation stage does not take very long (in my test it is off and decision< 1ms,)="" but="" i'm="" seeing="" some="" problems="" when="" i="" write="" the="" data="" to="" the="" pxi="" cards. ="" i'm="" using="" the="" daqmxwriteraw="" function="" to="" write="" the="" samples="" to="" the="" cards. ="" the="" function="" is="" being="" called="" twice="" every="" update="" loop:="" once="" for="" each="" output="" task="" (card). ="" when="" i="" added="" the="" second="" card,="" i="" noticed="" that="" occasionally="" the="" call="" to="" daqmxwriteraw="" would="" take="" much="" longer="" than="" 14ms,="" causing="" buffer="" underrun="" errors="" (-200016)="" on="" the="" second="" card,="" or="" regeneration="" errors="" (-200290)="" on="" the="" first="" card. ="" i="" inserted="" timing="" markers="" around="" each="" call="" to="" daqmxwriteraw,="" and="" i="" see="" that="" normally="" the="" calls="" each="" take="" around="" 4.8e-5="" seconds="" to="" complete="" on="" card="" 1="" (whether="" alone="" or="" in="" conjunction="" with="" card="" 2). ="" on="" card="" 2,="" the="" calls="" take="" usually="" take="" about="" 4.8e-5="" seconds="" to="" complete,="" but="" they="" occasionally="" spike="" to="" between="" 5="" and="" 40ms="" (e.g.="" 6="" out="" of="" 300="">

  I wonder what would cause these erratic spikes in time it takes to DAQmxWriteRaw BIE called on the second card.  Is there a known issue with the help of 2 PXI - 6733 s in the same PXI chassis?  Could there be some sort of conflict of resources (not enough channels DMA, etc?)  The two report cards they have in DMA mode, and fill FIFO priority is set to NotEmpty.  The problem also occurs when the transfer mechanism is set to interruptions.

  Other Observations:
  I noticed the first edge of calendar corresponds to the point in the program to the location of loading the dll "nicesru.dll."  I can't find any information that features in this dll, and I don't know if it's a symptom or a cause.

  I also noticed that when an error occurs, I can't seem to stop and clear the tasks of production.  After trying to stop it and cancel all active jobs, keeps blinking the link on the PXI chassis light.  To reset, the only way is to go into solution of measurement and Automation Explorer and reset the second card 6733 manually (or use ResetDevice C calling).  There seems to be only the second PXI-6733, and it also happens when using the test panels in the MAX program.

  Material:
  PXI chassis, 1033
  1 x card synchronization PXI-6608
  2 PXI-6733 analog output cards x
  1 x card PXI-8461 CAN
  PXI, PCIe - 8361 I / map F

  Dell Precision T7600
  E5-2687W CPU Xeon

  Software:
  Windows XP SP3 32-bit
  NOR-DAQmx 9.0.2
  Visual Studio 2008 sp1

  I was able to solve the problem by moving the PCIe card in the PC to another location.  I assumed the problem was with how bus PCIe are managed by the motherboard, or how the resources have been allocated to the cards in this particular niche.  Move the map on the slot 16 second x on the motherboard seems to have solved my schedule delays.

• the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

  original title: Devicewhat is the error code 21

  I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

  Hello

  We really need more information - ask in the games and/or Windows Forums for your
  version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  You can also check your version of Windows, then good topic Windows: games.

  It is a question where you may need to actually test in several forums.

  Don't forget to check the known issues with the support from the game and forums, but also any device
  in question.

  -------------------------------------------

  Reboot to see if the problem comes back.

  Here are the general meaning.

  21

  Windows removes this device. (Code 21)

  Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite