several different: crashes, modules and parameters

Similar Questions

• A question about Application module and bounded taskflows

  Hello

  One of my friends sent me this question that I could not answer. The question is:

  
  

  Your application contains a workflow bounded with four pages.

  The pages are all based on different application modules and the workflow has the property of transaction, the value 'Always Begin new Transaction, and a commit operation is defined as the return of the activity. The user makes a few changes on each page, but a validation failure happens on the links on the third page.

  Which of these scenarios describes the outcome of this situation?

  A. None of the changes on pages undertakes all are cancelled.

  B. pages one and two and four engaged; page three is not validated.

  C. changes to the first two pages are validated; changes on the last two pages are not committed.

  D. it depends on the value that has been set in the property Transaction on each module of the application.

  I suggest the answer is A, but the answer my friend is C.

  What is your suggestions

  Thank you

  You are right.

  The point of transaction is that a couple of operation may be validated or cancelled together.

  If a stubborn workflow starts with a new transaction, when he wishes to complete, he must call a task flow return activity validation or cancellation. They call the underlying commit() or rollback() operations on the associated data control framework, essentially validation or restoring all the data attached to the frame controls.

  
  

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/ADF-task-flow-TRANS-Fund-v1-1-1864319.PDF

• Several applications crashing with Faulting Module "StackHash_"... »

  Hi, I'm new and this is my first post.
   
  I'm in this nightmare for several months, any help would be more then appreciated.
   
  Keep a huge list of demands on crash again and again, among them are: Windows Media Player - VLC - COM Surrogate - Photo Gallery Windows Live - VirtualBox - Microsoft Silverlight - Windows Explorer - XPS Viewer - Windows Live Mail - doPDF8 - PerformanceTest - HP SimplePass - TeamViewer - Windows support center - and many others.

  When you look in windows "Action center" in the "reliability monitor", most of them were listed in the field 'Fault Module name' something 'StackHash_' followed with four numbers or numbers. for example, "StackHash_7001" or "StackHash_4ac5". A few other applications overwritten is the module failed 'ntdll.dll '.

  IV ' e searched all around solutions to this unfortunate problem, the solution only so-called for it I found some answers so that he could have to do with DEP and they advised to turn off DEP for these applications crashing, but this isn't a solution at all because my system is 64-bit and so are most of the applications , and "you can not set DEP attributes on 64-bit executables."

  IV ' e had already restored my laptop to a factory State. but the same thing again later.

  PLEASE CAN SOMEONE HELP ME?

  I use Windows 7 Home premium edition, on my HP Pavilion dv6-6c13cl.

  UPDATE:

  Already found the cause of the problem, it's an update of windows as an option for the "Advanced Micro Devices, Inc. - Display, other hardware - AMD Radeon (TM) HD 6520 G. Uninstalled, and so far, everything is OK.

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• Not different session among v$ session and parameters of v$ resource_limit

  Dear Frieends,
  
  
  I have a confussion on two parameters, one is "v$ session" and another "V$ resource_limit. Look at the following result:
  
  SQL > select to_char (sysdate, ' ' Dy DD-Mon-YYYY HH24:MI:SS) as 'Current time' from dual;
  
  Currently
  ---------------------------------------------------------------------------
  Monday, March 9, 2009 17:02:06
  
  SQL > select count (*) in the session of v$.
  
  COUNT (*)
  ----------
  271
  
  SQL > select * from v$ resource_limit where resource_name = "sessions";
  
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
  ------------------------------ ------------------- --------------- ---------- ----------
  sessions 280 408 445 445
  
  
  I see here that at a point given to the database, the number of meeting of the session $ v "271" so that the number of session in the "v$ resource_limit" is "280". Here, I get some differ among these parameters.
  
  Everybody would say please why the number of sessions differ between v$ session and parameters of v$ resource_limit.
  
  Waiting for your kind response...

  There are several bugs related to v$ resource_limit and current usage.
  For example check metalink Note 3896119.8

  and this current_utilization rapidly changing over time. So it can be simply you are not able to measure at the same point in time both views.
  And v$ session is most trustfull to find current sessions.

• I received an error crash report and submitted for evaluation and to restore the tab. Generally, what causes this?

  The error report crash struck at 07:49, and when I checked my security log I saw that there were two cases of access to internet at 07:49 and an instance of crashreporter.exe internet access at 07:49 sandwiched between the two instances of firefox.exe has firefox.exe. I don't understand why there are these two firefox.exe apps because I had started my Firefox browser at 07:06. Could the accident report was generated by a certain time trying to hijack my browser? I ran two different virus programs and they have negative results and otherwise, everything else seems OK. Any idea would be appreciated. This has never happened before, and I've been on a regular blog, I read a multitude of well known blog.

  For all your discussions that are empty, which means something corrupt them. (This isn't a hacker, firefox.exe will close and open crash reporter, then re - open firefox).

  So, this is your best bet in the future: make sure you are running Firefox 17.0.1, update all software for windows (running Windows update several times), update your graphics, using malwarebytes and then virus scan driver reset Firefox. Refresh Firefox – reset the parameters and modules

• How to put running or OFF controls the mouse on laptop or how do I get rid of modules and toolbars like conduit, spirit and friend spark Checker?

  Hi, are two quick questions, there any settings of the mouse on laptop computers. I use a mouse usb right now about this because the finger mouse does not work.

  are there ways to activate and deactivate? and how can I get rid of modules and toolbars as auditor of conduit and friend and spark of spirit? any help would be great. Thanks in advance

  Original title: CONTROLS the MOUSE for laptop

  Hello

  Thank you for your question to Microsoft Community.

  Quick questions:

  1. What browser version are you working?
  2. What is the brand and model of the laptop?

  Case 1:

  Mouse, touchpad and keyboard problems can have several causes:

  ·         Cables that are not connected correctly

  ·         Incorrect device settings

  ·         Missing updates

  ·         Corrupt or incompatible drivers

  ·         Hardware problems

  As a first step, you can check the status of the devices by following the steps mentioned below:

  a. click Start, type Device Manager in theStart search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. click Pointing device and check its status.

  Method 1:

  To enable the touchpad try these steps:

  a. click Start and select Control Panel.

  b. Select mouse.

  c. click on Device Settings.

  d. Select the touchpad device.

  e. click on turn on.

  Note: The steps above are generic to any model of laptop. The parameters may vary depending on your model of laptop.

  Method 2:

  If activation touchpad does not help, you can go ahead and uninstall the drivers of the touchpad and re - install the same thing again.

  To uninstall the touchpad drivers,

  a. click Start, type Device Manager in the Start search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. right click on the Touchpad driver and select Uninstall.

  d. restart the computer, if prompted.

  Also I suggest you to consult the following link.

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Case 2:

  Now for the question of the toolbar, if you use these methods follow Internet Explorer:

  Method 1:

  If an unwanted toolbar appears in Internet Explorer, you can turn it off using the Add-ons Manager. Sometimes, however, the problem may be more persistent. If the problem persists, start Internet Explorer in no add-on mode and then use the add-on Manager to disable all add-ons that you have not intentionally installed.

  You can see the following link for more information:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-8

  Method 2:

  Most toolbars can be removed using Add / Remove programs.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  You can also use the specific toolbar removal tool to uninstall or remove the toolbar from the computer.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thanks for posting the result and let us know if you need assistance on Windows.

  We will be happy to help you.

• Microsoft Support pages are not viewable in Firefox (I tried to disable the modules and plugins)

  When trying to view a Microsoft Support article, I see the following (attached). It lacks all the text. This seemed to be correlated with the installation of 35 Firefox or Google Chrome 40.
  It does not correctly in IE 11 either.

  I tried to disable modules and Flash enabled. I find it very strange. I use a strong security product, have the latest version of Flash Player (although I turned off after that I tried to reproduce the problem because there is currently a 0-day).

  Here is an example. (I tried several examples - including those of the previous months to see if it was a mistake to content at their end).
  http://support.Microsoft.com/kb/3019215

  I thought it was a HTML problem, but I can watch YouTube with Flash Player disabled in Firefox.

  Does anyone else have this problem?

  Any help is appreciated!

  Me: Windows 7 64-bit
  Latest version of Firefox, IE and Chrome, Windows is up-to-date.

  I am again able to see the content on MS articles including

  • https://Support2.Microsoft.com/kb/3019215

  Maybe what I saw, it was the result of a temporary problem with the servers.
  This article is titled

  • MS15-008: A vulnerability in the Windows kernel-mode driver could allow an elevation of privilege: 13 January 2015
    • and the initial intro
      

      Microsoft has released the MS15-008 security bulletin. Learn more about this security bulletin: individuals:
      https://www.Microsoft.com/security/PC-security/updates.aspx
      Skip the details: download the updates for your desktop computer or laptop from the Microsoft Update Web site now:
      https://update.Microsoft.com/microsoftupdate/
      It professional:
      https://TechNet.Microsoft.com/library/security/MS15-008
      ... < snip >

  ....

• I have Windows Vista Home Premium. Recently cannot send or receive Window Live Mail 2011, has several different error codes 0 x 8030107, 0 x 8004849, 0800106ba, 0 x 8004820

  I have windows Vista editions Home Premium, the problem:

  Can't send or receive messages for the Windows LIve Mail Hotmail account (ridgerunner6).

  Server error: 0 x 80048820
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048820, 0 x 8030107, 0 x 8004849

  at different times, there are several different error codes 0 x 8030107, 0 x 8004849, 0800106ba, 0 x 8004820, Server error: https //mail services.live.com/Delta Sync_ v2.0.0/Snyc.aspx'

  I did some checking and all simply unable to solve the problem

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• PC Windows Vista stops unexpectedly. Sometimes several times a day and sometimes not at all.

  My Windows Vista PC completely stops unexpectedly and without warning. Sometimes several times a day and sometimes not at all. When I turn it back on, sometimes I have a blue screen that tells me that the PC has experienced an unexpected shutdown and communicate with my local technician. However when turning on, I am always able to return to my office. My anti-virus support told me that it is not related to a virus. Help!

  It is likely some equipment or device driver issue (although we can not entrierly a problem of software).  I need a lot more information on this blue screen - EXACTLY what it says Word for Word with all the codes.  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7  I know it's long but a blue screen problems problem may take some time because there are so many different causes and we must find the right to try to identify the problem and then find a way to fix it.  One of the elements in his post is a method to prevent the system to reboot when a blue screen if you have the time to copy the information.  If the system is not turned off, but the screen does not stay up long, press prtscrn to copy the screen, then when the system boots to open Microsoft Paint, click on the Open box and click Ctrl + V to paste here you have plenty of time to copy the information and post it here so we can look at.  Do not forget to include EVERYTHING - it is unclear what could be of crucial importance.

  I repeat the procedures in the messages of the spirit in the link above - just follow them and answer back here with the results.  Want to make interim reports before the end of the stteps is perfectly OK - in fact, I suggest you do that so I can help guide you and maybe eliminate some of the steps because they will provide no information, that we don't already know (or will not solve the problem because of the information that we already know.

  A question, is your so hot PC anywhere on it that if you hold your hand on it, you will need to detach due to heat?  Overheating is a common cause of this type of problem.  Check that the fan doesn't work and all intake and exhaust ports are clean of dust, lint, or any other obstacle.  If this is a desktop computer, remove the cover and clean the entire interior to remove dust and lint and anything else that doesn't belong.  Make sure you do not loosen or detach the wiring or the accessories cards or RAM chips.  Don't bother if it's a laptop - it's too difficult to get inside to do a proper clean-up - just make sure that the fan is running and that the vents are clear.

  I hope this helps.  I look forward to your reply with your comments about what you did to the spirit and procedures for detailed information on the blue screen error.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Channeling ether on two different sfp modules

  Hi Experts,

  I would like to know if a channel of ether can be created using two different SFP modules IE using

  GLC-sx-mm and glc-lh-sm on a switch or any other device.

  Thank you

  Abdul Malik.

  I have tried something like this in production. But bearing in mind that you can group copper and SFP interfaces in etherchannel so they have the same speed, L2/L3 config etc I think it's possible... but not 100% sure

  HTH,
  Dragan

• ASA with different failover module IPS

  Hi all

  Is it possible to configure the failover of the ASA with different IPS module configuration because we have: ASA 5585-X with firepower PHC-10 and ASA 5585-X with IPS SSP-10

  Thank you

  N °

  Inventories of material (basic unit, memory and optional modules) must be the same in a pair of failover ASA.

