Several entries of stream serial

Similar Questions

• Try to uninstall build Munki 3.1, does not work and leaves several entries in the registry

  When I try to remove build Munki 3.1 a few days ago. However, direct the directory uninstallation fails generally as the Build Munki 3.1 leaves several entries in the registry of the computer. How should I do?

  * original title - how should I do? *

  Hi jacob,

  If the standard uninstall process is not working (as seems to be the case), then try to use the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html that often works when the usual process does a complete job.  I know for a fact that in advanced mode, there's a special process which deals expressly with clean up the leftovers of the program register.  Personally, I use Revo to uninstall everything that I want to uninstall (more with AV products special removal tools) because almost all normal uninstall process leaves something behind (I had to remove the remains on almost each uninstall I made using Revo) and this will keep my own system.

  If you have already uninstalled to the point that it does not appear as an option in Revo, then reinstall again and then uninstall with Revo in advanced mode and this time and that should do the trick.

  I hope this helps.

  Good luck!

• I have a laptop on vista home-use. When you look in Control Panel - be uninstall, should there be several entries for SQL server, or one or none?

  I have a laptop on vista home-use.  When you look in the control panel - and then to uninstall, should there be several entries for SQL server, or one or none?  Each entry seems to have a different digital denotation, but apparently I should have only one entry maximum.

  The reason that I ask is that I have had problems in the software.  I want to uninstall everything that is not supposed to be there.

  Some lines of programs listed show information... some lines are completed.

  When you click on a line that is complete, I am allowed the usuall to uninstall, options etc.

  When you click on a line that is not complete, I'm not allowed the option uninstall.

  The Compact Edition and the full SQL Server can be installed at the same time without any problems. I saw SQL Server2005 apparently installed by a manufacturer, perhaps to support some software they have grouped in. He could have an Acer.

  I do not know what cause the problem with the uninstall option is not available. Information to fill in these fields are in the registry.

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall if you want to watch.

  It could be the result of a broken uninstall or a bad registry cleaner. I'm not aware of anything that would fix this. You can try this http://support.microsoft.com/mats/Program_Install_and_Uninstall

  but you may have to reinstall programs later.

  You need two redistributable Visual C++ if you have programs that need it, which is likely. They had several updates that fits into the list programs. I have two for 2005 and six for 2008.

• OptionsProvider: Options screen displays several entries for app

  Hello

  I have 2 classes in my application (say hand and ConfigProvider). The ConfigProvider implements the OptionsProvider. Start the application, the instantiatesthe ConfigProvider hand. The ConfigProvider registers with the OptionsManager.

  When I run the application several times, I see several entries for my application screen blackberry options! The strange thing is that the number of entries that added to the screen options is not proportional to the number of times that I run the application. The behavior is very random. Sometimes I just get 2 entries and then left to 2, however when I run the application.

  The documentation for the register call, I know it will only work for once.

  If someone has come across something like this before? Can anyone help me regarding this?

  Kind regards

  TEJ

  But after a device is reset, your provider instance Options will have been deleted, not in any case this is the desired behavior.  Resetting the device deletes RuntimeStore.

• Several Modbus with shared serial port

  I know that Lookout lets do you cool things like have several protocols series that share the same serial port hardware.

  I asked where I might like Lookout to simulate a network of Modbus Devices for some tests. In this case, I want to implement multiple Modbus slave, all with different node addresses Modbus objects and have all listen to the same serial port. Would this be possible? Each received Modbus message will include the number of slaves in there. Multiple objects can listen on port and only the selected one respond?

  Thank you

  Max

  Yes, slave modbus Lookout can work this way.

  But the ethernet mode does not support.

• several entries of channels in the single string output

  Hi all

  This program is needed for my purposes of simulation of demo, I created several string entries to display in an single string output Update (input strings are shown in each line). I have attached the picture below, put the 2 channels of output w/c both unresponsive to my desired outcome:

  1.) 1st output string - replace the old string w / new channel. what I need is to also maintain the previous channels. the new channel will go to the next line.

  2.) 2nd out of chain - although I got all the channels that I needed, it only appears on the right after the while loop ends, so I couldn't update string entries.

  I use LV 8.5.1, any help is appreciated... post your correct code will be more appreciated.

  Thanks in advance...

  

  You can also use a node Feeback. Note that you can use the Format function in the string to create your lines.

• Several devices on Stream 8 Bluetooth pairing

  Hello

  I just wanted to know if its possible to pair 2 or several devices such as the mouse Bluetooth and a Bluetooth keyboard on stream 8 and simultameously work on both?

  Kind regards

  Hrishikesh

  Hello

  Keyboard and mouse Bluetooth Bluetooth work wonder, at the same time.

  I have HP Bluetooth keyboard T800 paired with 8 HP flow, just got one case iBall mouse tried bluetooth pairing with 8 Stream and here we go!

  Keyboard and mouse are paired and works like charm.

  More importantly, I have my free to load usb microphone, USB key, etc..

  Almost want to mini computer, mouse and keyboard, extremely portable and easy to carry.

  Kind regards

  Hrishikesh.

• Several entries of the dynamic map (policies of the phase 2) on SAA

  Hi all

  I have a setup where I set up VPN remotely on my ASA. I came to a situation where I wanted to allow the two IPSEC client using cisco VPN client and android phone using L2TP/IPSEC

  What is happening is that I want to use PFS for IPSEC clients, but my android phone does not support this. Then I tried to create two sequences in my dynamic crypto map, but the first sequence is always put in correspondence and therefore ike phase2 fails. If I put the sequence without PFS first, he will be first, and my client IPSEC uses both PFS...

  If I remove the PFS, fine.

  So is there a way either the AoA match to multiples of phase 2 policy, I mean not only several transform set in the same order, but also for pfs in my case.

  My L2TP client using authentication rsa - sig and are dynamically mapped to a tunnel-group, so I thought maybe we can specify map entries different crypto depending on the authentication method, but it seems that the only option that we linked to this is for card crypto inherited, where we can choose the trustpoint for outbound connections.

  So if anyone has an idea, I would be interested, otherwise, I guess I can leave without PFS...

  Unfortunately not with PFS, as part of the overall transformation (for example: ESP-3DES, etc) then you can set several transformation under 1 dynamic map. However, not for PFS that you only have 1 option either turn or off as PFS is optional.

• All of a sudden see several entries duplicated in console.app - bad sign?

  All of a sudden I started to have multiple, duplicate entries in the console.

  Can someone explain this?

  

  What functional problem you have, if any? Log messages are not a problem in itself.

• Several entries of IP addresses listed for the OD Master

  My Open Directory Server works well, but I have a question about the first table that appears in the section Open Directory of the server application. The name of the server and Type are correct, but the address field has 5 IP addresses listed, two of which I do not recognize and which is a duplicate:

  

  I have deliberately obscure potentially sensitive information, but the first entry is a valid and functional FQDN for the master of the OD. The IP addresses of the first and the last appearing on the right side are actually the same address (this is the address that resolves the FULL domain name, PTR record for the IP address resolves the FQDN name). I have no idea why it appears twice and I don't know if I should be concerned about it. Audit of intellectual property returns a green light:

  $ sudo changeip - checkhostname

  dirserv:success = 'success '.

  The second (172.16.32.1) address is the IP address of the interface of the virtual server that is used by the VPN server, where it is expected. The entries of third and fourth, however, are unknown to me and I don't know where they came from. These two addresses are on the private block 172.16.0.0/12, so that they are non-routable.

  Is there a way to update or remove these stray addresses of my OD server config? Should I worry about them? What about entries double for the real IP address?

  Small update: I just tried to restart the server, and the second instance of the 'main' intellectual property disappeared. I still have two 172,16 stray addresses listed, however.

• SMU 6341 and SCB-68: problem with several entries... * URGENT *.

  Hello

  I have an urgent problem, I would really appreciate help with.

  I have a terminal block (SCB-68) connected to a multifunction data acquisition (6341). There are 4 entries in the Terminal:

  1 sensor laser displacement, coming from a controller as a signal of analog voltage output ("1V" and "0V" on the controller). Connected to AI 0 and GND.

  2. The accelerometer (PKI, coming from a then the voltage signal conditioner) connected to GND AI and AI 10.

  3 load cells (PKI, coming from a then the voltage signal conditioner) connected to AI 11, 12, 13 and 14, each connected to the GND PIN is close.

  Problem:

  By MAX, if I read in 6 channels above my data acquisition (6341), my displacement sensor (#1) and the accelerometer (#2) behave very well. However, among the channels (AI 11 and AI 12) load cell switch in tension, as if they follow the movement sensor voltage (#1). For example, there is usually a mV - 800 in AI 11 voltage change.

  This problem disappears when I'm not reading travel (HAVE 0, #1) laser. that is as soon as I remove this channel of my task, the readings of cell and accelerometer support back to normal (base voltage ~ 0V). Yet once if I ask again the laser channel, I see a vertical movement in the readings of load cell 2 (displacement varies with the current tension HAVE 0).

  Attempts of fixation:

  -tried to change the differential using AI laser sensor 0 and AI 9

  -tried to delete the field of laser 120V Power

  Any ideas at all would be greatly appreciated!

  SCB-68:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  SMU-6341:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207415

  This is the general idea.  If you must use high impedance sources and that you have enough channels available, placing a channel of the grounding of entry between each other usually helps.  You must analyze these chains grounded.  Just grounded isn't them enough.

  Example: Sensor has = AI0, ground = AI1, sensor B = AI2, ground = AI3, sensor C = AI4, AI5 = ground.  Read AI0:5.

  Lynn

• Obsolete devices in the AutoPlay list & several entries for the same devices

  I would like to remove 4 entries for "Canon PowerShot A75" on the list of automatic run settings since I no longer have this camera.  Can someone tell me how to remove these?  (I have Vista Home Premium SP2)

  Someone else has multiple entries in the auto playlist for the same device?  Someone managed to remove them?

  Vestalite,
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Always back up the registry before making changes.  See this article on how to back up and restore the registry:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  It is possible to manually edit the system registry to remove the AutoPlay handlers. The AutoPlay handlers are stored in the following registry location:

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\Handlers\

  Above registry key stores the Settings Manager, which is the action to perform when selected on AutoPlay.

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\EventHandlers\

  Above registry key stores the names of different events, which contains associated managers. Which mean all entries added as value to the event will appear as an option when the particular event occurs and the trigger AutoPlay menu dialog box.

  Let us know if this solves your problem.

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Obsolete devices in the AutoPlay list & several entries for the same devices II (how to remove Iphone in Autoplay device)

  I read the article "obsolete devices in the AutoPlay list & multiple entries for the same features" and did what they said on the registry change, but I can't seem to find what I'm looking for.

  I had an iphone and he sold on ebay, now in my autoplay menu, there is my iphone device listed in DEVICES. I would like to remove it, but there is no option to do this. I looked everywhere in the 'managers' and 'eventhandlers' regedit, but I can't find the name of my iphone or whatever it is about the iphone in particular. So I hope that someone could lead me in the right direction and it would be very appreciated. Is there a specific code or name for the iphone in regedit?

  Hi arande1a,

  I would like to know what article you're talking about, please give the link for the same.

  I suggest you try the following steps:

  Step 1: Disable Autorun

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) turn off the AutoPlay use for all media and devices check box, and then click Save.

  Restart the computer and check.

  Turn on AutoPlay

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) select the game to use automatic for all media and devices check box, and then click Save.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Let us know if you find iPhone mentioned in the following registry key location.

   

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\ device management

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DCM9900 how to configure DCM to receive entries of stream unicast

  Hi all

  I have problem to configure to get the input stream in unicast with interface on DCM9900 Gbe? Can you guide me the steps to set up? I tried to find the document, but I have not found any configuration guide. Thank you very much.

  Best regards

  Oak

  Dear

  Please find below configuration for DCM.

  1. configure the IP address of the GbE card.

