Several connections open db in a weblogic cluster

Similar Questions

• How to operate with several connections open for VCs (Connect-VIServer).

  Hello:

  I know that I can open multiple connections to VCs (Connect-VIServer), but do not really understand how to run with them...

  How can I speak in VC1 for a single operation and after that VC2 to another without closing the connection in VC1?  I might need to do this several times in my script...

  Any help and simple example will be really appreciated.

  Thank you

  qwert

  The cmdlet Connect-VIServer of PowerCLU 4u1 leave takes supported several open sessions.

  The sessions are stored in a table called $defaultVIServers.

  If you need restore an open session, you can use the entry for this server in the array and then use the SessionId property to make this session open session / by default (which is stored in the variable $defaultVIServer).

  Something like that

  Connect-VIServer -Server VC1
  Connect-VIServer -Server VC2
  # Show the sessions and their properties
  $defaultVIServers | Select *
  
  # Open the session to VC1
  Connect-VIServer -Session $defaultVIServers[0].SessionId
  
  # Open the session to VC2
  Connect-VIServer -Session $defaultVIServers[1].SessionId
  
  # The open session
  $defaultVIServer
  

• Whenever I try to open a new tab in Safari, it closes in on my previous page. How should I do so that I can have several tabs open?

  Whenever I try to open a new tab in Safari, it closes in on my previous page. How should I do so that I can have several tabs open?

  What version of OS/Safari do you use?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

  Safe mode - Mavericks

  Safe mode - subject

  Safe mode - Yosemite

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• keyboard no one and several windows opens automatically

  The last few days Ive seen the following problems with my laptop:

  1. on a normal startup

  several windows open automatically without prompting to the keyboard. The first window is usually the Help window, and then opens the default browser window as well. 10 - 15windows opens in a duration of one minute and continue until I manually closethem or at the end of the process in the Task Manager.

  This experience on the admin user and others

  2. Alternatively on the boot of startup window stops and asked to choose an operating system.  This machine has only win7 on it. no option cannot be selected as keyboard stubbornly inactive you.

  3.

  If by chance the machine decides to start, I can not connect to the user, because the keyboard is not responsive

  If I get the admin user for which I have no password... anything can be typed keyboard non-responsive rest like a potato.

  It seemed that the keyboard was defective, so ive got changed, but the problem persists.

  Help, please.

  Of course, it looks like infections are present.

  Run ADWcleaner https://toolslib.net/downloads/viewdownload/1-adwcleaner/ it's free and one of the only malware cleanup tools that I trust.  Malwarebytes can be used, but be careful to not take the trial or use the pro version.  Virtually all the removal tools known as maleware are in themselves of malware.

  If you are unable to get sufficient control, download ADWcleaner into the USB port on another computer.

  I assume you mean to Internet Explorer (IE)?  If you are, reset

  Tools, Internet Options, advanced.

  Multiple OS question at the start is usually someone re - install Win7, but unless you first delete the existing partition.

  Now, this is a controversial subject, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I care about 140 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on more than half of these PC so far and has never been a problem.  In fact, I think it's a better product than even Norton.  One of the things I love the most about it, is the silence and discretion.  It is also cheap.

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that the other components of these products (other than the AV itself) IS caused more problems than any profit that they bring and work primarily by stopping the Windows component that does a very good job of this particular task still.  My problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said.  It is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Another thing you need to know: you can delete not entirely of most any AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• When there are several tabs open, why the search always take place on the 2nd tab (first tab seems never to change the homepage) despite my selection of a different tab where to do a search on google?

  I have Mozilla Firefox 10.0. When I open it, it opens properly on the homepage in the first tab. Once I have another, or several, tabs opened, any tab is active, your google searches, I immediately takes place at the No. 2. Do not count how many times I go to the tab for example 4 to search (because I would compare with the page Web open in a tab 2), but it does still today the Search tab 2. It's very irritating. It must be a setting that went pear-shaped, but where / who? Any suggestions? Thank you.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Scanning preview. He made several PDF opens at the same time. Combine one?

  I use a scanner to digitize old financial records as pdf with preview files.

  The problem is if you do not do so in a single batch, the result is that you do not get a single pdf file. You end up having several files opened, named "Untitled", "Untitled 2", "Untitled 3" etc. "

  Is it possible for one) avoid what is happening in the first place? or (b) just tell the computer to merge files into a single pdf file?

  If I could do it easily the whole operation would be less stressful.

  I think remember me something useful:

  close the preview.

  Select all the files you want.

  Drag them (in a group) on the preview icon.

• Disagreement with Firefox 3, Firefox 4 does not register the tabs open when I leave to have several tabs open. How can I do this in Firefox 4?

  In Firefox 3, when I got to close the program to have several tabs open, Firefox asked me if I wanted to save and remember the tabs open, so that I can get them at the next restart of Firefox. Firefox 4 is no more. Is it because I have have not properly set up somehow, or is this normal? How can I recover this function?
  Thanks in advance,
  Andrea

  A Firefox 4 is from Firefox showing the default warning message will stop, but it can be turned on again by changing some preferences.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Find browser.tabs.warnOnClosepreference, if its value is set to false, double-click on it to change its value to true
  4. Repeat this for 3 preferences browser.warnOnQuit, the browser.warnOnRestart and the browser.showQuitWarning

• 63 error to TCP connection open in Simple data Client.vi when connecting to the network storage device.

  Hello

  I tried the simple data client and simple example of data server. I tried this example to connect to a NAS device. My laptop properly communicates with the device since I ping the address of the NAS device and discovered it works perfectly fine. Also, I put the static IP of my pc even as the NAS. So everything I've done. But when I run the program giving the ip address of a NAS device, it shows an error 63.

  Error 63 to TCP connection open in Simple data Client.vi

  Possible reasons: LabVIEW: serial port receive buffer overflow. = LabVIEW: the network connection was refused by the server.

  Why is happening. What can be done to solve this problem. Thanking you.

  vindsan wrote:

  What is the firewall of the SIN.

  Yes, it is very likely. Try disabling the firewall and try again. If the code works when you run the Server & client on your machine, but not when you run the server on your NAS and client on your machine (assuming you have entered the correct port for the NAS server), then it is very likely to be a firewall problem.

  vindsan wrote:

  Server that is listening is no longer VI also means what.

  Your VI server listens only once for a connection after receiving an incoming connection (or it expires after 60 years), he stops listening and the port will be more open for incoming connections - you must re - run the VI for another connection. With your code, you must run the VI server and then run the VI client in the 1960s, so it's not expire.

• Jabber Client several connections problem

  Hi all

  We have this weird problem where the user is automatically signed out on a regular basis and re-login, it gets an error "you have been out of the Cisco Jabber because several connections are not allowed."

  How can I determine if the user has signed places more than 1.

  try looking in the file under the roaming folder. file name should be cachetftpconfigstore or jabber - config.xml file

• Firefox does not ask for confirmation when exit/close with several tabs open

  I'm having the same problem as user here: https://support.mozilla.org/en-US/questions/1139845 (only I have different OS)

  When multiple tabs open, Firefox ask me never confirmation when I click Firefox close window button in the corner (usually accidentally). And I would like confirmation.

  about: config I have:

  true browser.showQuitWarning (it is marked as custom value (bold), default is false)

  true browser.tabs.closeWindowWithLastTab

  and when I close Firefox (usually accidentally) I get window of journalist of crash that I submit usually.

  Update: claims of a member who never close the confirmation appears for only one Firefox window, only several windows of Firefox. According to me, that this is of people probably half of bad idea is not using multiple windows, only the multiple tabs.

  The-edmeister says

  All you need to do is use the Previous Session Restore, either the default value: House in the lower right corner or history homepage > restoration of previous Session. ...

  Thank you very much for the input. Indeed, I go to Options/General and together "when Firefox starts:" 'Show my home page' and when I click on X to close the FF button, then asked to FF:

  "Want you Firefox to save your tabs for the next time it starts? I click on "Save and exit" when I start FF, tabs are automatically re-open! :-) It's very, very happy.