• GlobalEventListener: to distinguish between system module and gui entrypoint

  Hey. I have an application with a system module that should always run and a gui with a EULA entry point. Once accepted the EULA, I want the gui to close application and the module of the system to begin running. (It works on battery pull, but the goal is to avoid asking the user to do).

  eventOccurred in GlobalEventListener fires twice, I guess once for the module of the system and once for the GUI. Two apparently weird things happen. First of all, when I use a global boolean to make a distinction between the sysmod and GUI, GUI screen is stuck and the sysmod seems to be exited. (Or I tried passing the processid of the sysmod and just exit with a different id - the GUI.) Same effect).

  Then when I remove the and check only for the guid of the global event, the eula, the sysmod screen farm stop logging but an icon of the application with the generic blue icon are still there in the app selector (hold the menu button).

  All I want to do is start the system module and close the EULA gui, so that the user need not cold start. Thanks for your time... code below. J.

  class MDB extends UiApplication implements GlobalEventListener 
  
    boolean thisIsSystemModule;
  
      // In main(  )
  
          if (arg0.equals("gui")) {
  
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(false);
              globalMDB.addThatGlobal();
      }
          else if (arg0.equals("activatesysmodandexitgui")) {
  
              MySystemListener msl = new MySystemListener();
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(true);
              globalMDB.addSystemListener(msl);
  
              globalMDB.ScheduleNextBackgroundChange();   
  
                  String logMessage = "MDB has both setup and scheduled a bg change.";
                  EventLogger.logEvent(0x4c9d3452d87922f8L, logMessage.getBytes(), EventLogger.ALWAYS_LOG);
                      System.out.println("\n\n>>" + logMessage);
  
              // post global event for eula to listen to and close
              globalMDB.addThatGlobal(); 
  
          //// Event ID comes from MDB.Start.System.Module.And.Close.EULA.GUI  0x5395aca2ff6df828L
              ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
              int smprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
           ApplicationManager.getApplicationManager().postGlobalEvent(0x5395aca2ff6df828L, smprocessid, 0);
  
              globalMDB.enterEventDispatcher();
      }
      else {
          // code for battery pull
      }
  
      private void SetSystemModuleFlag(boolean flag) {
  
          thisIsSystemModule = flag;
  
      }
  
      private void addThatGlobal() {
  
          addGlobalEventListener(this);   
  
      }
  
      ////  Called when user accepts the eula. EULA is gui entrypoint. I want the gui app to exit and leave just the system module
  
      private static void StartSystemModule() {
  
              int modHandle = CodeModuleManager.getModuleHandle("MDB");
              ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(modHandle);
              ApplicationDescriptor appDescriptor = new ApplicationDescriptor(apDes[1], new String[] {"activatesysmodandexitgui"});  // we want the system module
  
              try
              {
                  ApplicationManager.getApplicationManager().runApplication(appDescriptor);
              }
              catch (Exception e)
              {
                      System.out.println("\n>> Problem starting system mmodule\n");
              }
  
      }
  
  public void eventOccurred( long guid, int data0, int data1, Object object0, Object object1) {
  
          //Is this the GlobalEvent we are waiting for?
          //Long = com.samples.globalEventFiring.GlobalEventFiring
          ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
          int thisprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
          if (guid == 0x5395aca2ff6df828L)  //  !thisIsSystemModule &&         data0 != thisprocessid &&
          {
                  System.out.println("\nEvent received, eula exiting now.");
                  System.exit(1);
          }
  }
  

  Hello. The whole situation turns that arose because despite searching, I was not in the current Modules of the system to start when the application is installed (or opening). I knew only that they were running at startup, then in the absence of a way to start them from code, I asked users to cold start their phones!

  Although I do not understand what caused this error, it might have something to do with the planning of a timer job or adding a listener to an instance of the application system, and then exit the application before the timer is due to run it. Could someone with more understanding fill in us, on what it would do, but unless there is another way, I wouldn't do it.

  The solution was to do nothing. Delete all of the code to start the module of the system. And the other thing of smaller was to detect whether the instance is the module of the system or the gui entry point, Yes, you can use a global var but not a static. In acceptsForeground, you just check this global var defined in the hand and to be sysmod, false return.

  Will seek some of the discovered books recently, in order to aim to post 2 days a week only I think that in the future.

  TKS

  J

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com