  2. set the default gateway for the GbE port.

  3 configure the default values for port GbE

  Setting the address IP of GbE

  1 in the DCM main window, click Configuration. The Configuration window opens.

  2. double-click on the map of GbE. The Interface window opens in the Configuration page.

  3 in the appropriate boxes, type the IP address that is assigned to this port and IP address subnet mask that belongs.

  Important! The bytes of the IP address must be separated by points.

  4 click on apply to make the changes permanent.

  5. Repeat steps 1 through 4 for each additional card of GbE.

  6 keep this window open and continue with setting up the default gateway for a GbE Port.

  Configuration of the GbE card

  Configure the default gateway for a GbE Port

  1 in the DCM login window, click Configuration. The Configuration window opens and shows the system settings pane.

  2. double-click on the map of GbE. The Configuration Interface window opens for the GbE card.

  3. click on links. Roads Configuration window opens.

  4 in the route add new static table, follow these steps:

  Select the appropriate port (1, 2, 3, or 4).

  b click the default gateway box for this setting.

  c in the gateway of the field, enter the IP address.

  Note: The bytes of the IP address must be separated by points.

  5. click on add to make these changes permanent.

  6 continue with the implementation than the default Port GbE values.

  Implementation than the default Port GbE values

  7 in the Login of DCM window, click Configuration. The Configuration window opens.

  8. double-click on the map of GbE. The Configuration Interface window opens for the GbE card.

  9. click on default settings. The default Configuration settings window opens.

  10 in the start IP address field, enter the address IP of GbE for the output device.

  11 in the Port UDP start field, enter a starting UDP port number.

  Tip: To help you track and manage services, give the number of port UDP departure the same number as the Source ID on the DNCS.

  12 in bitrate (Mbit/s), enter 3.75.

  13 click the arrow of the increment scheme and select the Port UDP + 1.

  14. click on apply to make your changes permanent.

  15. go to the creation and activation of Services

  Thank you

  Please rate if this will help you

• access crypto-list with several entries

  Hello

  I need establish a L2L tunnel from a remote location to an ASA5540.

  Guide de Configuration ASA5500 educating to create an ACL extended to connections of control based on the source address and destination and gives the following example: "permit l2l_list of access list range 192.168.0.0 255.255.0.0 150.150.0.0 255.255.0.0.

  All ACL examples that I found is in one line.  In addition, in ASDM you can only specify a local subnet and a remote subnet.

  I can define an ACL includes several lines, one for each local subnet?

  Example:

  extended access list l2l_list allow 192.168.33.0 255.255.255.0 10.0.0.0 255.0.0.0

  extended access list l2l_list allow 192.168.33.0 255.255.255.0 172.16.0.0 255.255.0.0

  The problem I encounter is that users on the remote site should have access not only to the ASA 5540 local network 10.0.0.0/8, but also a few others like 172.16.0.0/16

  albert_coll wrote:
  Hello,
  I need to establish a L2L tunnel from a remote site to an ASA5540.
  The ASA5500 Configuration Guide instruct to create an extended ACL to control connections based on the source and destination address, and provides the following example: "access-list l2l_list extended permit 192.168.0.0 255.255.0.0 150.150.0.0 255.255.0.0".
  All the ACL examples i found consists in only one line.  Moreover, from ASDM you can only specify one local subnet and one remote subnet.
  Can i define an ACL including several lines, one for every local subnet ?
  Example:
  access-list l2l_list extended permit 192.168.33.0 255.255.255.0 10.0.0.0 255.0.0.0
  access-list l2l_list extended permit 192.168.33.0 255.255.255.0 172.16.0.0 255.255.0.0
  The problem i face is that users at the remote site should not only access the ASA 5540 local network 10.0.0.0/8, but also some others like 172.16.0.0/16
  

  You can specify the number of rows that you want in a crypto map access-list. If ASDM, which I use, does not let you then you can certainly do it from the CLI.

  Jon

  
  

  Cisco currently give money to call Haiti earthquake for each side of the sort it please consider note all useful messages.