  I never thought tabs will be reopened when the blank page is set initially. And I did not tried because I usually have several tabs open, so do not wanted to risk. For me, the issue is resolved. THX

• Field unique unique host 1 Admin and managed 2 weblogic cluster

  Hello

  I am configuring the Manager node for automation of graceful start and stop of admin and the managed server.

  weblogic cluster configured on a single host machine. Configure an admin and 2 managed server. It contains an area of application.

  Admin urt is http://hostname:9001 / Agile

  Management 1 http://hostname:7001 / Agile

  Run 2 http://hostname:8001 / Agile

  Manager node that is configured outside of the folder of weblogic

  Created nodemanager properties file and file field path to the node of file field.

  In addition, added startup script, set the script to start true and assigned to the strartup for the admin server script.

  Path of the application domain registered with all the admin domain Manager node

  In the Console, have set up one machine and mapped all three server on the machine.

  active crashrecovery true

  Later I started the management nodes. He has not started the administration server.

  began to admin server manually,

  A mapped admin nodemanader in Server Manager class path, so that I can start the managed server.

  My JMX managed server setting is

  DCOM. Sun.Management.jmxremote - Dcom.sun.management.jmxremote.port = 9896 - Dcom.sun.management.jmxremote.authenticate = false - Dcom.sun.management.jmxremote.ssl = false

  My JMX managed service setting is

  -Dcom.sun.management.jmxremote - Dcom.sun.management.jmxremote.port = 9899 - Dcom.sun.management.jmxremote.authenticate = false - Dcom.sun.management.jmxremote.ssl = false

  I am getting below error

  *********************************************************************************************************************************************************************************

  CLASSPATH=/ag3/app/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/jdk1.7.0_55/lib/tools.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/ag3/app/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ag3/ app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/ag3/app/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/ag3/app/jdk1.7.0_55/lib/tools.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/ag3/app/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/ag3/app/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/ag3/app/ Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ag3/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/ag3/app/Oracle/Middleware

  PATH=/ag3/app/Oracle/Middleware/wlserver_12.1/server/bin:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/ag3/app/jdk1.7.0_55/jre/bin:/ag3/app/jdk1.7.0_55/bin:/ag3/app/Oracle/Middleware/wlserver_12.1/server/bin:/ag3/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/ag3/app/jdk1.7.0_55/jre/bin:/ag3/app/jdk1.7.0_55/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/ag3/app/jdk1.7.0_55/bin/

  Your environment has been defined.

  Error: Exception thrown by the agent: java.rmi.server.ExportException: Port already used: 9899; nested exception is:

  exception java.net.BindException: address already in use

  < 16 October 2015 01:38:12 > < FINEST > < NodeManager > < waiting for the process to die: 22611 >

  < 16 October 2015 01:38:12 > < INFO > < NodeManager > < server failed during startup, so won't be restarted >

  < 16 October 2015 01:38:12 > < FINEST > < NodeManager > < returned runMonitor, finished setting = true and notification servers >

  *********************************************************************************************************************************************************************************

  
  

  Is it possible that I can start my server managed by Admin? If Yes, what are the steps I have to do to make it viable.

  In addition, which is just how to configure the node Manager autostart administrator and Manager on the same host and server with the single domain.

  NodeManager cannot start Admin and the managed server automatically when you gracefully stop the managed server.

  Recovery setting enabled the crash work in case of a sudden collapse of the host itself. This does not mean that NodeManager servers will automatically start every time. Crash Recovery also works for servers that are started by using Nodemanager only.

  For:

  Error: Exception thrown by the agent: java.rmi.server.ExportException: Port already used: 9899; nested exception is:

  exception java.net.BindException: address already in use

  As says error itself port is already in use. Be sure to use the single port and also check if a process taking into this port.

  See you soon,.

  Naveen

• How can I minimize Firefox in one click when I have several tabs open?

  I used to be able to minimize Firefox with a single click on the icon in the taskbar, even with several tabs open. Now it doesn't let me. Now, when I move my mouse over the FF icon, a pop-up shows all open tabs and I need to find another way to minimize Firefox. I'm missing something here.

  I was right. I unchecked the box in the options that says "show previews of the tab in the Windows task bar" and everything works as I want it now. Thanks again for your help. These things are usually easy to fix, but hard to find sometimes.

• 12.1.0.2 managed Oracle data provider running significantly worse than classic ODP on Connection.Open (3 sec vs 0.2 seconds)

  Oracle managed provider has many advantages over the traditional Oracle for .net data provider.

  However, our test shows who take connection.open 3 seconds, where the classic ODP takes 0.2 seonds. Opens later against the same connection string perform the same way for the two (0.1 seconds). Subsequest opens against a new connectionstring (another basic data) take 2 seconds for the managed provider and 0.1 second for classic.

  This is not acceptable in some cases, but may be supported in others.

  Someone at - it seems a similar behavior? Any suggestions that may improve the performance of connection.open?

  Regards Niels Jespersen

  A bug (20419677) was created to follow up on this matter.

  The problem seems to arise when the EZCONNECT and WORLD settings in sqlnet.ora and tnsnames.ora files. If either one is removed, the slowdown goes away. This can be used as a temporary workaround while a permanent solution is being developed.

• Doubts about Weblogic Cluster and application deployment

  Hi all

  WebLogic...: 12.1.2

  ... OS: AIX 7.1

  We intend to create a Weblogic cluster at 2 knots in different sites to comply with the requirements of the customer HA. With this in mind im a few doubts began to rise:

  (1) this solution will have a server in site A Weblogic and an another Weblogic Server on site B, and we will create a Weblogic cluster with these 2 servers. It is equivalent to an Oracle extended RAC, but with Weblogic. Our link between sites is extremely fast, dedicated, with a latency of less than 5 ms. Is it possible and cost-effective to build such a solution?

  (2) regarding the deployment of the application, I would like to know if it is possible to deploy an application on Weblogic Server just on node A, and this application is automatically replicated on the Weblogic Server in site B? As far as I know, I have to deploy the application on both Weblogic servers manually.

  Thanks for the patience and attention.

  Hello

  (1) this solution will have a server in site A Weblogic and an another Weblogic Server on site B, and we will create a Weblogic cluster with these 2 servers. It is equivalent to an Oracle extended RAC, but with Weblogic. Our link between sites is extremely fast, dedicated, with a latency of less than 5 ms. Is it possible and cost-effective to build such a solution?

  Yes: is very easy to configure the (much easier than configuring PAP) weblogic server cluster.

  Please refer to:

  http://docs.Oracle.com/CD/E24329_01/Web.1211/e24425/overview.htm#CLUST114

  http://docs.Oracle.com/CD/E24329_01/Web.1211/e24425/Setup.htm#CLUST431

  (2) regarding the deployment of the application, I would like to know if it is possible to deploy an application on Weblogic Server just on node A, and this application is automatically replicated on the Weblogic Server in site B? As far as I know, I have to deploy the application on both Weblogic servers manually.

  You can deploy your application on weblogic cluster: his will be automatically deployed to all members of the cluster (all managed servers)

  HTH.

  Borys

• Help on consistency + Weblogic Cluster configuration

  Hello
  
  I am new to consistency. I explore the consistency to fill one of my condition.
  
  My needs: I have an application deployed on a clustered server logical Web environment. I need to cache data specific to the application (java card) and that should be available to all nodes in the cluster WLS. Application that are cached, data can be updated from any of the node in the cluster WLS and updated the application cache data should be available for all the nodes in the cluster WLS. The nodes in the cluster of WLS resides in different machines from different places.
  
  Can I use coherence as a services of caching for my requirement?
  
  If Yes, do I need to start a server cache consistency on each node of the cluster WLS?
  
  If so, do I need to specially configure these servers cache, so that these cache servers would communicate each other in case of updates of data in the cache?
  
  It will be very helpful if you could also provide sample configurations to achieve the above scenarios.
  
  Thanks in advance!
  
  Kind regards
  Srinivas M

  You can start a cache server in the network by using for example

  # home directory
  BEA_HOME="/home/oracle/bea"
  export BEA_HOME
  # java vendor (for example Oracle or Sun)
  JAVA_VENDOR="Oracle"
  export JAVA_VENDOR
  # cache server klasse
  CACHE_SERVER_CLASS="com.tangosol.net.DefaultCacheServer"
  export CACHE_SERVER_CLASS
  # coherence options
  COHERENCE_OPTIONS="-Dtangosol.coherence.management=all"
  export COHERENCE_OPTIONS
  COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.management.remote=true"
  #COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.cacheconfig=WEB-INF/classes/session-cache-config.xml"
  #COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.session.localstorage=true"
  
  WL_HOME="${BEA_HOME}/wlserver_10.3"
  export WL_HOME
  BEA_JAVA_HOME="${BEA_HOME}/jrockit_160_05_R27.6.2-20"
  export BEA_JAVA_HOME
  SUN_JAVA_HOME="${BEA_HOME}/jdk160_11"
  export SUN_JAVA_HOME
  
  if [ "${JAVA_VENDOR}" = "Oracle" ]; then
       JAVA_HOME="${BEA_JAVA_HOME}"
       export JAVA_HOME
       MEM_ARGS="-jrockit -Xms512m -Xmx512m -Xss128k -Xgcprio:throughput"
       export MEM_ARGS
  fi
  
  if [ "${JAVA_VENDOR}" = "Sun" ]; then
       JAVA_HOME="${SUN_JAVA_HOME}"
       export JAVA_HOME
       MEM_ARGS="-server -Xmx512m -Xms512m -Xmn256m -Xss128k -XX:PermSize=128m -XX:MaxPermSize=128m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+UseBiasedLocking"
       export MEM_ARGS
  fi
  
  # classpath for the cache server
  CLASSPATH="${WL_HOME}/coherence/coherence.jar"
  export CLASSPATH
  
  # start the cache server
  ${JAVA_HOME}/bin/java ${MEM_ARGS} ${COHERENCE_OPTIONS} ${CACHE_SERVER_CLASS}
  

  -Dtangosol.coherence.management = all option gives made you some useful information about what the cache by using for example the browser mbean provided by jconsole or jrockit mission control.

  You can create an application in which you create a cache, below is an example of a servlet

  import com.tangosol.net.CacheFactory;
  import com.tangosol.net.NamedCache;
  
  import javax.servlet.ServletException;
  import javax.servlet.http.HttpServlet;
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  import java.io.IOException;
  import java.util.Random;
  
  public class TestServlet extends HttpServlet {
  
      private NamedCache movies;
  
      public void init() throws ServletException {
          movies = CacheFactory.getCache("repl-movies");
          movies.put(10, new Movie(10, "Rear Window", "Alfred Hitchcock"));
          movies.put(20, new Movie(20, "Vertigo", "Alfred Hitchcock"));
          movies.put(30, new Movie(30, "Double Indemnity", "Billy Wilder"));
          movies.put(40, new Movie(40, "Touch of Evil", "Orson Welles"));
      }
  
      protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          Integer[] integers = {10, 20, 30, 40};
          Random random = new Random();
          while (true) {
              movies.get(integers[random.nextInt(4)]);
          }
      }
  }
  

  Package the servlet into such a WAR file and deploy it in a WebLogic cluster configured.

  By accessing the servlet on the different nodes in the cluster a new cache is created and added to the
  already running DefaultServer.

  The most difficult part is to configure your cache. As you can see in servlet initialization we EU something like CacheFactory.getCache ("repl-movies");
  Lack of consistency with some configurations of cache example that are contained in the coherence.jar (coherence-cache-config. (XML).
  The following entry is used

  
        repl-*
        example-replicated
  
  
        example-replicated
        ReplicatedCache
        
          
            unlimited-backing-map
          
        
        true
  
  

  A replicated cache is probably what you need as well. You like all the data available on all nodes. If you want to use
  your own cache configuration, you can add the option - Dtangosol.coherence.cacheconfig (see the for the default server startup script)

  A good introduction on coherence can be found here:
  http://www.packtpub.com/article/installing-coherence-3.5-and-accessing-the-data-grid-1
  and
  http://www.packtpub.com/article/installing-coherence-3.5-and-accessing-the-data-grid-2?utm_source=rk_coherence_abr1_0310&utm_medium=content&utm_campaign=ramsai